How to convert k969 to rwd drift car stage-1(저렴하고 쉽게 k969 를 rwd 드리프트카로 개조하기)
ฝัง
- เผยแพร่เมื่อ 24 ก.ย. 2024
- I will show you how to convert the k969 chassis into an rwd drift car with a simple task.
There is no need for CNC machining, but 3D printing is required.
You can download 3d and pdf(jpg) files from thingiverse.
K969 RWD 3d files link : www.thingivers...
Stage-1 is a concept that uses many parts of the k969 chassis at low cost.
In Stage 2, I will use universal transmitter and equipment and adjustable camber. Of course, there is no need for CNC machining.
Check out WLtoys 1/28 k969(k989) convert to rwd drift car-1(WL토이즈 1/28 RWD드리프트카 만들기) : • WLtoys 1/28 k969(k989)...
M2 Ball end : ko.aliexpress....
AFRC GYS-2 V3 : ko.aliexpress....
간단한 작업으로 k969새시를 rwd드리프트카로 개조하는 방법을 공개합니다.
단, cnc머시닝등의 작업은 필요 없으나 3d 프린트 출력이 필요합니다.
3d파일을 원하시는 분은 메일주소를 댓글에 달아주시면 보내드리겠습니다.
스테이지- 1 과정에서는 k969 새시의 부품을 최대한 사용하여 저비용으로 제작하는 컨셉입니다
다음에 다룰 스테이지 2에서는 법용 송수신기와 장비를 활용하고 캠버각을 조절할 수 있도록 하겠습니다. 물론 cnc머시닝은 필요 없습니다.
![WLtoys K969 [Modified] Shakedown | FOW+CS Mod | DS Racing LF-5 Impressions](http://i.ytimg.com/vi/s_r2uF2up_w/mqdefault.jpg)
![WLtoys K969 [Modified] Shakedown | FOW+CS Mod | DS Racing LF-5 Impressions](/img/tr.png)
Check out WLtoys 1/28 k969(k989) convert to rwd drift car-2(WL토이즈 1/28 RWD드리프트카 만들기) : th-cam.com/video/LYmGF043STY/w-d-xo.html
Thats a trippy intro! Nice work tough 👍🏼
Thank you.🤗
Hey, keep up with these vids amazing work!! I really need the 3D file so I can make my car work properly 👍🏻
Thanks a lot . 🤗
Да, нужны 3D модели , многоуважаемый автор поделись моделями для печати на 3D принтере.
The music is fantastic! What you did here is also fantastic!
Thank you.🤗
영상 잘봤습니다 금손이시군요 ㅎㅎ 통으로 구매하고 싶을정도로 잘 만드셨네요!
중국산이 한국산으로.. 대박 입니다..
감사합니다.🤗
Hi, thanks for this tutorial, it looks brilliant. I have one small question tho:
Did you lock rear differential or not?
Sorry for late reply. I locked dif. Thank you.
실력이 후덜덜 하십니다 👍😍👍 짱이에요
감사합니다^^.
참 쉽죠? 😂 밥 로스 선생님 생각이 나네요
Hey mate, I ordered a k969 just based on this video! I too want the 3d file now! Thanks in advance! Keep up these projects! Regards
K969 RWD 3d files link : www.thingiverse.com/thing:5581144
I just seen noe on ali express there's a front end for this car to convert to rwd & a big steering angle for £11
아직 구독자가 4백명대인게 신기... 혹시 취미용CNC같은거 사용하시는 거면 그거 강좌 하셔도 많이들 들어 올 것 같네요.
칭찬 감사드립니다. cnc관련 컨텐츠는 추후에 고려하고 있습니다.
感謝您！非常精采的工作，我需要3D文件，我希望我能製作出像你一樣酷的車子
You can everybody can there is no magic behind it.
Hey zeus wich material should i use for 3d printing and wich pressicion
Thx to you,this is motivate me so much,and very useful video that you have made,cheerrrs🍺🍺🤘
Thanks a lot.🤗🤗
Hi Zeus, I tried to mod my Wltoys 1/28 k989 with your video instruction but it does not drift properly. Does the RWD conversion works only for WLTOYS K969? Thank you
아주좋은알시 카같습니다.
감사합니다.😄
FYI the file for the 3D printed part is on Thingiverse
뒤늦게 zeus garage님 영상을 접하고 k969 주문을 했습니다. 저도 드리프트 차량 만들기 도전하려고 합니다.
3D프린터 파일 부탁 드리겠습니다.
아래에 올라와있는 파일 링크를 글을 쓰고 봤네요 다운 받아서 잘 만들어보겠습니다.
I've messaged on Facebook for the 3d file :)
I sent a reply. Thank you.🤗
มีชุดหน้าแปลงเสร็จแล้วมั้ยครับ
El diferencial trasero mejor bloqueado o con movimiento?
Hello! Can you give me the parameters of that T shape! Thank you
So all the parts are stock from the world toys minus that printed arm? Like don’t understand what parts are what
Добрый день.
Твои 3d модели для модификации рулевого управления находятся в открытом доступе?
Hello zues! I like the build, is there any chance I can get the 3D file?
Leave email addresss on my facebook(link is on this channel home).
@@zeusgarage4368 Thanks! Anyway I already reach out to you on facebokk.
Hey Zeus the Atomic amr 2wd would be also a good pick right?Or the should i do the k969 modifie run.Whats better in the end ?i thought of getting the Atomic amr 2wd with esc and the k969 so i can do both.
Installing gyro doesn't requires new reciever and transmitter with 3 channel?
Hello, I am interested in the 3D printed steering part. I can print it myself, just need the form. Thank you very much.
Да, да да❤
I try to do it but with alloy cups and i cant get full lock steering, and i have to set to much toe out to achieve more lock ... i dont know what i have done wrong 😢
Sorry for late reply. Use stock parts. Alloy parts are not good for rwd conversion. Thank you.
Wow! This is fantastic. For this stage of the build you used the WLToys transmitter and receiver? The gyro can be connected to the OEM electronics? Or did I miss something. I have absolutely no experience with WLToys.
Yes I used stock WLToys transmitter and receiver. Refer another example : K969 wheelbase adjustable AWD drift car-3(k969 가변휠베이스 awd 드리프트카-3) - th-cam.com/video/PbZU5W7D0oo/w-d-xo.html
You can connect gyro in any servo no joke, the mini D12 only 1s battery is enough to run a gyro.
Hello Zeus, very good information video. I'm interested in having your 3D file. Is it possible? thanks in advance for your reply
hi Zeus,,,If may ask, What is the size specification of the bearings that you use in video clip 8:40 for the Rod? and also the screw size spec that you use in video clip 8:05?
I hope you help me on this.
thank you a lot!
You can see more details by setting the subtitles at the bottom right to English. Thank you.☺
Nice job. I like this conversion with the servo remaining in the same location. Could you please send me the file?
Leave email address. I'll send.
@@zeusgarage4368 Would like to get this as well. Email posted on another video. great work man.
@@Bluespade115 Hard to find because there are so many replies in my channel. Please leave again.
Just subbed! Cant wait to get this thing to RWD! How do I get the 3d print file?
Leave email addresss on my facebook(link is on this channel home).
Hello, Zeus. I can’t find AFRC GYS-2 v3 on AliExpress, there is only v4. What's the difference between V3 or V4??? 😢
👌
請問我如何才可以得到那顆轉向的零件?是否能向你購買?我有一台K989 也想改成和你影片一樣 學習改造
Nice video mate!
Thank you.
@@zeusgarage4368 I will probably doing the same for the front, I already printed the front monoshock arm and cutted the axle
Are they Ali drift tires?
@@jeromedupont8994 Yes. Round shape tires.
@@zeusgarage4368TY
Hi! Are the screws from the stock car or do we need to buy some more? And what are all the tools you are using like drills and other stuff?
necessary tools : file, 1.5mm drill, 2mm drill, cutter nife, nipper, ...
necessary parts : 2mm bolt(lower arm shaft, steering post, linkage), ballends, gyro.
@@zeusgarage4368hi, I know this is old and I don’t know if you will reply, but did you also purchase bearings for the 3D printed part or did they come from somewhere else?
ส่งรถไปทําได้ป่าวคัพ
@ก้าวแรก แห่งทางนํา
The Rear diff os verter block ir like a stock diff? Thank You
Hey could I get the steering file?
Yes. I sent files.🤗
Great video bro can I have the 3d Print files of this project?
🤙 rad
Hey mate can I grab the file for the steering part this is wicked u have done a sick job !
請問後驅需要裝置差速器嗎？
Zeus, this is at least my tenth time watching your conversion. Can you please send me your STL files for the K989? I'm looking to go as extreme as you have. I sent you a message on Facebook. Thanks!
What is the size of the linkage?? Is that m2??and the ball diameter itself??
M2 Ball end link : ko.aliexpress.com/item/32620209760.html?spm=a2g0s.9042311.0.0.27424c4dCBogD1
자이로가 뭐예요? 원래 모델은 없는 거예요?
SENT YA A MSG ON FACEBOOK FOR THE LINK TO THE STEERING RACK! GREAT VID AND MOD MAN!!
Could you send me the 3d file please?
Can I get the link for the gyro ? And do I need anything to do to the rc before putting gyro ?
AFRC GYS-2 V3 : ko.aliexpress.com/item/1005001286720337.html?spm=a2g0s.9042311.0.0.27424c4duA5ocV
You can easily set up by following the manual included with the gyro.
Can I buy the steering part from you. A couple perhaps. I don’t have a 3D printer. Thanks.
Sorry. I can't sell because I'm at work right now.
홀가공은 드릴로 하나요?
네. 드릴로 가공합니다.🤗
Check out Tamiya TT02 RWD conversion with 3d printer : th-cam.com/video/QUsKKTEY4Us/w-d-xo.html
What steering rods and ball ends did you use?
I added ball ends link above. And I used cut 2mm bolt.
the diff is one way?
No. It's stock.
Can I buy the steering part I 3d printed one but it does not come out good so I’m wondering if I can buy a cnc one made from you please 😁
Hi, do you mind sending me the file as i cant seem to contact him through FB. chiong@rocketmail.com Thanks alot
Dose it for sale?
can i buy the 3d part some whara
1. 더 싼 만원대의 자이로를 쓰면 어떤가요?
2. AFRC GYS-2 V3처럼 고급 자이로가 가지는 장점은 뭐일까요?
만원대 자이로는 써보질 못해서 말씀드리기 어렵습니다만 수신기 내장형 자이로를 써보다가 성능이 안되어 afrc자이로를 구입하였습니다. afrc가 고급제품은 아니고 중급이라고 보시면 됩니다. 가성비 측면에서 좋은 것 같습니다.
Terbaik bossku
Terima kasih.
eh orang malaysia ke
Saya malaysia.. Zeus garage ni korea..
@@zeusgarage4368 apa bisa dipesan?
@@muhammadalim5659Sorry. It's just hobby.
Hi Zeus! Can you give me dimensions of the 3D printed part? Holes distance? I don't have a 3d printer I would like to make something like that. Thank you.
Leave email addresss on my facebook.
Pls sell a conversion kit on ebay.
I'm sorry. There are no conditions to sell.
Could you mind telling me about the infomation of the balllink?
Internet link is above. And I sent a reply with file.
@@zeusgarage4368 thank you
what do the best drifters drive,rw or aw drive?
Rwd drift speed is low than awd. I think rwd is easy to drift.😄
@@zeusgarage4368 everyone says awd for drifting ?
@@redleaderone8429 Actually RWD is better for professional looking drift. For a better counter steering. But comparing to RWD, AWD is more speed , but you cant counter steering AWD's well, but they both are fun !
hello zeus, could you show me how you connect your gyro to the wltoy receiver, i modified my k989 with your tutorial but impossible to drift without a gyro, i ride on a very slippery surface .thank you very much
mon mail : henry.magnat@laposte.net
@@henrymagnat3192If you are using a v3 gyro like me, connect it according to the manual. I sent a reply.🤗
@@zeusgarage4368 thank you so much
I have the dame problem i cant drift and i do it like the vídeo , i cant control the drift
Pls send link for 3d printed servo arm
eave email addresss on my facebook(link is on this channel home.).
Nice work...
I want to ask something...im just change my k989 to rwd spec..the problem is my car cannot go straight...when i try to go straight the car will spinning...can u help? I dont know which part i was missing..
All four wheels should have an equal force of gravity. Then you need to soften the suspension. See the first part (k969 fix & preparation)of this video.
@@zeusgarage4368 equal force of gravity means what? Btw thanks for you opinion...i will try and get to you back...thanks master
I have the same problem went to rwd and my car is underivable as soon as i give the car power the car starts spinning can not drive it around
@@tikkizs9817 You need to soften the suspension and gyro direction.
궁금증
1. 볼엔드와 볼엔드을 이어주는 나사가 m2인가요? 제가 구매한 m2는 연결이 안되네요...
2. 나사머리를 뭘로 자를수있나요?
1. 네 m2 볼트를 잘라서 연결합니다. 영상처럼 1.7미리 드릴로 충분한 깊이까지 구멍을 내주어야 합니다.
2. 니퍼로 쉽게 자를 수 있습니다.
@@zeusgarage4368 볼트 구매주소 알수 았을까요??
@@제휘성-u6t 여기서 구입할 수 있습니다. www.eshopshemeks.com/?NaPm=ct%3Dko5o1tuw%7Cci%3D0Jvm001Ld8Puysk%2Ddfli%7Ctr%3Dsa%7Chk%3Df1c3fefbc4179421720c8d02c8df89797b744a68
Do you have the steering file still.
Yes. Leave email address.
Can you adjust gyro gain with the stock receiver?
Sorry for late reply. Yes gyro gain is adjustable with stock receiver. It can be possible with small minus driver.
apakah bisa saya ingin order dari anda???
Can you tell me the length of the steering horn and the ball distance apart please?
I used stock servo horn without mod and rod length is 11.5mm. Refer above video.😄
Not the servo horn. The steering arm.
The 3d printed part.
@@zeusgarage4368 the part at 13:35 in your video.
@@goingcrazy00 Sorry for late reply. Length(bearing~balls) is 22.5mm, and ball distance is 12mm.
Hi, i can get the infomation of steering part? Thanks so much
Leave email address here. I'll send files. Thank you.😄
@@zeusgarage4368 can I buy a couple of your steering adapters? I don’t own a 3D printer. Thanks. Great video.
Great vid! Keep up the good work :) Can you send me the 3D file?
Leave eamil address here or my facebook(homepage).🤗
very good tutorial can you send 3d print file
Leave email address here. I'll send. Thank you.😄
타이어는 어떡해 센딩하셨나요?
선반에 물려서 했습니다.
That nice work!!
If I want for 3d file, can you give to me please?
Greta job! Can you send me the files for the stl?
Leave email addresss on my facebook(link is on this channel home).
볼엔드 국내에서는 못구할가요?ㅠㅠㅠ
저는 위의 링크 걸어놓은 알리에서 구매했습니다. 국내에서 찾아보면 비슷한 것은 있을 수도 있을 겁니다.
Do you still send the STL file?
Leave email address here. I 'll send
Can you please make a thumbnails with less details? You putting a name of videos in thumbnails even if you wrote it in title.If thumbnails have so much details, they become boring and people don't want to click on video cause that.So, please just put a picture on thumbnail, write 3-4 words and that is enough.Corean name of video put in title, not on thumbnails.Thanks if you understand👍❤️🥰🇲🇪
could you please share the cad file?
Yes of course.Leave email address.
What use rx tx and gyro
Tx & rx are genuine k969. Gyro is " AFRC GYS-2 V3 ".
Do you have stl file
Yes. Leave email address.
@@zeusgarage4368 acmiel30@gmail.com
@@acmiel1107 I sent a reply.
can you please send me the link for files?
Leave email addresss on my facebook(link is on this channel home.).
you forgot to send me the file
초딩 도 할수있는 정도의 게조는 없나요?
죄송합니다. 아직은 없는 것 같습니다.
Como consigo las medidas de la pieza 3d?
Leave email addresss on my facebook(link is on this channel home.)
afrc자이로에 불이 깜빡이는것이 정상인가요?
깜박이지 않고 빨간색 불이 계속 켜져있는 상태가 일반 주행 모드입니다.
@@zeusgarage4368 전 왜 깜빡일까요?ㅠㅠ
깜박이는 속도와 횟수 불 색상에 따라 경우가 매우 다양합니다. 설명서에 자세히 나와있으니 꼼곰이 보고 세팅해야 합니다.
can you give me the floor plan in 3d
Leave email addresss on my facebook(link is on this channel home).
@@zeusgarage4368 I have a message on facebook
What bearing do I need?
2 bearings with an inner diameter of 2mm, an outer diameter of 5mm, and a thickness of 2.5mm.
@@zeusgarage4368 thank you very much!
Hola podrías pasarme el archivo stl del steering? Gracias
Thank you. Leave eamil address here or my facebook(homepage).🤗
Thanks for the tutorial. Can you send me the 3D print file. Thanks!!
Thanks. I sent a reply.
That was fast reply. Received the info! Thanks.
can you send me the file?
hi man i need the 3d file stp
Leave email addresss on my facebook(link is on this channel home).
Muy buenos videos!!
Podrías mandarme los archivos 3d?
Leave email address here or my facebook.
@@zeusgarage4368 muchas gracias!!!
And don't ask people to put a email address in reply.Email address is private thing and only idiots will put it in comments
can send 3d file？
Leave email addresss on my facebook(link is on this channel home.).
I definitely want to try this! Can I get the 3D file? I've messaged you on facebook!
Download ink is here th-cam.com/video/paroY_CqxqQ/w-d-xo.html