Sin tener el programa y sin saber ingles se entiende muy bien , solo un poquito mas despacito estaría bien :) igual es muy claro el tutorial, gracias, saludos.
Thank You! Thanks for the great video! Question how can we export SolidWorks creations to Blender or 3D Max without using STL which creates too many polygons? Is there any other solution so that there is no explosion of polygons in the export? Thank you Stéph. Merci superbe vidéo! Question comment peut on exporter des créations sous SolidWorks vers Blender ou 3D Max sans passer par le STL qui crées trop de polygones? Y a t-il d'autres solutions afin qu'il n'y ai pas d'explosion du nombre de polygones dans l'exportation? Merci bien Stéph.
During simulation...When adding pin, bolt or any other connectors... showing error....plzz enter value greater than or equal to 0 or less than and so on.....plzzz advise
Hi Can you make videos on how to mak acm panels and folding with groove I can’t find any useful information on how to setup acm in solid works or inventor
This was a very good tutorial on the major uses of different commands from within SolidWorks surfacing. He covered the major commands and the concepts of creating guide lines and how they work within lofting. The teacher gave enough information on why what he was doing and how he intended to approach the solution for the final drawing. So in my opinion not just a demonstration of technique, but also the teaching of such. Thanks.
Bonjour je vous suit depuis quelque temps sur vos tuto vidéo et actuellement celle-ci pas à pas mais comme je comprend pas votre langue j'aimerai connaitre le raccourci clavier pour faire une courbe à partir de la ligne à 6:04 merci d'avance pour votre aide.
I like the channel, but not sure about this being a good surface tutorial. Could have just as easily been done with solid features. This doesn’t highlight the power of surfacing very well.
You are right, it could have been done as a solid, but it would have been much harder since the front and back of the bottle are not flat, but curved outwards. I also think the intent of the video was to demonstrate the basic functions of surfacing.
Not sure what you mean by "it starts in the right plane instead of the front plane". Most of the time it does not matter what plane you start your threads from unless is is demanded by the person is receiving the drawing. I looked in your profile, but could not find an email address so I can not reply directly to you with pictures. If you still need help, look up my email address in my profile and write to me directly.
Does anyone know how to check in SolidWorks the volume of the liquid that would fill the bottle? And not the whole bottle, but to a point under the cap, like how it would be filled in real life.
You could just create a block surrounding it (deactivate merge entities when doing so), then subtract the bottle from it and delete the external part of the subtract. You will end up with a geometry that represents the volume of the liquid filling the bottle to the brim
Please return to time 0:29 of video ,press pause and make screenshot .Next save file and you will edited to use with exercise.I so do it .I use Irfan View to make screenshots.
![ผัวเถื่อน - ยูริ โตเกียวมิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/P08ORRVDGl8/mqdefault.jpg)
17:38 This is the moment when I said "¿Why didn't I think of that before?"
7:30
Jajaja 😹
You can also use the chamfer and fillet tools to do this as well, but this way works even for more complex thread cross-sections.
Absolutely YES! 🤣🤣🤣
can you make a tutorial on how to make a clutch, such as a spiral jaw clutch, centrifugal clutch, cone clutch and other clutches please
Any vacants for sollid works
Can you please make a video on electric motor engine design ??? Plss can u upload it as soon as possible ...
Highly requested..
Welcome back Sir. Hope everything is well. Thank you for sharing your knowledge. 👍
Sin tener el programa y sin saber ingles se entiende muy bien , solo un poquito mas despacito estaría bien :) igual es muy claro el tutorial, gracias, saludos.
Who is watching in 2024
Thank You! Thanks for the great video!
Question how can we export SolidWorks creations to Blender or 3D Max without using STL which creates too many polygons? Is there any other solution so that there is no explosion of polygons in the export? Thank you Stéph.
Merci superbe vidéo!
Question comment peut on exporter des créations sous SolidWorks vers Blender ou 3D Max sans passer par le STL qui crées trop de polygones? Y a t-il d'autres solutions afin qu'il n'y ai pas d'explosion du nombre de polygones dans l'exportation? Merci bien Stéph.
Thank for guidline, long time forget about this tools.
Excellent SOLIDWORKS Channel!
Solidworks của tôi trong Cut không có tùy chọn Scope, ai đó giúp tôi.!!!
STUCK permanently at the 3 point arc in the beginning cant align symmetry option to do so does NOT pop up
During simulation...When adding pin, bolt or any other connectors... showing error....plzz enter value greater than or equal to 0 or less than and so on.....plzzz advise
You could've done that with Solid tools bro! Why do you hassle so much using surfacing tools?
Thanks! wonderful SOLIDWORKS instructing videos! 😎
What can i do to become like youuu, proud of youuuuuuu. You make me feel this software's.
Sir pls hme ye bataiyr ki background ka cammand kaha se enabl kre pls jisme aaap white plane select krte h mere me show nhi ho rha pls sir....
Thank you very much sir 😊
Nivce video will be great to can possible download the file
Pening Gak eh dgn India ni buat, tam paham akum
Hi
Can you make videos on how to mak acm panels and folding with groove
I can’t find any useful information on how to setup acm in solid works or inventor
This was a very good tutorial on the major uses of different commands from within SolidWorks surfacing. He covered the major commands and the concepts of creating guide lines and how they work within lofting. The teacher gave enough information on why what he was doing and how he intended to approach the solution for the final drawing. So in my opinion not just a demonstration of technique, but also the teaching of such. Thanks.
Hello sir,
Can you make a tutorial on Configuration option briefly for beginners...
Thanks in advance.
Have you tried solidworks 2021 in windows 11 and is it working good?
Bonjour je vous suit depuis quelque temps sur vos tuto vidéo et actuellement celle-ci pas à pas mais comme je comprend pas votre langue j'aimerai connaitre le raccourci clavier pour faire une courbe à partir de la ligne à 6:04 merci d'avance pour votre aide.
Hello sir
Please provide pdf of soild excerice 96
can you make a tutorial hand grep mp 4
Sol poket roket bike design ka video banayi ye sir
Please provide pdf of soild excerice
Nice tutorial i like this
Fillet the Steak
Nice video, thanks :)
How to install cad in ubuntu os
Please make wood door design videos.
Make a Mazda Rotary 13B Engine!
thank you sir your video really helped me
Wow nice tutorial sir 👍👍
thank you
Thanks
Please draw a car using surface tool
Awesome
Sri i need software sri
Can you make a tutorial for GD & T
How much per a course ?
I like the channel, but not sure about this being a good surface tutorial. Could have just as easily been done with solid features. This doesn’t highlight the power of surfacing very well.
You are right, it could have been done as a solid, but it would have been much harder since the front and back of the bottle are not flat, but curved outwards. I also think the intent of the video was to demonstrate the basic functions of surfacing.
show
thx
Sir can you please tell me by profession who you are?
Maybe Mechanical engineer
The best videos 💯👌🏻
Thanx
Good video 👍
Díky!
I love it dude
Thanks for this
good job
very good design thanks for the video!!!
Great
Came out great, thank you!!
You have the best tutorials
Nice sir ❤️
well explained!
Can you help me fix this error: when I set the start angle of helix at 0 degree, it starts from front plane instead of right plane ?
You need definition a New plane with offset 0.1in and then make a new sketch with converted circle.
Not sure what you mean by "it starts in the right plane instead of the front plane". Most of the time it does not matter what plane you start your threads from unless is is demanded by the person is receiving the drawing. I looked in your profile, but could not find an email address so I can not reply directly to you with pictures. If you still need help, look up my email address in my profile and write to me directly.
Доступно и понятно
Does anyone know how to check in SolidWorks the volume of the liquid that would fill the bottle? And not the whole bottle, but to a point under the cap, like how it would be filled in real life.
You could just create a block surrounding it (deactivate merge entities when doing so), then subtract the bottle from it and delete the external part of the subtract. You will end up with a geometry that represents the volume of the liquid filling the bottle to the brim
Sir, can you please share a pdf for practice
Make a screenshots with drawing and print .Is a problem for you?
@@RonAdamsky dear I want practice set for exercise, if you have kindly share the same
Please return to time 0:29 of video ,press pause and make screenshot .Next save file and you will edited to use with exercise.I so do it .I use Irfan View to make screenshots.
@@RonAdamsky thanku bhai, maine ye design bana liya hai, I want more practice set. 500-600 design ho jisme