Looks like condensation imo, but doesn’t mean it’s not possible. Check your coolant occasionally to see if it’s loosing any, is so if you take a spark plug out and notice it’s very hard to remove then likely a head gasket. Praying that it’s not tho !
Is it cold out there? If so that's normal, the valves knock a little imo but likely because how cold it is there. Check the oil, if it looks like chocolate milk that's definetly head gasket (oil mixes with water, check coolant level while you're at it. *Check it cold!!!*) If it is head gasket you can try several things, look at ChrisFix's youtube channel and Scotty Kilmer's channel about the topic. Two big names here on YT, they know most of these in and out. Chris can help fix it, Scotty talks about it in dumbed form (but gets to the point) Good luck! Edit: ay yo why your video got recommended to me lmfao
Well the compression, leakdown, borescope, and coolant system vacuum tests all went successfully, everything looks absolutely perfect. Going to just keep driving it and send an oil sample to Blackstone Labs at the next 5000mi interval.
Looks like condensation imo, but doesn’t mean it’s not possible. Check your coolant occasionally to see if it’s loosing any, is so if you take a spark plug out and notice it’s very hard to remove then likely a head gasket. Praying that it’s not tho !
Check the oil cap. If theres white froth on it or underneath then you probably have a head gasket failure
No white froth underneath the oil cap. Thank you for the suggestion however
Is it cold out there? If so that's normal, the valves knock a little imo but likely because how cold it is there. Check the oil, if it looks like chocolate milk that's definetly head gasket (oil mixes with water, check coolant level while you're at it. *Check it cold!!!*)
If it is head gasket you can try several things, look at ChrisFix's youtube channel and Scotty Kilmer's channel about the topic. Two big names here on YT, they know most of these in and out. Chris can help fix it, Scotty talks about it in dumbed form (but gets to the point)
Good luck!
Edit: ay yo why your video got recommended to me lmfao
That just looks like condensation
Yes it looks totally fine.
yeah either headgasket or cracked block, you can buy a headgasket tester from harbor freight for cheap.
I got all the equipment to test compression, leakdown, and a borescope. Will be working on it this week.
Well the compression, leakdown, borescope, and coolant system vacuum tests all went successfully, everything looks absolutely perfect. Going to just keep driving it and send an oil sample to Blackstone Labs at the next 5000mi interval.
@@bwiren13 your oil has to be mixing with another liquid if it looks like chocolate milk. post a video of how your oil looks.