2002 BMW 745I WATER PUMP REPLACEMENT E65/E66 N62
ฝัง
- เผยแพร่เมื่อ 8 ก.พ. 2025
- If you live in the Chicagoland area i would be glad to service your vehicle. I could be contacted at knightsmastertech@gmail.com.
2002 BMW 745I With a E65/E66 engine & N62
Things I replaced:
*Water Pump
*Serpentine Belt
*AC Belt
*Alternator Cooling Hose
*Engine Cooling Pipe
*Thermostat O-Ring
There is a cut out on the drive pulley for locking the crank when setting the engine timing. If you rotate the engine to put that cut out directly in front of that water pump bolt, you can take the water pump off without removing the pulley. Tilt it off and on. Good video.
OMG!!!!!!!!! THANK YOU SOOOO MUCH!!!! I just replaced my bad water pump by following your awesome directions!!! I have a 2002 745i ..your detail was very important!! you saved me a lot of money doing it myself!! keep it up, if you do anymore work on a 7 series PLEASE share...lol..Rob...
BigRob Chavis your welcome
Hi I have a 2005 745i BMW would my pully come off the same way? And was it easy to put back on?
Thanks great info. You can actually remove the water pump without removing the drive pulley, the bottom screw can be loosened and backed right off then tilt the pump backwards and jiggle it about a bit.
Agreed. I just backed the bolts on the pulley off to get it out.
This was very helpful - thanks for posting!
Wow very helpful keep up the good work bro
The video is a great help, but I need your help on one small detail. Do I need to loosen or remove the large nut in the middle or does the pulley just slid past it, once the 7 T-45 screws are removed? I have a '06 750LI. Thanks!
You can do it without removing the vibration damper, just remove the belt tensioner, cut 10mm wrench in half, and after you remove it shorten the bolt behind the vibration damper by 3-4mm.
@knightsmastertech where you been bro? were all worried something bad happened to you.
I got a 2003 745li and the car is leaking coolant. When the car engine is on but parked it doesn't leak...but as I start to drive it, it starts to leak alot of coolant. Where do you think the leak is coming from?
Hello sr. Is a great video I have a question you was used any seal or glue ? Or no need any thanks for answer
i came here to see only if you was going to bleed the system. but you mention in the video this is a self bleeding system. is that exactly true ? Because im thinking about replacing my water cooled alternator myself before i get rip off.. but i know i have to bleed the system after the job but i dont know where the start if i did , but mention its a self bleeding system... what do i have to do after im done ready to add fluids?
Just add fluid the system want get air bubbles.
+Knights Master Tech ok thank you bro
I have a bmw 745 Li my car never ran hot ,
The belt popped & seen that waterpump clutch also broke !! I need to know if I can just change the clutch pulley & replace belt ?????????
email me your number @ knightsmastertech@gmail.com
email me your number @ knightsmastertech@gmail.com
How do I send my number
at that email address
at that email address
How does the self bleeding system work? Does it mean you don't have to loosen the valve?
Eli Matrix yes that's exactly what it mean.
Ok. Thank you.
Eli Matrix ur welcome
Hey i just replace mine but i still have a leak. Any idea what might be the leak. It looks like is coming from the alternator
Oscar Macias oil leak or coolant?
Coolant leak but it was a bad gasket on the pipe to the alternator
how did you get the fan off of the water pump you did not show that part bro
Gary Lennon bought a wrench from Menards and used a pry bar to hold the screws on the pulley
But be careful the water pump OEM pulley is plastic, mine shattered
How much torque you put on the water pump bolts?
I'm not sure right now. I would have to look it up
Can I use hose and clamps on a thermostat that is designed for clip hoses
Yes
How did you get that striped torx bolt out?
how to remove the AC air compressor
how much would this cost by an independent mechanic
email me at knightsmastertech@gmail.com
email me at knightsmastertech@gmail.com
spring 12 did you email me?
How did u get that stripped bolt out?
sorry I don't remember stripping a screw doing this job.
Very helpful video.Thank you very much!
Opps. I meant ...slide pass it...
He has lower timing cover leaks bad I can see from all the oil, changed all my seals valve cover etc these cars are known for the leaks
Diagrama
Just fyi for people doing this work, to remove the Fan with Fan Clutch THE BOLT OPENS CLOCKWISE NOT anticlockwise..
No its counter clockwise.
skipped too many steps
i came here to see only if you was going to bleed the system. but you mention in the video this is a self bleeding system. is that exactly true ? Because im thinking about replacing my water cooled alternator myself before i get rip off.. but i know i have to bleed the system after the job but i dont know where the start if i did , but mention its a self bleeding system... what do i have to do after im done ready to add fluids?
it's not a self bleed system, ,,, the bleeding screw it's on the antifreeze reservoir