Reset WT Box (Waste Unit) for Brother HL-3040CN, HL-3150CDN , HL-3070CW تصفير

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ต.ค. 2024
  • يوجد مجموعة من الفيديوهات /\ /\ /\ ذات صلة بالطابعة
    إخواني الكرام رأيكم بهذه القناة المتواضعة يهمنا من أجل تقديم الأفضل لتعم الفائدة على الجميع.
    ندعوكم للإشتراك في القناة Subscribe
    وتفعيل الجرس ليصلكم كل جديد وتشاركونا آرائكم
    كما ندعوكم لإضافة أي ملاحظة ليستفيد منها الجميع
    وتقييم الفيديو بـ Like or Dislike
    ومشاركة الفيديو مع الأصدقاء Share
    شـــــــــــاهد /\ /\ /\ المـــــــــــزيد
    يمكنك الاطلاع على كافة قوائم التشغيل في القناة من هذا الرابط Playlists
    / @computerprinterclinic...
    ------------------------------------------------------------------------------------------------------------------------------------------
    Brother HL 3150CDN خطوط على الورق في
    • Brother HL 3150CDN خطو...
    Brother HL-3040, HL-3150, HL-3070CW LED Cleaning تنظيف الليدات في طابعات البرذر وأهميتها
    • Brother HL-3040, HL-31...
    reset Toners; Drums Etc in Brother HL-3040CN , HL-3150
    • reset Toners; Drums Et...
    Brother HL-3150CDN Toner, Drum, Belt ... etc Reset كيف تصفير
    • Brother HL-3150CDN To...
    Brother HL-3150CDN, HL-3070CW , HL-L2365DW , HL-5340 ... Drum error
    • Brother HL-3150CDN, HL...
    Brother HL-3040; 4040 ,HL-3070CW مشكلة سحب الورق وحلها
    • Brother HL-3040; 4040 ...
    Brother HL-3040CN , HL-3070CW ازالة النقاط التي تظهر وتتكرر على الورق بسبب الدرم
    • Brother HL-3040CN , HL...
    Brother HL-3040 , HL-3070CW كيف تصفير
    • Brother HL-3040 , HL-3...
    Brother HL-3040CN , HL-3070CW اختفاء جزء من الكتابة في طابعة
    • Brother HL-3040CN , HL...
    Reset WT Box (Waste Unit) for Brother HL-3040CN, HL-3150CDN , HL-3070CW تصفير
    • Reset WT Box (Waste Un...
    Drum Cleaning تنظيف الدرم يوفر عليك التبديل
    • Drum Cleaning تنظيف ...
    Brother HL-3040CN الحل لرداءة الألوان
    • Brother HL-3040CN الحل...
    Brother HL 3040CN الورقة متسخة وتبين أن السبب بسيط
    • Brother HL 3040CN الور...
    Brother HL 3070 البلت هو السبب في إنحراف الصورة والكتابة
    • Brother HL 3070 البلت...
    Fuser ملخص لمشاكل الفيوزر في طابعات الليزر
    • Fuser ملخص لمشاكل الفي...
    Brother HL-3150CDN Fuser Damaged مشكلة الفيوزر والخلل المصنعي في طابعة
    • Brother HL-3150CDN Fus...
    تصفير علبة الحبر التالف دون تبديلها
    Reset WT Box (Waste Unit) for Brother HL-3040CN, Brother HL-3150CDN

ความคิดเห็น • 19

  • @computerprinterclinic2798
    @computerprinterclinic2798  4 ปีที่แล้ว

    تصفير القطع في الطابعات يوفر علينا الكثير
    عندما تخبرنا الطابعة أن العمر الإفتراضي للقطعة قد إنتهى فهذا لا يعني أن القطعة التي كانت تطبع قبل دقائق بشكل ممتاز قد أصبحت تالفة ولكن العملية مبنية
    على أرقام وغالباً ما يكون عمر القطع أكثر بكثير من الأرقام الإفتراضية وخاصة فيما يتعلق بالدرم والبلت والفيوزر والرولات
    (Drum, Belt Unit, Fuser, Feed Rollers, Transfer Roller)
    أولاً الحبر: يمكن إجراء هذه العملية مرة واحدة بعد انتهاء الحبر وذلك للاستفادة من الكمية المتبقية من الحبر، أو تنفيذها عند تركيب حبر جديد أو عند إعادة تعبئة الحبر
    ثانياً: باقي القطع وتشمل الدرم والبلت والفيوزر والرولات يمكن إجراء هذه العملية مرة واحدة أو أكثر بعد انتهاء العمر الإفتراضي الى أن تتلف تلك القطعة
    وتتفاوت سهولة وصعوبة عملية تصفير قطع الطابعات من شركة الى أخرى فمثلاً أسهاها البرذر
    أما طابعات الأوكاي مثلاً فبحاجة الى شرائح الكترونية لإجراء عملية التصفير للقطع

  • @kneeldownb4me
    @kneeldownb4me 3 หลายเดือนก่อน

    Thank you very much

  • @alancristiano1699
    @alancristiano1699 2 ปีที่แล้ว

    Very good, Thanks from Brazil!!!👏👏👏👏👏👏👏👏

  • @heidinhachisholm
    @heidinhachisholm ปีที่แล้ว

    Thanks to share it❤

  • @jameslumsdenkeys4846
    @jameslumsdenkeys4846 3 ปีที่แล้ว +4

    Worked on printers and photocopiers for more than 15 years and tell you now that the toner is toxic and I certainly wouldn't be using an air compressor to clean these units out!

    • @computerprinterclinic2798
      @computerprinterclinic2798  3 ปีที่แล้ว

      thanks for this advise
      i do this after emptying the main powder

    • @BornAgainCynic0086
      @BornAgainCynic0086 2 ปีที่แล้ว

      MSDS indicate it's safe but tot to atomise it due to lung irritation, but not actually toxic.

    • @jameslumsdenkeys4846
      @jameslumsdenkeys4846 2 ปีที่แล้ว +2

      @@BornAgainCynic0086 The toner contains 99% plastic and 1% organic pigment.
      The plastic when heated to melting point causes toxic fumes and is related to Chronic illness such as Chronic fatigue for one and can put an acid lining on your lungs.
      These printers and laser copiers must be used in a well ventilated area or you'll end up with health problems later on.
      Nearly all printers and laser copiers have rear heat output ventilation grilles. Over a period of time the walls behind these laser units will display excess toner that will be present on the wall as well.
      Don't always believe that a manufacturers claim that these toners and powers are safe within guidelines because after 30 years I'm still suffering from exposure to this crap years later.

  • @computerprinterclinic2798
    @computerprinterclinic2798  5 ปีที่แล้ว

    شــــــــــــــــاهد /\ /\ /\ /\ /\ /\ /\ المـــــــــــــــــزيد
    Playlists يمكنك الاطلاع على كافة قوائم التشغيل في القناة من هذا الرابط
    th-cam.com/channels/MQEb5XU2e0hKfPiH2QRnrQ.htmlplaylists?view_as=subscriber

  • @BornAgainCynic0086
    @BornAgainCynic0086 2 ปีที่แล้ว

    I think the flag in the clear window has to be re-set as well.

  • @RichardSamudio84
    @RichardSamudio84 3 ปีที่แล้ว +1

    Entendi todo 🤣

  • @abdulkareebaka3501
    @abdulkareebaka3501 3 ปีที่แล้ว

    DCP-L3551CDW reset Waste toner T-223CL ?

    • @computerprinterclinic2798
      @computerprinterclinic2798  3 ปีที่แล้ว

      كما في الفيديو
      فرغها من الحبر وأهم شيء بعد ذلك تكون الزجاجة السفلية نظيفة