#301

[Builder's view] Tamiya 1/24 Subaru Impreza WRC '98 Monte-Carlo is in progress.
In the first part of the video, I install magnets in the additional lights attached to the bumper. In the second part, I dress up the footwell of the cockpit a bit with aluminum sheets.
I will make tweets such as the announcement of the start of the live broadcast on X(Twitter)
/ nandemo_seisaku
Various photos are published irregularly on Instagram.
Instagram / nandemo_plamo
Web site nandemo-seisak...
The photos of the finished product are summarized here plamodel.info
Facebook page / nandemoseisaku
Contact　[e-mail]
#scalemodel

[@TheMozerfok]

My man here is making the damn pedals himself. In metal. something that will not even be noticed.
You better make sure you win a prize with this build!

[@nightcrow6965]

お疲れ様です。
自分は今まで磁石をパーツ双方に必ず組み込んでいましたが、成る程…
片側は鉄であれば良いのでしたね😅
強力な磁力が必要な場所でないなら、今回のような方法で自分もやってみます。
特に磁石を組み込むスペースに余裕がない所に活用出来そうです😊

[@kenji-plasticmodels]

お疲れさまです。
片方だけ磁石だと弱くなってしまうのですが、それほど強さを必要としないのであれば位置ズレなどの問題も含めて便利に使えます。😊

[@brianmros4844]

Hi Kenji, this is the stuff I just Love to watch you do. If you electrify the headlights, I won't tell anyone. Your metal work looks like photo etched because of its accuracy. So nice to see how well it fits as well. Thank you for sharing Kenji, and have a great weekend.

[@kenji-plasticmodels]

Hi Brian, thank you as always.
I plan to turn on the lights, but I try not to say too much from the beginning because I might not be able to do it properly.😊
I'm not good with electricity, so it's difficult...

[@brianmros4844]

@@kenji-plasticmodels don’t worry you have been successful in the past

[@georgeclements2742]

Thank you again Kenji-san and best wishes.

[@reneholstkristensen9429]

🥰🤩😎😎😎😎😎

[@ガンスミス-e4o]

足元の部品をアルミのエッチングパーツに置き換えるだけでグッと見違えりますよね
ヘッドライトの部分等は光らせるのですか?

[@kenji-plasticmodels]

動画を見ていただくと分かるのですがエッチングパーツではなくてアルミの板から作ったものなんです😃
ヘッドライトに関しては内緒ですが光らせる予定です。内緒ですが。秘密。

[@ガンスミス-e4o]

@@kenji-plasticmodels 言葉足らずですみません
アルミ板からの意味で言いました
ライトの事は秘密にしますよ

[@michaelbaykara2322]

Love it Sensei- thank you.

[@briancostich4288]

I love your work. But I'am wondering if anybody will be able to see into the foot well, if the doors don't open. Because most of the time you can't see down there unless the doors open.

[@kenji-plasticmodels]

Sure, but I'm going to modify it so that the door opens.

[@adrianbekerian4518]

Hola Kenji... que pegamento usaste para la grapadora...? y como siempre me vas sorprendiendo cada ves mas con esas cosas, creo desde la ves que hiciste el Porsche no que desde tan fascinado en tus maqueta. obvio tengo una preferencia a los autos Americano como los Europeos, pero este esta muy bueno.

[@kenji-plasticmodels]

Utilicé adhesivo instantáneo (pegamento CA) para fijar las agujas de la grapadora. gracias

[@hansvandermeer7635]

Your stapler made a cameo. 😂

[@nytia117]

Very nice Kenji

[@かっちゃんチャンネル-v4p]

センタートンネルに取り付けられたアルミパーツはニー（ひざ）レストと呼ばれるもののようです。

[@kenji-plasticmodels]

その通りです😃