with all the negative comments below i would like to say that he will never break that loader, very smooth style of operation and he keeps his feet clean. those lorries are not having to que up either.
It seems like he enjoys pushing the outside/bottom of the bucket against the face of the cut. Suggest don't roll the bucket so early into the push. Keep the teeth looking into the dirt until the engines dies a little, then roll the bucket slowly at the same time raise the main arm a little and then you should fill up much better. And as already been mentioned close the cab door and wear the seat belt, they are both safety devices.
Nono! Badasses don't close the door on the loader. . The keep it open until they fall out when the loader tips over and feels sorry later. But, it might be that he has his seat belt on.
At 19 years old I was put in a Cat 992 given about 1 hour training and said now do this and do it correctly. Even at 19 I knew how to load the bucket full. 17 years later I still know I was doing it correctly then and even better now. I would have been fired had I ran a loader like this.
hark at all theses great loader drivers lol . in my eyes he's doing a great job wagons my be a bit over loaded . but anyone who as had the pleasure of doing this sort of work on sandy material knows the more you push the deeper the wheels dig which in turn creates something like a bomb site. he's got a lovely flat floor so wagons can follow him back as he digs further in. my only big problem is there is no bump bank on top to stop any thing coming over to him from the next level above him
This driver succesfully increase the running cost,working with half filled bucket,i think the truck are too near to working quick besides them,and he not using second gear,the loader is a lot slower,and drinking extra fuel in first gear,sad to see it.
I ran a CAT 980C. Looks like a clay base pit to pit load out. Cone crushing limestone with clay base? I had a job loading top soil with a Volvo. Nice machine. Heaping buckets was always the goal but having to spin and rut your work area bounces ya around "a lot" and puts extra wear on the machine. Cool vid!
The problem here might be that, the goal is to keep up production, and therefore it doesn't matter if the trucks aren't fully loaded. Especially if they're just moving material from internally on the site, but I don't know, I just saw that there's a lot of trucks coming and there's always two trucks waiting to be loaded. at any given time.
I agree with everyone else Shouldn't be any more then 2 buckets if they were full and 3 if you were too actually fill the box on the trucks, Depending on the trucks.
I don't see how the truck is filled, in three passes ! The truck is maximum three quarter full ! If he had filled the bucked completely, and did what he's supposed to do, then the truck would be filled with three buckets.. This was just too painful. Couldn't even watch the whole vid.
So many bad comments here! None of the keyboard warriors know the site like the driver, even if was his first day! The bucket has greedy boards fitted and the driver is easily loading the trucks with minimal engine/trans/hyd wear.
oh my god where do we begin? how is it someone can afford a nice machine like that and the hire a yahoo to drive it? you get what you pay for!....get an operator!,,
with all the negative comments below i would like to say that he will never break that loader, very smooth style of operation and he keeps his feet clean. those lorries are not having to que up either.
Probably could load a truck with 2 FULL buckets instead of quarter buckets. Machine isn't being used to it's full potential
new operator slow work😎
Not bad for a learner
It seems like he enjoys pushing the outside/bottom of the bucket against the face of the cut.
Suggest don't roll the bucket so early into the push. Keep the teeth looking into the dirt until the engines dies a little, then roll the bucket slowly at the same time raise the main arm a little and then you should fill up much better.
And as already been mentioned close the cab door and wear the seat belt, they are both safety devices.
llv, , mv'lplc;dk
Жьллддддджжжхххэ
Юююбьт
Ю
@@РазиянХарки-и3щ مثخثخثخ٣٨٣هغ٤٢
ثقمققح١٢٢قثممقخثثخخههقخقهقخقهقههققههققههققههثهثه٣
ثمثهقهثه٣٣خ٨٣٨٣٣خخ٣خ٣٨٣٨٣٣٨٣٨٣٨٣٨٢٨
Gila keren banget
Perfect machine 👍
Apik tenan
cant ever say ive seen a operator that soft on a loader....
p ỉ
Or manage to take a half bucket with all that torque aha
Half a bucket Harry,clean the bucket out as well
Ô menino ae é grande HEIM!?🖒💪
COMO DIZ Ô DITADO
VOLVO É VOLVO 💪🖒😁
amazing loader
Could be heavy material,get that door closed make the best of a good machine and good cab. 👍🚜
الووو من
Kova boş gidip geliyo kamyona 😄😄
And close your door!!
ختبكالبةمالانمهقثصشسيىنمالمكمهليﻻةولير
Nono! Badasses don't close the door on the loader. . The keep it open until they fall out when the loader tips over and feels sorry later. But, it might be that he has his seat belt on.
free him 1m watchs When it doesn't know to fill a bucket :) :)
فولفو ٣٣٠...volvo 330 💪💪💪
احلى مصلحه بحبها كتير مصلحتي
신들린레박 사건
Ο χειριστης ειναι super
Fill the bucket & it would only take 2 passes!
At 19 years old I was put in a Cat 992 given about 1 hour training and said now do this and do it correctly. Even at 19 I knew how to load the bucket full. 17 years later I still know I was doing it correctly then and even better now. I would have been fired had I ran a loader like this.
🚜🚜🚜🚜🚜🚜🚜🚜
good operator with powerful machine
كل الود
you are kidding right? he doesent fill up the bucket and spills dirt all over the place
Saqib Jakhar ghjujujhhfddddsdñ
It seems to be very heavy because its bucket is half
So by my math, if he'd get full buckets it'd be 1.5 passes
hark at all theses great loader drivers lol . in my eyes he's doing a great job wagons my be a bit over loaded . but anyone who as had the pleasure of doing this sort of work on sandy material knows the more you push the deeper the wheels dig which in turn creates something like a bomb site. he's got a lovely flat floor so wagons can follow him back as he digs further in. my only big problem is there is no bump bank on top to stop any thing coming over to him from the next level above him
Big loader
По пол ковша берёт, а смысл так? Кто русский.. Ставь лайк
bucket half full and the truck half full . Some one is pissed at all the wasted diesel , spillage whoa some one won't be working long
This driver succesfully increase the running cost,working with half filled bucket,i think the truck are too near to working quick besides them,and he not using second gear,the loader is a lot slower,and drinking extra fuel in first gear,sad to see it.
He does not know the leadership is too bad not know how dictate dirt
خير شفل اصلي
I ran a CAT 980C. Looks like a clay base pit to pit load out. Cone crushing limestone with clay base? I had a job loading top soil with a Volvo. Nice machine. Heaping buckets was always the goal but having to spin and rut your work area bounces ya around "a lot" and puts extra wear on the machine. Cool vid!
Alpha Team Outd
oors
Alph
.ءa Team Outdoors
Alpha Tذeam Outdoors
👍👌👍👌
The problem here might be that, the goal is to keep up production, and therefore it doesn't matter if the trucks aren't fully loaded. Especially if they're just moving material from internally on the site, but I don't know, I just saw that there's a lot of trucks coming and there's always two trucks waiting to be loaded. at any given time.
This truck should be loaded by 2 passes
b d t j ll nn zzylmm v gbkl
Yep!
And the truck is too far away,The shovel will run out of diesel in a min
He should close his door and wear his seat belt
The cab door is open with a purpose,for kicking out of it this operator who cannot scoop a full shovel of soil...
The seat belt is less big problem.
LOL
andban92 ever hear the saying if you do all the work today you get no pay tomorrow
Could have done it in 2 buckets if he just filled it right up
I agree with everyone else Shouldn't be any more then 2 buckets if they were full and 3 if you were too actually fill the box on the trucks, Depending on the trucks.
Uma máquina top de mais. Mais trabalha com meia concha e ainda volta material na concha. ou não pode encher a concha
I can fit more dirt in my back pocket
These trucks have to go on roads so they are weight limited. This loader is oversized for this application
Ese pinche maquinista no es rapido mi abuelita👵😊 con una pala llena mas pronto los camiones👍😁
so painful to watch...
even my 2.5 year old is asking why he doesn't fill up the bucket.
great point of view tho
I feel the same. With such a big machine its so important to maximise each load cycle.
Dense
Dense jcn
ufb
hcnc
Matthew Sorensen ن84
Matthew Sorensen ə7
Wow I can hear several old bosses screaming lol
Amen to that.My boss would be pointing at every corner of that bed
셧다운제
اه
Eu trabalho com uma l60f ja acho Boa imagina uma dessa ai
Half bucket joe
I don't see how the truck is filled, in three passes ! The truck is maximum three quarter full ! If he had filled the bucked completely, and did what he's supposed to do, then the truck would be filled with three buckets.. This was just too painful. Couldn't even watch the whole vid.
Ķo9
Pelo amor de Deus cara enche essa casamba de terra cara que isso
عبي السطل منيح ياغشيم
Таким ковшом полный не набрать! Грузить по полковша😂
He dont filling the bucket good enough, and the truck can handle 35tons, why dont fill it up better right away??. Bad driver!
Doesn't fill the bucket, doesn't fill the truck...waste of equipment hours and money.
* dang...
1.5 tire revolutions. And your truck is so wrongly parked
llenalas compa
Never saw a full scoop. No need for the welded on additions to the bucket so it can hold more.
ض
have the experience operatore
Bad operator work. It can be downloaded in two cycles. 😫
!!!!!!!!!
He can't even fill a bucket on soft digging
Why do we say 'passes' instead of buckets ?
chris dee йц
chris dee ж
chris dee 4f88hh
initial
iju
egcfxhtbg
my cat 924k could load this truck faster than that guy can get a full bucket 😂😂
Your cat could swim the Atlantic before he could get a full bucket.
It would be faster with a wheel barrow and a shovel
Isi be bucket cuma separoh
So many bad comments here!
None of the keyboard warriors know the site like the driver, even if was his first day! The bucket has greedy boards fitted and the driver is easily loading the trucks with minimal engine/trans/hyd wear.
الو
بل زحمه
Don’t know why he can’t do it in 2 passes the bucket is only half full
Halve bakken
Lilttle quarter buckets wtf go into pile push curl lift repeat I’ve never did that not even on my first scoop
big Nate The material is dense, bucket is too big for it to be full
Is this green stuff Copper Sulphate Ore..?It could be heavy..
دظم٠٨٧٦٦٥٥عت
Eu doido pra vê o cara da uma conchada cheia mas o cara só pega meia concha kkk.
바가지 왜 키운거여 흙을 푸다마냐
lol i run a cat 980 and a 966. he should pull the bank down a bit first then fill the entire bucket.
DOUG FERGUSON the best ى بل زز 8
966 operator here✊ I understand that heavy equipment isn't indestructible but this guy is scared to give it some ass. Lol
Don't give up your day job, what ever that is?
numheed AERUJBVUHGGUUUUJJ
numheed x
خدایا ای صاحب ارزو ای خدا چه میشد منم این لودر را داشتم آخه من راننده لودر هستم ای دوستان به آرزویم توجه کنید
K putas dijiste
Should be able to hit payload in those trucks with 2 passes insufficient loader operator
Ricky Castro there taking the dawb not want brown sand inbetween
shane d kc
Ricky Castro khk
Ricky Castro he is taking care of wheel loader
He is doing a good work, the bucket is too big to load that kind of material.
Aparently it was increased to work with another kind of material too.
ما
ؤ
Operatör acemi. Yüklemeyi bilmiyor kepçe hep boş kalıyor.. dorsede de boşluklar bırakıyor.
Q capacidad tendrá esa pala repleta???
This guy is wasting time by not getting a full load!! A half of scoop means more trips more wait time More fuel And lest load hauled!!
oh my god where do we begin? how is it someone can afford a nice machine like that and the hire a yahoo to drive it? you get what you pay for!....get an operator!,,
DbMaddoيشثةرسش1ؤشضg
DbMaddog Need.some........TRAIN.N
ممكن السعر
Es un poco malo este palista ehhhh???!!! pala al 50% de capacidad....
Roberto Cuadrado Pedroviejo hh
Roberto Cuadrado Pedroviejo vh hi
jnn
مرحبا
Pensé que fui el único que lo noto demasiado poco esos auto volquetes con dos palas al 100 los llena
Absolute worst operator I have ever seen period
Operador fraco
This is painful to watch.
andban92
Buda operatörmü halen kovayı doldurmayi bilmiyor
احمد
He could have done it in 2 passes with fuller buckets. And shake that bucket after you grab a load
' 0 w hg
00
J ju
Um meia concha.
My dad would have kicked me in the ass for putting the bucket on the ground so far from the bank.
Depends on what your trying to achieve doesn't it it's not one golden rule for every application
empty backet?? xa xa xa xa Volvo pf pf pf
LOY
Must be paid per pass... Thats gave me a lot of anxiety to watch....... :/
فالفو
Что по пол ковша берёт то!!!
ตักไม่เต็มบุ่งกี๋เลย
Este operador esta medio raro por que opera pero sin adecuada medida 😴😴
What is this guy doing at 3:05?? How can be someone working like that?
emuloVretsaM ج