I have an exact shape NZE-121 model Fielder wagon of the same colour. In August 2022 I had similar damages on the same side, but not as intense. The car was repaired successfully. These guys are good considering their lack of equipment and limited resources. Respect. Trinidad & Tobago. West Indies.
Remember the Cortina which was a prize that Father Ted was supposed to look after until the competition? And the little dent that he tried to knock out? That would be me 😂😂
When you consider they work outside in the dirt with just a lever and a hammer and do it for what must be about 10 million rupees, (about 10 dollars) it's pretty amazing.
I used to deliver for Mercedes and ask the body shops why replace panels the easy way? Doesn’t your sign say body work and paint, not panel changing? They didn’t talk to me for a week. Sad.
I'm impressed. Most body shops would'nt even have attempted that repair. Thesr guys did it with just basic tools, a torch and bondo. The guy knew his stuff useing the torch to"shrink" the stretched metal. If the bondo was'nt more than one eighth thick, the repair might hold up.
There’s a reason most body shops wouldn’t have attempted that repair. Inner structure of quarter strength in compromised. Quarter skin to wheel arch edge has separated and will rust out immediately. Cutting a hole in the inside of the car to gain access to door striker area is just not part of any procedure at all. Most body shops that are professional offer lifetime guarantees. Most body shops operate in a field where any customer can post pictures of your work and destroy your reputation if this type of repair is attempted. Not to mention law suits for the safety of passengers especially children that sit in that area. So did they do okay for what they had to work with I suppose but don’t lump this into what other shops do that is miles ahead of this.
В той стороне,где они живут,не сгниёт.У нас в Сибири такая тойота не битая сама по себе начнёт гнить,а тут кузовщина без намёков на ржавчину,да и дождей у них там толком не бывает.
За год она без покрытия не сгниёт. Хорош сочинять. Максимум заржавеет. Сколько там скорость коррозии металла в средне агрессивной среде 0,05-0,1 мм, а в машине 0,8-1 мм железо в этих местах.
That was old school. Great job.
Great job,from Houston tx
I have an exact shape NZE-121 model Fielder wagon of the same colour. In August 2022 I had similar damages on the same side, but not as intense. The car was repaired successfully.
These guys are good considering their lack of equipment and limited resources.
Respect.
Trinidad & Tobago.
West Indies.
It must be also like this over in The West Indies?
Какие молодцы, без спец инструмента, хорошо сделали.
Excellent quality workmanship
unlike many commenters ,i have tried to do work like this ,it is very hard. these guys are good.
Aren't you supposed to primer paint the bare metal before applying body filler?
@@ChillToMusic87 NO
@@steveu235 How come? I would have thought it would be better to prime for better protection under the filler.
EXCELENT WORK!!!!!!!!!!! CONGRATULATIONS OF BRAZIL!!!!!!!!!!!!!!!!!!!!!!!
Неважно как ты делаешь, главное конечный результат.
so true
Remember the Cortina which was a prize that Father Ted was supposed to look after until the competition? And the little dent that he tried to knock out? That would be me 😂😂
😊
You fellows are true craftsmen, job well done 👍.
Thank you very much!
Felicitaciones desde Argentina 🇦🇷 Extraordinario trabajo👏
Excelente trabajo muy bien perfecto soy chapista felicitaciones recuperaron la pieza original buenisimo
Нууу дайте же им норьный инструмент ааа , как они так работают бедолаги . Ну лайк обязательно молодцы 👍😄
Порой при наличии всего необходимого инструмента, рукожопы так сделать не смогут.
*You are fantastic, the result is spectacular*
*Well done* !!!
Here in the US, it would have been totaled by the insurance company. LOL These guys are amazing!!!!!!
Yup, “that’ll be $200 US sir.”
Hats off to you, great job done
Я не жестянщик но сразу понятно что парни профи
Not bad considering no panels were replaced.
great job with the basic tools, but these guys kinows the basics, 👍
Thanks 👍
When you consider they work outside in the dirt with just a lever and a hammer and do it for what must be about 10 million rupees, (about 10 dollars) it's pretty amazing.
They will do it for 3 chickens and a cow
Considering the equipment and tools they used, top job in the circumstances. A blind man would be glad to see it......😊
Безногий инвалид был бы рад на этом прокатиться
Hats off, respect !
Удивительно! По сути, с одним молотком и газосваркой. Это достойно Уважения!
Amazing work
Amazing!
Excelente trabalho.
Thats an amazing job. Great work.
Thank you very much!
@@Amazingprojectspk You're very welcome.
Purani cheez ko hi repair karne wala hi Mistry khelta hai .new parts to koi bi dal deta h .is bat se kon kon kush h like kre
Great Job!
Thanks!
Творческая работа! Молодцы!
Золотые руки)) с помощью молотка кувалды и шпакли почти идеально)
Ty
WHAT A GREAT JOB YOU HAVE DONE ON THAT CAR ITS AMAZING FROM TERRY AND HAZEL IN THE UK
clueless!!
@@jon-kp2rq😂💯👌🏼
Beautiful job guys 👏
Show muito top parabéns saudações aqui do RS Brasil 🇧🇷🇧🇷
Rs 200 brzil
Дело было не в бобине, Пакистан сидел в кабине )) Круто, когда попали на серебре в цвет.👍
Perfect work
Thank you! Cheers!
I used to deliver for Mercedes and ask the body shops why replace panels the easy way? Doesn’t your sign say body work and paint, not panel changing? They didn’t talk to me for a week. Sad.
Pelo visto, *NÃO EXISTE PERDA TOTAL NESSE PAÍS!* rsrsrsr MUITO BOM!
Me gustaría saber q es esa pasta de color verde ?
Is that a fake brake disc over the rear drum?
Great work with ordinary tools ❤
У них просто нет нытиков, это не завод как плотят так и работают обе стороны хорошо это понимают.
Apresente o Mestre Han a este cara.
Кто нибудь подарите им споттер и обратный молоток хотя бы.
Ty
круто получилось!
Ужасная работа, сделано просто на от...сь.
Good repair job.
Yes, thanks
Это хорошо у них краскопульт есть,я уж подумал что после того как они вытягивали,то и красить будут в рот набирать и распылять 😮
А зачем так думал, это тоже уметь нужно
😮😮 superb
Good 👍👍👍 danter shab
Cambiar paneles sabe todo el mundo, trabajar la chapa muy pocos...
I'm impressed. Most body shops would'nt even have attempted that repair. Thesr guys did it with just basic tools, a torch and bondo. The guy knew his stuff useing the torch to"shrink" the stretched metal. If the bondo was'nt more than one eighth thick, the repair might hold up.
There’s a reason most body shops wouldn’t have attempted that repair. Inner structure of quarter strength in compromised. Quarter skin to wheel arch edge has separated and will rust out immediately. Cutting a hole in the inside of the car to gain access to door striker area is just not part of any procedure at all. Most body shops that are professional offer lifetime guarantees. Most body shops operate in a field where any customer can post pictures of your work and destroy your reputation if this type of repair is attempted. Not to mention law suits for the safety of passengers especially children that sit in that area. So did they do okay for what they had to work with I suppose but don’t lump this into what other shops do that is miles ahead of this.
@@robertcampbell5485 Baloney
Good job
Reminds me of the Jawa’s from Star Wars …
respect
Exelente trabajo pero deven usar equipo de protecsion por su salud
Good job 👍
Thanks 👍
Гидравлика? Не неслышал))
Вот они молодцы!!!😂 Ничего не боятся!!
Сделано не плохо, единственное что шпатлевка со временем лопаться начнёт
헐~~~
마지막에 한국신문이 왜 저기에 나오지??
Не знаю как там, но в моем климате после такой работы и газа, это крыло сгниёт за год под этой шпаклей.
И них каждый год солнце
Думаю не будет гнить
В той стороне,где они живут,не сгниёт.У нас в Сибири такая тойота не битая сама по себе начнёт гнить,а тут кузовщина без намёков на ржавчину,да и дождей у них там толком не бывает.
За год она без покрытия не сгниёт. Хорош сочинять. Максимум заржавеет. Сколько там скорость коррозии металла в средне агрессивной среде 0,05-0,1 мм, а в машине 0,8-1 мм железо в этих местах.
Paint booth ? What’s that ??
Considering what they have with equipment it came out ok.
Мдя.. Штатлевка творит чюдеса. А вот, если бы её не было.
Так и без неё вывели максимально.
Это жесть... хуже я не видел
Then you haven't been around long...
Я, думал, в какой-то момент он скажет- ну все и так сойдет
Gotta get these guys to America, cheap labor and they can still make money. Why replace panels like US when you can pound and work it out.
Muy raro como trabajan ! Ni tiene herramienta de Bodyshop
Только русские вечнонедовольные диванные коментаторы сделали бы лучше ...😅
Что ты имеешь против русских?😎
@@Бамбарбиякергуду02 я сам русский,угораю с соотечественников, ибо люди из за рубежа в комментариях восхищаются работой а наши главном кидаются
@@АлександрСтаровойтов-и6ъ потому что люди работают проф инструментами и для русских 60 е года дико газом греть !
@@АлександрСтаровойтов-и6ъ в нашей среде ( не там где сухо и жарко ) отожженый металл быстро гнить начнет
Arbeitsschutz ? Was ist das? lol
poor guy no welding goggles be hard on the eyes
Dang doo doo's good
мастер нет слов из ничего слепил. а запчастей нет. в каком веке они живут.
Они даже фару заднюю восстановили😮
Догоняем
了不起的手艺。
I have the same car.And run and look like new
То одна дверь то другая ;)
Só acho que deveriam limpar o pneu.
Толковые парни
Качество ремонта желает лучшего !
Magician
Не бита не крашена.
2 разных машины. На первой наковыряли, а потом бах всё ровно.
Pakistany version Artur Tusik🤭
Is it the water or the air that makes them sound like chipmunks?
We would not do that due to the cost of labor. Fitting new panels would be cheaper.
Nobody has skills or pride, oh yeah time is money.
l'eta della pietra!
Для Пакистана сойдёт...
Лучше новой!!!
Шимпанзе с рихтовочным молотком справилась бы лучше. Это издевательство над машиной
T
Trabajo mal hecho la puerta golpea con la lata 😵😵😵
Профессиональная😅😅😅😅😅 слов нет
Solche Fachkräfte gibt es in Deutschland nicht.
Alle diese Fachkräfte werden bald nach Deutschland übersiedeln. treffen.
These guys ALWAYS use OEM parts!!!!!
А когда красить , дверь нужно было закрыть
All hands down.
Back street garage in Birmingham
I don't hate it, but it was only a minor repair.
Se hace lo que se puede con lo que se tiene
ремонт по направлению страховой компании.
Amazing process 😂😂😂😂😂😂