I just finished setting up my machine today and knew I needed to run a cleaning mode first but wasn’t able to grasp the manual instructions and couldn’t find anything when I googled it. This was right on time and definitely helped me out! My first drink was a rum breeze and it is delicious! Thank you, cheers!
I clean mine once a month by running the cleaning cycle 2-3 times. In addition, I clean the straws in a sink of dishwater using the included pipe cleaner. I also pop out the pod holder and the bottom plates the drink glass sits on and wash them in the dishwasher.
Thanks for sharing the video. Regarding the pod drawer, the measurements stated it was about 13 inches wide. The black and decker cocktail is about 16 inches wide, does it hang over the drawer? Yours seem to fit perfectly
Mine does not hang over the drawer, the cocktail maker's footprint is about a quarter inch shy on each side of touching the drawers sides. I did measure and the drawer is a little over 13 inches, maybe you have a different version of the cocktail maker than I do.
@@YesterdayMeetsToday I ended up unplugging it for a bit then tried to clean it again, and it worked. So now I can use my barista perfectly again. Thank you!!!
Not sure why they are busted. I have had issues with putting a pod in and it does not read the barcode. My fix for this scenario is to use a paper towel to clean off the barcode reader and try again. Hope this helps!
I just finished setting up my machine today and knew I needed to run a cleaning mode first but wasn’t able to grasp the manual instructions and couldn’t find anything when I googled it. This was right on time and definitely helped me out! My first drink was a rum breeze and it is delicious! Thank you, cheers!
Thanks for the comment and glad it helped! Cheers!
Wow thanks this is the only thing I didn’t know how to get done… You’re awesome for this Thanks..Cheers❤❤
Glad it helped! Cheers!
Thanks for the Visual...
Your Welcome!
Very helpful. Thank you!
Glad it was helpful!
Thank you for a great video.
Glad you liked it!
I clean mine once a month by running the cleaning cycle 2-3 times. In addition, I clean the straws in a sink of dishwater using the included pipe cleaner. I also pop out the pod holder and the bottom plates the drink glass sits on and wash them in the dishwasher.
Great tip!
Thanks for the video short and to the point!!
Glad it was helpful!
Thanks for sharing the video. Regarding the pod drawer, the measurements stated it was about 13 inches wide. The black and decker cocktail is about 16 inches wide, does it hang over the drawer? Yours seem to fit perfectly
Mine does not hang over the drawer, the cocktail maker's footprint is about a quarter inch shy on each side of touching the drawers sides. I did measure and the drawer is a little over 13 inches, maybe you have a different version of the cocktail maker than I do.
Great video ty 😊
Thanks for watching
Thanks!
Your welcome!
Im trying to do cleaning mode but the lines keep lighting up.. they're all in perfect positions, like yours.. idk whats wrong
Not sure what is going wrong, can you explain in more detail?
@@YesterdayMeetsToday I ended up unplugging it for a bit then tried to clean it again, and it worked. So now I can use my barista perfectly again. Thank you!!!
@@laurabrown4215 Awesome! Cheers!
Are you suppose to take black capsule out as well?
Not sure what you mean by black capsule, can you be a little more specific? Thanks
@@YesterdayMeetsToday where you place the capsule, that piece pops out to clean.. figured it out .. thanks 😊
Mine started to be faulty, only cleans 1st one stop and nothing only 2nd flashes but no cleaning after that.
Humm, I have not had that experience but need to clean mine again so I will update if I run into the same issue
Thanks. And I filed a warranty claim since it was right under the 2yr warranty so they sent a new one . Haven’t install yet though.
I did everything you said, and water would not draw up for cleaning or come out like it did in the video
You should be able to hear it, check you are pressing the correct button on back of the machine
I use hot water in my cleaning process and i run it at least 5 times to be sure. That pod holder pops out also
Very helpful, thanks for the feedback.
I do that cleaning, including the straws, once a month. I clean the trays and pod holder once a week because they get sticky.
That's the same routine I have. Thanks for watching!
Good to know. Mine is attracting ants. I may have to clean it all the time.
Oh no! I have not had an ant issue
Why is my pods busted
Not sure why they are busted. I have had issues with putting a pod in and it does not read the barcode. My fix for this scenario is to use a paper towel to clean off the barcode reader and try again. Hope this helps!
P r o m o s m 😭