yeah not to many of us made that turn due to the gates making it tighter then your some were ready for, for sure a fun place to go, if your ever in the area they are open Monday through Friday, the Owner and all the staff are very kind and helpful and with the store if you break something crawling or racing you can just get a new one :D Thanks for being kind. have a great evening, Happy Trucking!
A boot mat from Walmart works great. I used a yoga mat to for a while. The boot mat is a hard plastic with sides and it helps contain stuff if you drop something. They are black but you can cut a yoga mat and put it in the bottom of the boot mat. Then you can see the black screws if you drop one.
It’s always a good time, Nate the manager just redid the waterfall and added a small pound with a bridge, there’s always more coming, hope you give more videos a chance, a lot of people coming together to make these events happen, I’m just a guy that enjoys editing a show as well :D happy trucking! Thanks for watching
Hey JT Jet! I like that facility at Baker Hobby! The new owner is Awesome and open for anything there at Thunder Alley! You guys looked like you had fun and had pretty good runs! I use some small Star washers on those areas and holds great! I been using marine grease on my RC vehicles for over 15 years or more and I haven't had very many issues! Great video I'm out of Princeton Mn I'm running TRX 4 Blazer, Trailfinder II Toyota, Axial SCX 10 Jeep and alot of others 1/7 UDR's and 1/5 electric & gas🤔😉👍📹👋👋👋✔️💯
heck yeah thanks for the info, star washers on what areas? can you timestamp where you mean, i talk so much :D i cant remember from a month ago now. if not no worries :D i for sure gota get some of this dry grease or marine grease, look forward to seeing your rigs and showing off on the vids :D thanks for the kind words!
@@JT_JET Ya on the modified skidplate bumper on the back of the TRX 4 Sport I've placed them between the piece and the frame rail and holds really well or you could drill another hole on both side above in the skidplate and into the back crossbrace that holds the frame rails together all kinds of options!😉 I've used dry Graphite lube in tranny gears, but I only use Marine grease on axles and diff gears and housings all depends on what your running in?😉😂🤣😂
@@terrykuehn2686 oh I see what you mean I think, I don’t have material on it now but yeah I was thinking adding some material and making another hole, thanks again for the info!
You need a Bambu labs x1 carbon printer and a roll of nylon carbon Fibre, a bunch of cheap pla and tpu and poly carbonate. There's free upgrades all over the internet made by other enthusiasts for free. It's an expensive printer but it's cheaper in the US and has lidar so no failed prints. It's made by a bunch of former dji engineers and prints faster than 10 printers with the same quality. Buy cheap grey pla for cosmetics because you can sand and paint with rustoleum to look like metal. You can print a million gaskets with the tpu and save the expensive carbon Fibre for important GameDay spare parts. Great video.
Try dry lube for all of ur exposed moving parts. It comes in a spray and it dries kind of like grease. WD-40 stays wet and turns dust and dirt into mud and gritty that can get in between ur moving parts and wear them out quicker.
Is that a red silk pla print used to cover the torque converter on the back and axel in the front haha. They're meant to be used and that's how you get better. Your wife rips. Get a computer duster off Amazon and print a tpu adapter for a tire hose. They're like 40 bucks and are way more powerful than canned air.
This episode is about a year old so 🤷♂️😅 things change, I have a air compressor. I’m not teaching anyone just sharing the adventures, and she’s great that’s for sure ☺️
Thank you kindly 😄 check out some the newer comp videos, you may enjoy them more 😅 th-cam.com/video/D5fsgXL5haU/w-d-xo.html Thanks for your time and have a great day!
Wd40 will work if you apply a fan to it and let sit over night with air blowning ovdr your rig wd40 with dry and looks beautiful try it you want be disappointed
i think i understand what your saying and yes ive learned a bunch sense this video, WD40 is water displacement so drying it overnight will help it from staying to moist and attracting and catching dirt and dust? is that the thought, i believe you would be right, currently im using chain saw grease spray as its a dry grease it doesn't have the same issues as a WD40, anyways i know some info ive shared has been wrong, it wasn't my intentions to teach people anything just to share what we were doing, it might impair or improve our RC time compared to another's, its just important to be to be upfront and honest even if im wrong, thanks for you time and for going out of your way to be helpful, have a fantastic day!
I'd agree, do not put wd40 in your portals. Or anywhere on, or in your truck. Perhaps fun times more than anxiety over a scratch. Maybe a bit more research on what you suggest prior to doing so
@@JT_JET to you too my friend! Ive tried many ideas, especially my own, that were terrible fails. We learn more as we go. Hope my comment was not offensive, did mean for it to be.
@@user-nk4ot4zh9o no worries, I get what you mean, I need to announce more of like I make these as sharing with friends and family and I have no idea what I’m doing until I do 😅. The GF and I are just so new and the hobby is expensive, but please watch a new video we have many new body’s and there’s a point where I let a kid drive my new truck, so don’t judge us to hard, I appreciate the point of view and understand putting out bad info, I really didn’t mean for it to be like that. Your time is important and you spent it here, thanks for the input and for watching, have a great night!
I tried to google a meaning for this, the best I found was it’s Indonesian meaning “solid” if this is so thank you, if I misunderstood your text and you were being kind I apologize, if your trolling me well then you got me 😅, thanks for watching and happy trucking!
Inside is liquid oxygen, if you flip the can upside down you can spray it onto people or animals causing a nasty sting and nerve damage. I used to put it inside a water bottle then put it in the sun and it would explode 🤪
![⭐ฮิตในTikTok!! ( มะมะมะหมูเด้ง MooDeng ) Ver. แดนซ์ ReMix BY [ ดีเจกิต รีมิกซ์ ]](http://i.ytimg.com/vi/4noyAoMa7bQ/mqdefault.jpg)
Nice slow crawls! Great layout! Liking the truck designs!
Happy trucking 😄
Damn that one turn before the tetter totter, everybody had to reverse to get around it. Nice track, great detail.
yeah not to many of us made that turn due to the gates making it tighter then your some were ready for, for sure a fun place to go, if your ever in the area they are open Monday through Friday, the Owner and all the staff are very kind and helpful and with the store if you break something crawling or racing you can just get a new one :D Thanks for being kind. have a great evening, Happy Trucking!
Awesome video .the close ups are the best of the trucks
Glad you enjoyed! i get the best shots i can get without being in the way of everyone, im no one special. thanks for watch'n and supporting
A boot mat from Walmart works great. I used a yoga mat to for a while. The boot mat is a hard plastic with sides and it helps contain stuff if you drop something. They are black but you can cut a yoga mat and put it in the bottom of the boot mat. Then you can see the black screws if you drop one.
heck yeah, thanks for sharing 😄great idea. happy trucking!
I found rubber ones at Menards and bough several. I use one of those as my work bench with a grid board sitting in the center of it
Nice looking indoor course.👍👍😁😁
It’s always a good time, Nate the manager just redid the waterfall and added a small pound with a bridge, there’s always more coming, hope you give more videos a chance, a lot of people coming together to make these events happen, I’m just a guy that enjoys editing a show as well :D happy trucking! Thanks for watching
I’ll let the person who made it know you liked it ☺️ thanks for such kind words
Hey JT Jet! I like that facility at Baker Hobby! The new owner is Awesome and open for anything there at Thunder Alley! You guys looked like you had fun and had pretty good runs! I use some small Star washers on those areas and holds great! I been using marine grease on my RC vehicles for over 15 years or more and I haven't had very many issues! Great video I'm out of Princeton Mn I'm running TRX 4 Blazer, Trailfinder II Toyota, Axial SCX 10 Jeep and alot of others 1/7 UDR's and 1/5 electric & gas🤔😉👍📹👋👋👋✔️💯
heck yeah thanks for the info, star washers on what areas? can you timestamp where you mean, i talk so much :D i cant remember from a month ago now. if not no worries :D i for sure gota get some of this dry grease or marine grease, look forward to seeing your rigs and showing off on the vids :D thanks for the kind words!
@@JT_JET Ya on the modified skidplate bumper on the back of the TRX 4 Sport I've placed them between the piece and the frame rail and holds really well or you could drill another hole on both side above in the skidplate and into the back crossbrace that holds the frame rails together all kinds of options!😉
I've used dry Graphite lube in tranny gears, but I only use Marine grease on axles and diff gears and housings all depends on what your running in?😉😂🤣😂
@@terrykuehn2686 oh I see what you mean I think, I don’t have material on it now but yeah I was thinking adding some material and making another hole, thanks again for the info!
This is a great video. Im on at 33:54
hell yeah, ill add that to the timestamps!
thanks for such a helpful comment and great event
You need a Bambu labs x1 carbon printer and a roll of nylon carbon Fibre, a bunch of cheap pla and tpu and poly carbonate. There's free upgrades all over the internet made by other enthusiasts for free. It's an expensive printer but it's cheaper in the US and has lidar so no failed prints. It's made by a bunch of former dji engineers and prints faster than 10 printers with the same quality. Buy cheap grey pla for cosmetics because you can sand and paint with rustoleum to look like metal. You can print a million gaskets with the tpu and save the expensive carbon Fibre for important GameDay spare parts. Great video.
I need a lot of things 😅😊
Try dry lube for all of ur exposed moving parts. It comes in a spray and it dries kind of like grease. WD-40 stays wet and turns dust and dirt into mud and gritty that can get in between ur moving parts and wear them out quicker.
Great info! Thanks :D
Is that a red silk pla print used to cover the torque converter on the back and axel in the front haha. They're meant to be used and that's how you get better. Your wife rips. Get a computer duster off Amazon and print a tpu adapter for a tire hose. They're like 40 bucks and are way more powerful than canned air.
This episode is about a year old so 🤷♂️😅 things change, I have a air compressor. I’m not teaching anyone just sharing the adventures, and she’s great that’s for sure ☺️
Great video… where is this located?
😆
nice nice
Thank you kindly 😄 check out some the newer comp videos, you may enjoy them more 😅 th-cam.com/video/D5fsgXL5haU/w-d-xo.html Thanks for your time and have a great day!
Is this the same place in Owatonna MN?
idk, google it. thats what i would have to do.
Wd40 will work if you apply a fan to it and let sit over night with air blowning ovdr your rig wd40 with dry and looks beautiful try it you want be disappointed
i think i understand what your saying and yes ive learned a bunch sense this video, WD40 is water displacement so drying it overnight will help it from staying to moist and attracting and catching dirt and dust? is that the thought, i believe you would be right, currently im using chain saw grease spray as its a dry grease it doesn't have the same issues as a WD40, anyways i know some info ive shared has been wrong, it wasn't my intentions to teach people anything just to share what we were doing, it might impair or improve our RC time compared to another's, its just important to be to be upfront and honest even if im wrong, thanks for you time and for going out of your way to be helpful, have a fantastic day!
Yes thats what I ment and you have a great day as well thanks
oh now i get it, i though you were talking about your irl bleu truck that was leaking fluid
Lmao god no thank god. Ugh just did 9 hours of negotiations
Can anyone tell me what wheels are on the blue truck at 17:10 run. i cant find white with a polished ring anywhere
no idea. but i agree those are nice :D
Where is that place?
Thunder road rc raceway, Baxter MN, the location is below the video tittle just click it :D happy trucking 👍
This is a great video
thank you! heres another you may enjoy :D th-cam.com/video/5o2J0Xj2RL0/w-d-xo.html
I'd agree, do not put wd40 in your portals. Or anywhere on, or in your truck. Perhaps fun times more than anxiety over a scratch. Maybe a bit more research on what you suggest prior to doing so
I understand where you’re coming from 😅, I hope you enjoyed something, happy trucking!
@@JT_JET to you too my friend! Ive tried many ideas, especially my own, that were terrible fails. We learn more as we go. Hope my comment was not offensive, did mean for it to be.
@@user-nk4ot4zh9o no worries, I get what you mean, I need to announce more of like I make these as sharing with friends and family and I have no idea what I’m doing until I do 😅. The GF and I are just so new and the hobby is expensive, but please watch a new video we have many new body’s and there’s a point where I let a kid drive my new truck, so don’t judge us to hard, I appreciate the point of view and understand putting out bad info, I really didn’t mean for it to be like that. Your time is important and you spent it here, thanks for the input and for watching, have a great night!
Manstab
I tried to google a meaning for this, the best I found was it’s Indonesian meaning “solid” if this is so thank you, if I misunderstood your text and you were being kind I apologize, if your trolling me well then you got me 😅, thanks for watching and happy trucking!
wait you need to be an adult to buy air cans? like wtf
Yeah cause you can huff them
Inside is liquid oxygen, if you flip the can upside down you can spray it onto people or animals causing a nasty sting and nerve damage. I used to put it inside a water bottle then put it in the sun and it would explode 🤪
@@docedits7294 lol what are you talking about, which part. please time stamp it, lol i cant remember everything i ramble about 😅
@@docedits7294 oh air duster, yeah its pretty crazy stuff. lol
@@JT_JET We are talking about canned air 😭😭