Hi, as much as the video shows that it can be done, I am not sure what the cone drill is for. is it possible to upload the full video of the process instead of pics?
I don't understand how a new sleeve for the sprint solve this issue, but I do have this problem. Is it because the original one has spun in the socket, is it simply the only way to access the motor and reset the teeth on the gear?
First you need to open the frame. After cleaning and lubricating the end position tip this kit is needed to be able to put the mirror frame back together again. Most mirror frames are rolled together from the factory, the only way to repair is to use this kit or you should think of a solution yourself how to assemble it. The problem is in this end lock stick,it oxidizes in the socket. You clean/lubricate and it works again.
Hello, you are right, you need to use a suitable size of a socket wrench or a piece of pipe both up and down. Compression is done by turning with bench vices. I also apologize for the late reply
Hi, yes the washers are a special size. Unfortunately, I do not sell the washers separately, sending it by post abroad will be more expensive for me than this piece is.
Hey man! Great video! I got somthing wrong with my mirror on w166 ML! The mirror do not fold in some times! I think something wrong with gears or motor! Did your repair kit works on w166 chassis? Thank you!
Hi, w166 fits this kit, first check that the wiring is OK, if the wiring is ok then probably the device motor itself olso may be faulty. The main problem when moving from the end position is the simple diagnosis. But if the mirror closes and opens barely, then you may also be dealing with the transfer of oxide and then you can probably clean and lubricate it. Then the set I offered is needed for assembly.
Hey man I reversered mine into a side wall and now I have the same promblem, do u think the lock is broke the the mirror is garbage or this should solve it?
You find it here ;) www.ebay.com/itm/Mercedes-c117-x156-w176-w204-x204-w212-c216-w221-w246-wing-mirror-repair-kit/254296622337?pageci=bc54f7e2-d283-4d95-97b2-e24d413b777f
Hello, the pipes are handmade, they cannot be purchased separately anywhere to ensure a good price. Washers ordered by special order in larger quantities. In addition, the price includes worldwide shipping. If it is expensive for you, you can go buy a new mirror frame, the price of which is +400eur. Or buy from demolition for ~100-200eur each.
Thanks a lot, mine had the same problem and had no idea how to solve it. You are a great person!
Hi, as much as the video shows that it can be done, I am not sure what the cone drill is for. is it possible to upload the full video of the process instead of pics?
Wo kann man dieses Reparatursatz bestellen?
Thanks you very much
Thanks a lot!
I don't understand how a new sleeve for the sprint solve this issue, but I do have this problem. Is it because the original one has spun in the socket, is it simply the only way to access the motor and reset the teeth on the gear?
First you need to open the frame. After cleaning and lubricating the end position tip this kit is needed to be able to put the mirror frame back together again. Most mirror frames are rolled together from the factory, the only way to repair is to use this kit or you should think of a solution yourself how to assemble it.
The problem is in this end lock stick,it oxidizes in the socket. You clean/lubricate and it works again.
How do you put the washer over the pipe? I guess you have to compress the spring simultaneously, right? Is there a special tool needed to do that?
Hello, you are right, you need to use a suitable size of a socket wrench or a piece of pipe both up and down. Compression is done by turning with bench vices.
I also apologize for the late reply
These are not standard size washers either. I can't find them with these sizes anywhere O_o. Can they be bought separately?
Hi, yes the washers are a special size. Unfortunately, I do not sell the washers separately, sending it by post abroad will be more expensive for me than this piece is.
Hi Erki i have 2011 GLK 350 what is the part number for side mirror and where i can puy the part for it
thanks
i sell them on ebay
www.ebay.com/itm/254296622337
Hey man! Great video! I got somthing wrong with my mirror on w166 ML! The mirror do not fold in some times! I think something wrong with gears or motor! Did your repair kit works on w166 chassis? Thank you!
Hi, w166 fits this kit, first check that the wiring is OK, if the wiring is ok then probably the device motor itself olso may be faulty. The main problem when moving from the end position is the simple diagnosis. But if the mirror closes and opens barely, then you may also be dealing with the transfer of oxide and then you can probably clean and lubricate it. Then the set I offered is needed for assembly.
Hey man I reversered mine into a side wall and now I have the same promblem, do u think the lock is broke the the mirror is garbage or this should solve it?
hello, probably something broken inside. It is more sensible to put a new frame.
@@miiduerki hey so I pushed the mirro back in place and restarted the car and now it works perfectly fine thanks
Hi.Any help with s class? My 1 is 2014.
Do u have a repair kit for that one?
If s 221 fl then it helps. Not suitable for s 222 mirrors.
Hi, I live in England, do you sell these repair kits..
hi i can send it to you in England. You can make the purchase through ebay, the link is attached below the video ;)
@@miiduerki great, thank you…I’ll take a look now.
@@miiduerki I have a 2012 W207 E class coupe, will this fit ok.
hi it fits w207
hello i have exactly the same problem how can i repair it myself and where can i find that part or buy thanks in advance
You find it here ;)
www.ebay.com/itm/Mercedes-c117-x156-w176-w204-x204-w212-c216-w221-w246-wing-mirror-repair-kit/254296622337?pageci=bc54f7e2-d283-4d95-97b2-e24d413b777f
Erki Miidu thank you very much🙏
Hi, I have this problem too, can you explain how it breaks, is there a proxy switch that stops working, it's not easy to see what the problem is
@@alanshort7253 There is a stopper rod with a spring. The rod oxidizes in the housing and no longer acts as a stop.I also apologize for the late reply
How you put the rings on the pipe?
Hi, I'm compressing it between the vises. I support with socket wrenches.
@@miiduerki i buy the kit and it works thanks👍🏻
Hi, does it work for w447 too?
Oh?
Hi, I think it might fit, but I'm not sure. If you took off the case and the glass, you could check if the pipe is the same size.
Were do I get the kit..
Hi, www.ebay.com/itm/254296622337?hash=item3b35428501:g:RTQAAOSw0Vxdk6l5
Do you really charge 60$ for this piece of metal and few washers ;)?
Hello, the pipes are handmade, they cannot be purchased separately anywhere to ensure a good price. Washers ordered by special order in larger quantities. In addition, the price includes worldwide shipping. If it is expensive for you, you can go buy a new mirror frame, the price of which is +400eur. Or buy from demolition for ~100-200eur each.
Sorry but that music is terrible.
I couldn’t put up with it to the end.
Hi i want to bye that repair kit and delivery to my country Bulgaria
Hi, www.ebay.com/itm/254296622337?hash=item3b35428501:g:RTQAAOSw0Vxdk6l5&amdata=enc%3AAQAHAAAA4Pgy1hr0phVOt%2F4WLMF%2B%2F9IppX%2F%2Boofbxc6fedbSchushRD%2BxqYNp6PLgcxpvHhwjpB%2Fus7leTDeC0hgtAEPIMumn%2FyC%2BxvFl%2Fqu4qdi0K6AcDcv%2FdTTIqO6IrDuefCElMLMuiN4qptKgc1nvTzkmMrNmNLSluDwZUI0tnptHwI7BOrNGjeC3IkFsf49qH7AOrvxGnarl9OOa5zvWYkhXV37O4kk%2BdAoU1CcYzDhuEV1FySKDfPVFnn%2B3emTwcntTHoyvsoJW5LJCTMdOwot0YYlyv1SpgO1pWP7DYTVyfSP%7Ctkp%3ABFBMsMKJm9xh