I'm going to have to disagree with you. If you put a fresh CO2 cartridge in the magazine you're going to have more damage with the steel balls especially if you're breaking glass. I do the same test, I'm 15 ft away and I'm using steel balls in my TPM1 which is almost a replica of the Glock it shoots the same way. And my steel balls from 15 ft away goes through cardboard box and 40 oz Colt 45 beer bottles. And then goes through the back end of the cardboard and that's 15 ft away. Something you're doing wrong is not using a fresh cartridge for each ammunition, the rubber balls will go through the cardboard but bounce off the bottles. I never shot aluminum, but the steel is where it's at, that's why they call them glass breakers. And if your barrel is accurate you can shoot 15 ft away with the steel balls especially if you give a headshot in self-defense you're going to stop that attack from coming to you. If one person is coming as a threat and you empty an entire bag of Steel balls at that person's face or head trust me the first one they're going to feel seven more coming right at them is going to put them down! Period.
I could be way off base here; but it has been my observance that all replica guns are more for esthetics that for functionality. When I purchased my HDR, T4E I could barely hold out, I couldn't wait to take it out to a rural area for some target practice. Well one more rainy weekend pushed me over the edge. I loaded it up, filled 2 or 3 cylinders with 'Riot Balls' I purchased at the Combat Sport store and after selecting an appropriate target (a canvas tote bag, filled with compostable PU bags) hug from a peg on a metal encased door. Entering into this dicey venture, I kept second guessing my choice and
Pt. II - and slowly squeezed. The noise was unbelievable, very loud. Secondly I didn't see much damage from the shot but upon closer looks I seen it went clear through both obstacles and hit the door, a glancing sideways bounce, denting the tin plating a good ¼ inch after the bags. And all this from a 7.5 joule pistol. Yes the whole package impressed me and led me to believe replica pistols are manufactured for looks. I apologize to all who have an alternative opinion and thank you for allowing me to express mine.
Hey, I just got my Walther PDP 0.43 Compact 4. However, when I tried the 0.43 Rubber Balls from Umarex, it started to jam a lot. I've changed the springs and used good CO2... but the same issue! When I tried the 0.43 Rubber-Steel Balls, it worked perfectly! So, what kind of rubber balls would you recommend that are suitable for the PDP Compact 4? Thank you for your guidance.
Whaahh gwan Dread appreciate your vids me and my son Judah just found you and been catching up But as a man That's had my DreaDs for 21 yrs now over half my life I gotta ask you idren is Rasta-Fish related to Reggae-Shark???.... 😂 BLESSINGS FROM AMERICA FAMILY KEEP YOUR FAITH IN THE MOST HIGH AND YOUR EYES ON OUR ENEMIES AND REMEMBER TO ENJOY THE LIFE HE GAVE US!!!!
is this air gun only effective from 10 centimeters? So what's the point? The caliber is so small that you can't put pepper in it because it's ineffective, and it's weak for firing rubber bullets this gun needs seroius tuning
Was this in Canada? And can you buy these in Canada, and are special license needed or do the fall under air gun/soft or archery guidelines? Thanks. I've never heard of theses before but very cool.
Thank you for the Video, i have the Glock 7 , TPM1 und das HK416 .... There are also blue rubber balls that are a little stronger than normal rubber balls
Do you the fps dropped each time you got the the chrome balls? I would think you need to shoot one round of each with fresh CO2 but easy for me to say... not my $$$ 2 questions, please... Do you prefer Glock over Walther, why? And did you mod the weapon in order to shoot the chrome balls or is it totally stock? Thanks for your time.
That's because the steel balls weights dubble as much and the barrel is too short for this ammo. You need an HDP 50 or HDR 50 with extended performance barrel to shot pure steel balls
Manque de Puissance, 5 joules ce n'est pas assez, c'est dommage car ce pistolet est réussi , Umarex devrait réfléchir sur une possibilité de pouvoir régler et augmenter la puissance et d'approcher les 39 Joules comme les FSC Pistol by Grimburg th-cam.com/video/fk8upctPWUI/w-d-xo.html
Hi Good idea 16,5J Version Strong Blow Back Full Metal Colt 1911 RAM 16,5 J Version Full Metal Strong Blow Back Browning HP RAM 16,5 J Strong Blow Back Full Metal Regards Artur Poland
![Best caliber 50 Ammunition - Ammo Comparison [HDR 50]](http://i.ytimg.com/vi/Eq2JPRlaDzI/mqdefault.jpg)
I got shot by T4E Glock 17: th-cam.com/video/eXWQo2U1Q5Y/w-d-xo.html
I'm going to have to disagree with you. If you put a fresh CO2 cartridge in the magazine you're going to have more damage with the steel balls especially if you're breaking glass. I do the same test, I'm 15 ft away and I'm using steel balls in my TPM1 which is almost a replica of the Glock it shoots the same way. And my steel balls from 15 ft away goes through cardboard box and 40 oz Colt 45 beer bottles. And then goes through the back end of the cardboard and that's 15 ft away. Something you're doing wrong is not using a fresh cartridge for each ammunition, the rubber balls will go through the cardboard but bounce off the bottles. I never shot aluminum, but the steel is where it's at, that's why they call them glass breakers. And if your barrel is accurate you can shoot 15 ft away with the steel balls especially if you give a headshot in self-defense you're going to stop that attack from coming to you. If one person is coming as a threat and you empty an entire bag of Steel balls at that person's face or head trust me the first one they're going to feel seven more coming right at them is going to put them down! Period.
They allow it because there's a guy that does it all the time with guns that are like 50 jewels
Enjoying your T4E Glock 17 videos. It's a fun plinking launcher.
Aluminium. Ffs.
I think the steel ball are much heavier so it take lot more force to drive it further than the rest
I could be way off base here; but it has been my observance that all replica guns are more for esthetics that for functionality. When I purchased my HDR, T4E I could barely hold out, I couldn't wait to take it out to a rural area for some target practice. Well one more rainy weekend pushed me over the edge. I loaded it up, filled 2 or 3 cylinders with 'Riot Balls' I purchased at the Combat Sport store and after selecting an appropriate target (a canvas tote bag, filled with compostable PU bags) hug from a peg on a metal encased door. Entering into this dicey venture, I kept second guessing my choice and
Pt. II - and slowly squeezed. The noise was unbelievable, very loud. Secondly I didn't see much damage from the shot but upon closer looks I seen it went clear through both obstacles and hit the door, a glancing sideways bounce, denting the tin plating a good ¼ inch after the bags. And all this from a 7.5 joule pistol. Yes the whole package impressed me and led me to believe replica pistols are manufactured for looks. I apologize to all who have an alternative opinion and thank you for allowing me to express mine.
Very specific. Thanks!!!
Thank you. Good work, and helpful in making buying decision.
Glad I could help 💪
A very informative video.
Thanks. I just got a chronograph which would've been a good addition to this... but I will do that in a future video 👍
Great info, thanks for sharing.
Amazing test 👍
Bro what type of grip is that hogue. Looks badass
Just the standard hogue grip for the Glock 17
That's huge ball bullets man😅
My bad bro i see the steel are 5 gr. And i finally found some. Keep up the good content 👍
Great video thanks
Glock should make a gun that uses two CO2‘s at once
16g would be aight too
Hey, I just got my Walther PDP 0.43 Compact 4. However, when I tried the 0.43 Rubber Balls from Umarex, it started to jam a lot. I've changed the springs and used good CO2... but the same issue! When I tried the 0.43 Rubber-Steel Balls, it worked perfectly! So, what kind of rubber balls would you recommend that are suitable for the PDP Compact 4? Thank you for your guidance.
Whaahh gwan Dread appreciate your vids me and my son Judah just found you and been catching up But as a man That's had my DreaDs for 21 yrs now over half my life I gotta ask you idren is Rasta-Fish related to Reggae-Shark???.... 😂
BLESSINGS FROM AMERICA FAMILY KEEP YOUR FAITH IN THE MOST HIGH AND YOUR EYES ON OUR ENEMIES AND REMEMBER TO ENJOY THE LIFE HE GAVE US!!!!
Can you get lightweight lead ones?
is this air gun only effective from 10 centimeters?
So what's the point?
The caliber is so small that you can't put pepper in it because it's ineffective, and it's weak for firing rubber bullets
this gun needs seroius tuning
Can you also use balls with a diameter of 11mm?
Was this in Canada? And can you buy these in Canada, and are special license needed or do the fall under air gun/soft or archery guidelines? Thanks. I've never heard of theses before but very cool.
You can buy them no problems, they don’t exceed the FPS to be considered a firearm
I just made a video about this as a defense weapon. I’m curious to know which one is better the steel infused rubber balls, or the aluminum balls?
None. They are still toys.
What can it do at 5 or 10 yards that would be 15ft and 30ft
It would be done af to use carbon fiber balls. Super light and durable!
How much SRP for the T4E Glock?
Thank you for the Video, i have the Glock 7 , TPM1 und das HK416 ....
There are also blue rubber balls that are a little stronger than normal rubber balls
I'm a security officer and I carry one
Hi,
can You tell me wich knife you are using?
Thx.
Jan
The brand is 'Wolfgangs' but don't know the model name anymore. 😕
Does it do paintballs? I just want to make a paint spattered mess.
@@notmeanttobe6940 Yes, it works with cal. 43 paintballs.
I just bought this, can you go live with me and show me how to use it??😊😊😊😊😊🙏
I shoot 2targets and the Rubber Ball comes back on my head this is Not a Airsoft Play toy
Do you the fps dropped each time you got the the chrome balls? I would think you need to shoot one round of each with fresh CO2 but easy for me to say... not my $$$
2 questions, please... Do you prefer Glock over Walther, why? And did you mod the weapon in order to shoot the chrome balls or is it totally stock? Thanks for your time.
That's because the steel balls weights dubble as much and the barrel is too short for this ammo. You need an HDP 50 or HDR 50 with extended performance barrel to shot pure steel balls
Why that gun so quiet, my ppq M2 gives off loud bang
It just doesn't sound as loud in the video. I also turned down the volume of some shots to make the video more pleasant to watch/hear.
Lead or tungsten balls?
Aluminium, steel and rubber
Manque de Puissance, 5 joules ce n'est pas assez, c'est dommage car ce pistolet est réussi , Umarex devrait réfléchir sur une possibilité de pouvoir régler et augmenter la puissance et d'approcher les 39 Joules comme les FSC Pistol by Grimburg th-cam.com/video/fk8upctPWUI/w-d-xo.html
Awesome
I feel like u should have shot at a distance at least 10feet or so
I prefer balls of Steel! Oops.......
Do you wanna buy another one for $120
Which gun
if this pistol was a 15 joule gun, not 4-5…
it is possible to make this pistol 15 joules?
Yes
Oh yeah!😁😌😌. I had also again surprising fun with co2 in my gas blow back pistol
Hi
Good idea 16,5J Version
Strong Blow Back
Full Metal
Colt 1911 RAM 16,5 J Version
Full Metal
Strong Blow Back
Browning HP RAM 16,5 J
Strong Blow Back
Full Metal
Regards
Artur
Poland
Детский сад