In general, would it be better to use a sealant when making holes to make. Water tight seal to prevent water getting in the ski? Thanks. I’m learning a lot from these videos.
where the holes were drilled its in a spot that has no risk of water getting into the ski. there were no holes made in the hull but on the outside trim
Nice job! Excellent video and just what I was looking for to install my new bumpers on my GTi. Liked the idea of using the blocker to prevent drilling into the other side of he fiberglass. Thank you!
Another good video. My wife and I watch your videos since were in NY and our GTI 170s are away for the winter. I know you just put them on but have you used them at a dock yet? What are your thoughts on how they perform in rough conditions? Thank you for any info you can give. And keep the videos coming!!
Thank you for supporting the channel. 🙏🏼 I have been using these over 5 years now. I think they do a great job for non rough water dock conditions. I have used them a couple of times while the water around particular docks were rough and have seen them fall off which of course the ski got scratched. I now just try to avoid docks that have rough water around them all together bc you would need huge multiple bumpers to protect your ski anyways.
Does the screw go into the body that the rubber strip is sitting on? My bolts are longer than the thickness of the rubber and will penetrate what the rubber is sitting on. 2024 Seadoo GTX Limited
Great video, thanks a ton for all of the content. I installed the fenders on a 21 gti se and took it out for the first time 2 weeks ago. I noticed splashing to the point of soaking the third seat when I would go around 15-20 mph. The water was hitting the back bumper bracket just right. Do you have any splashing? Thanks!!
Nice Video 😎 I’ve got the new 2021 GTR & just purchased the Fenders & Kit. But I purchased the 295100729 snap in kit. They appear to fit pretty similar. It says in they fit 2019 and up.
@@AlveanAzurin yeah I’ve seen the 3 hole mount. But My dealer sold me the other two hole mount. The ones you used are the new 2021 style mount by the looks. 😎
@@AlveanAzurin well I never got the GTX230, too many delays so I ended up getting a RXTX300 instead because they had one available. Still with the fenders. Love them. Easy to put on & protects the ski 👍
I have a bilge installed in my GTX300 and Trixx but haven’t had any issues. It is a nice back up to have for your piece of mind. I may install one in the RXP but would like to put the drain where I can see it when riding.
I installed mine today on my RxtX and my screws don’t stick through like yours. I don’t think you installed them high enough or the positioning on mine is different.
Hi Alvean, I had the dealer install on my rxp300 but when I ride I am constantly getting splashed on whether I ride by myself or with a passenger. When the water hits the install kit it creates a constant wave
The cheap ass piece of plastic used as the retaining post (built into the foam fenders) is awful, breaks very easily, I regret getting these. Waiting for somebody to come up with a good way to replace them with something metal from a hardware store. Did you have the same experience?
No, I haven’t had that happen to any of mine. But then again I hardly ever dock anywhere that’s rough waters. If I have to dock at a rough dock, I look for a spot where I can hook up dock lines at a angle to keep my ski floating away from the dock.
@@AlveanAzurin good call, I will probably do the same, unfortunately it was my 14-year-old son who was a bit rough taking it off and he snapped it down at Matagorda Harbor :(
These things are poorly made. I installed them on both my 2021 gtx 300 limiteds. They easily get knocked off the ski while docked, then you gotta go get it before it floats away. Huge waste of money. The plastic brackets cause additional drag when you’re moving. I’m gonna replace the rub rails, then throw these darn things in the garbage 😡
Don’t throw them in the garbage! Mail them to me if you truly don’t like them. I will pay for shipping.😂.. They are really not meant for any docks with high traffic and rough. My friend and I recently did a little modification to them adding a leash/tether to them which makes them securely stay on. I just use them in Bimini Bahamas having to leave my ski in the water over several nights and they stayed on with no worries.
@@AlveanAzurin they’re too expensive for the amount of goofing around that needs to be done, in order to get them to stay on. I ordered some Velcro cinch straps to help secure them down. I’ll share my results when they arrive.
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.4 (4/4)](http://i.ytimg.com/vi/d3l5rxl5CVo/mqdefault.jpg)
A very thorough “how to” video. All your videos have me anxious for spring when I can get my sea-doo out of winter storage.
Thank you. It’s warm now!!
thanks, I just purchased a 300RXT Sea Doo 2021, the dealer wanted 500 to install. With your help Im doing it.
Girl you’re pretty handy! 👍🏻
Thank you. I like to try to do things myself and learn things. 😁
i hope u rember me and just remember i was here from day one and remember me when your even more famous
😂🤦♀️.... of course! thank you for being one of the OG Supporters of the channel 😁
@@AlveanAzurin why u do the emoji i was in the destin one i told u i saw u and i told u to go to canyon lake
Great guide. Thank you for this video. Very good information on how not to mess up and actually showed how they snap in.
Thank you 🙏🏼. More videos to come.
Great video; thank you - no waffle, just useful facts and showing every step/tip.
Wow, thank you! I was actually looking for this on my new rxpx as well!! Dealer wasn't sure actually.
Perfect! Glad the video was helpful to you. Shame on the dealer.
Nice tip with the protection cardboard and tape.
I’m completely amaze by your knowledge about tools and installing things.. Your father should be proud.. lol
Lol... I like to learn things as much as I can. Thank you 😊
In general, would it be better to use a sealant when making holes to make. Water tight seal to prevent water getting in the ski? Thanks. I’m learning a lot from these videos.
where the holes were drilled its in a spot that has no risk of water getting into the ski. there were no holes made in the hull but on the outside trim
Nice job! Excellent video and just what I was looking for to install my new bumpers on my GTi. Liked the idea of using the blocker to prevent drilling into the other side of he fiberglass. Thank you!
Thank you. Glad you found the video useful. 😁
Would love to see some more videos!
Great video linked to the installation of the snap-in fenders
Thanks for the insights Alvean!
Thank you 🙏🏼
I just bought a 21 GTR230 so this helps tremendously! Thanks
Your welcome! 🤘
Love these fenders!! Great video
Yes! It keeps my skis looking fresh!
Another good video. My wife and I watch your videos since were in NY and our GTI 170s are away for the winter. I know you just put them on but have you used them at a dock yet? What are your thoughts on how they perform in rough conditions? Thank you for any info you can give. And keep the videos coming!!
Thank you for supporting the channel. 🙏🏼
I have been using these over 5 years now. I think they do a great job for non rough water dock conditions. I have used them a couple of times while the water around particular docks were rough and have seen them fall off which of course the ski got scratched. I now just try to avoid docks that have rough water around them all together bc you would need huge multiple bumpers to protect your ski anyways.
@@AlveanAzurin Thank you that was helpful information
Why didn't you use the T1 center drill as suggested by BRP? I don't have one so I would prefer to skip that step if advisable.
Thank you! Great instructions and advice.
Damn you a pro girl! Looking forward to more videos. 🤙
No pro but thank you 🙏🏼
If only one kit better on the left for refueling 👍
Pretty simple, Thank you 😊
Does the screw go into the body that the rubber strip is sitting on? My bolts are longer than the thickness of the rubber and will penetrate what the rubber is sitting on. 2024 Seadoo GTX Limited
Great video! I'm installing mine today...
Good 2 know, thanks.
You’re welcome!
Great video, nice tips. Thanks! 😎
This was a great vid. Thank you
Thank you 🙏🏼
Great video and thank you! Do you know if I can install a 3rd one in between the 2. I do have a stereo. Will I jeopardize going through the wires? ty
Very good job
I think I saw some scratches on the fiber glass.
Did you install the bilge pump? Love to see a video on the bilge install for the RXP.
Same
Not yet but I think I will.
Great review!!! Keep them coming!!! ❤️❤️
Thank you ☺️
Very informative thank you
Like a BOSS, Great Job:)
I just bought these but sending them back. I’m not trying to drill no holes in the gtx 300 limited. Should of watched first.
Great Vid. Thanks!
Great video, thanks a ton for all of the content. I installed the fenders on a 21 gti se and took it out for the first time 2 weeks ago. I noticed splashing to the point of soaking the third seat when I would go around 15-20 mph. The water was hitting the back bumper bracket just right. Do you have any splashing? Thanks!!
Yeah I i’ve noticed when going slow the rear mount the splash up a bit. I may change it to the older mounts That go to the GTX.
Really informative and welldone video, thanks!!,
Thank you !
Another thing you can do is put a piece of tape on the drill bit. That way you know when to stop.
GREAT CONTENT 👍🏼
Nice Video 😎 I’ve got the new 2021 GTR & just purchased the Fenders & Kit. But I purchased the 295100729 snap in kit. They appear to fit pretty similar. It says in they fit 2019 and up.
This kit drills screws in horizontally and not at an angle. I have seen some use the smaller mounts but 3 holes are required for each mount.
@@AlveanAzurin yeah I’ve seen the 3 hole mount. But My dealer sold me the other two hole mount. The ones you used are the new 2021 style mount by the looks. 😎
If I have to drill holes in my equipment, it's not a "snap-in" kit lol. Shame on them for calling it that. Great video by the way.
They are "snap-in fenders" but you do have to install the mounting kit only once.
It's "Snap in" on a Spark, Anything else is a specific kit:/
Check that back screw Alvean. It look really loose when you put the bumper on.
Thank you 😊. I tightened them a little more after videoing.
@@AlveanAzurin Oh your welcome. Did want to have that fly off after one of your 180's on the ski.(After the break in period of course). :)
How to install a ladder
So are these safe to keep on while riding? Or they have to be removed each time you ride it
Definitely take off...they have a lot of drag and could wrip off
Would be good to see it at the dock
In some of the videos, you can see me use them at the docks.
I ordered these with my new 2021 GTX230. Hopefully it is worth it. Still waiting for the ski
How did it turn out?
@@AlveanAzurin well I never got the GTX230, too many delays so I ended up getting a RXTX300 instead because they had one available. Still with the fenders. Love them. Easy to put on & protects the ski 👍
@@tygallow3013 still a great ski!! Glad you are enjoying it 😁
I dig the new ski! Did you get rid of your GTX!?
Of course not 😏
Right on!
Great. What do you think of the bilge pump? Do we need a bilge pump in new seadoos?
I have a bilge installed in my GTX300 and Trixx but haven’t had any issues. It is a nice back up to have for your piece of mind. I may install one in the RXP but would like to put the drain where I can see it when riding.
Hi does this work on a 2020 KAWASKI sfx160x?
Do you have a video on how to install a tow hook grr 230? I was hard to reach it. Thanks
No Unfortunately I do not have one.
Does it matter whether it’s install port/starboard side ?
Seems like they made the bumpers come up higher Rather than we’re on the ski. Not much protection.
They work great on calm waters but are known to bump off with Rough docks.
I installed mine today on my RxtX and my screws don’t stick through like yours. I don’t think you installed them high enough or the positioning on mine is different.
Yours are different.
did you figure out the splashing to the rear seat problem? I just got the bumpers for my 21 rxtx and now i’m debating if i should installed them.
A little but not much. It’s mainly when you are riding slow and tilted more to one side.
berry good~~^^
When are you going to upload the break in part 2 video
Uploading today 😁
Hi Alvean, I had the dealer install on my rxp300 but when I ride I am constantly getting splashed on whether I ride by myself or with a passenger. When the water hits the install kit it creates a constant wave
Are you riding with the bumpers on? If so, you are suppose to be bc most Seadoo hulls do a great job of keeping spray away from the riders.
@@AlveanAzurin did you mean to say that you’re NOT supposed to be ridding with the bumpers on?
No, I am not riding with bumpers on. I noticed at the dealer they installed at 19 inches instead of 18 and at 65 instead of 64 inches with speakers
Is it a factory defect or a dealer error at installing them? Please advise
I think it might be user error. I’ve noticed some people have been riding with the bumper/fenders on and you aren’t suppose to.
Nice. Do you have the usb charger on it?
No unfortunately not
The cheap ass piece of plastic used as the retaining post (built into the foam fenders) is awful, breaks very easily, I regret getting these. Waiting for somebody to come up with a good way to replace them with something metal from a hardware store. Did you have the same experience?
No, I haven’t had that happen to any of mine. But then again I hardly ever dock anywhere that’s rough waters. If I have to dock at a rough dock, I look for a spot where I can hook up dock lines at a angle to keep my ski floating away from the dock.
@@AlveanAzurin good call, I will probably do the same, unfortunately it was my 14-year-old son who was a bit rough taking it off and he snapped it down at Matagorda Harbor :(
is any sealant/epoxy needed?
No, The kit does NOT go through the HULL, Just the outer lip.
👍😘
Is the ski broken in yet, bet your chuffed with your new ski
It’s completely broken in now. Day 2 video of break in is uploading today.
@@AlveanAzurin Great! Bet your chuffed with your new purchase.
@@dazzler5012 yes I am!!! 😆
They are $130
Are you going to add the riva Sponsors?
Not sure 🤔. I like the way it handles so far.
@@AlveanAzurin I have just ordered them for my 2020 rxt
I need ...i have to buy.
Yes! A must have accessory.
the best girls
Aww thank you 😊
Looks like you either were going to or just got out of work and didn’t have a chance to get some sweats or something on. What the hell
😂
Can I get a shout out plz?
I can try! 😁
These things are poorly made. I installed them on both my 2021 gtx 300 limiteds. They easily get knocked off the ski while docked, then you gotta go get it before it floats away. Huge waste of money. The plastic brackets cause additional drag when you’re moving.
I’m gonna replace the rub rails, then throw these darn things in the garbage 😡
Don’t throw them in the garbage! Mail them to me if you truly don’t like them. I will pay for shipping.😂..
They are really not meant for any docks with high traffic and rough. My friend and I recently did a little modification to them adding a leash/tether to them which makes them securely stay on. I just use them in Bimini Bahamas having to leave my ski in the water over several nights and they stayed on with no worries.
@@AlveanAzurin they’re too expensive for the amount of goofing around that needs to be done, in order to get them to stay on. I ordered some Velcro cinch straps to help secure them down. I’ll share my results when they arrive.