Radar Magnetron Replacement- JRC JMA 9122 6XA

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 ก.พ. 2025
  • Watch how to replace radar magnetron of JRC JMA 9122 6XA, also see how to reset transmitting time of radar magnetron after magnetron replacement, how to do radar magnetron replacement, radar magnetron test, radar magnetron replacement procedure, JRC radar magnetron replacement procedure, how to do radar transmitting magnetron of JRC, complete ship radar magnetron changing procedure. Also watch complete step by step safety related to X band radar magnetron changing procedure, S band radar magnetron replacement procedure, TX/RX transmitting time reset for X band & S band radar magnetron.
    Do follow my playlist for all electrical related videos: • Only Electrical
    Do watch my other videos:
    Reverse power trip testing of Aux Engine: • How to test REVERSE PO...
    Duties & Responsibilities of E.T.O || Job & role of Electro Technical Officer on ship: • Duties & Responsibilit...
    Inert gas plant Oxygen Analyzer calibration || zero & span calibration of oxygen senor-alfa laval:
    • Inert gas plant Oxygen...
    How to test main engine OVERSPEED alarm: • How to test Main Engin...
    Watch Direct online starter working video: • Direct online starter ...
    DOL Starter with Timer Sequence use || Direct online starter wiring with sequence TIMER use: • DOL Starter with Timer...
    Alarm Testing || Generator Engine Safety Test || Marine Engine Alarm & Trip Test: • AUX ENGINE Alarm Testi...
    BCU Marker Failure | Alfa Lubrication System | Pick Up Sensor change | Cylinder Liner Lubrication: • BCU Marker Failure | A...
    OPTIC TEST FAILED || Oil Mist Detector || Kidde GRAVINER oil mist detector routine: • OPTIC TEST FAILED || O...
    ENGINE CONTROL ROOM of Tanker Ship || Electrical Main Switchboard || ECR Complete Tour: • ENGINE CONTROL ROOM of...
    Ballast Water Treatment System | Sunrui Balclor BWTS | BWTS working & Operation: • Ballast Water Treatmen...
    Fire Alarm System fault Troubleshoot || Consilium Fire detection system on ship || Fire alarm faults: • Fire Alarm System faul...
    S & SYS (Samsung) PURIMAR Ballast Water Treatment System || PURIMAR S & SYS (SAMSUNG) BWTS Working: • S & SYS (Samsung) PURI...
    Cargo Control Room of Tanker Ship || CCR of oil tanker ship how it works: • Cargo Control Room of ...
    Omicron gas detection system working please watch this video: • Fixed Gas Detection Sy...
    Do like & subscribe my channel @sailorsrikantsingh
    #radar
    #magnetron
    #xbandradar
    #merchantnavy
    #sailorsrikantsingh

ความคิดเห็น • 8

  • @mat.5211
    @mat.5211 5 หลายเดือนก่อน +1

    Good job bro am already subscribed keep posting electrical stuff

    • @mat.5211
      @mat.5211 5 หลายเดือนก่อน

      But i did'nt saw you when you energize the scannner unit

    • @sailorsrikantsingh
      @sailorsrikantsingh  5 หลายเดือนก่อน

      Me and 2nd officer started the scanner unit together......imp point is to follow the procedure.

    • @sailorsrikantsingh
      @sailorsrikantsingh  5 หลายเดือนก่อน

      Thanku

  • @rahulbamania5648
    @rahulbamania5648 17 วันที่ผ่านมา

    I replaced the magnetron but it is not transmitting after warm up so I placed the old magnetron but again after warming up it is not transmitting, can you please advise me what could be the problem?

    • @sailorsrikantsingh
      @sailorsrikantsingh  11 วันที่ผ่านมา

      Check for the wiring and after warming up go with short band/range

  • @RajuK-e7u
    @RajuK-e7u 5 หลายเดือนก่อน +1

    I have completed my diploma in ELECTRICAL AND ELECTRONIC ENGINEERING
    I can join in merchant navy

    • @sailorsrikantsingh
      @sailorsrikantsingh  5 หลายเดือนก่อน +1

      You need to complete graduation, best option is to call collages like anglo eastern and t s rehman and clear all doubt.