Things that beginner welders need to practice If you want to be a professional
ฝัง
- เผยแพร่เมื่อ 24 พ.ย. 2023
- Things that beginner welders need to practice If you want to be a professional
Hopefully inspiring and hopefully useful
Don't forget to subscribe!!
#howtoweldforbeginners #welding #welder #beginnerswelder #weldingsquaretube #weldingmachine #การเชื่อมเหล็ก
#beginnerswelder #welding #sickwelding #welder - แนวปฏิบัติและการใช้ชีวิต
Would really help us newbies if you posted what amperage your using, what rod and thickness of material your attempting to weld. Critical information is missing here. 😕
Gracias, pero... ¿Qué Polaridad se usa en este tipo de soldadura? ¿Directa o Inversa?
Thanks u ❤
Good job
Biginars good impormetion
what welding rod are you using? 6013? will this technique work with all rods? thanks.
not allowed to brake arc weld anything tested
Thanks for the info
ভাই 1g 2g 3g এগুলার মানের কিহ্ 🥱🤔
Şimdiye kadar izlediğim en güzel kaynak uygulaması. Her açıdan nasıl kaynak yapıldığı anlatılmıştır
but u can brake arc for thin material
спасибо
lmao the vertical hahaha
Sir ye bataiye kitmota material pe kon rod se welding mare
What a welder needs is to master AC and the E6013.
That 3G tho 😂
Material thickness?
2mm
5g 6g video chai
I don’t under this… lol use a smaller rod. lean how to manage your heat input.. you are most likely getting lack of fusion and probably a bit a porosity. Kids do not follow this advice 😅
👍👍👍👍
For your own crap its fine but you would definitely bust that weld if tested
❤
This is not so good
AMPER?
same welding showed 4t time with various name foul.
That is not how you weld. I'd like to see those welds xrayed.
Tac tac tac tac, not actually welding anything. Horrible example, misleading about welding. Do not think this is acceptable
❤ใม
.ม
.
😮not right welding.
Kaha se ho Bhai
Thats what I call "Dot" welding! Slow but Works all the time, all positions.
0:12 0:14 0:16 😅😮😢😮လလါ်ြ
NOT how welding is done. As a welder of 30 years, I promise that you will not be employed for 30 minutes using this technique.
Totally agree that's not welding it's tacing
What is the correct welding? Can you show me I want to learn proper welding
@@nujnraelslliks This is ok for non structural things, this square pipe is 2mm thickness , it is quite difficult to weld it "properly", In USA they do not have these pipes, they are usually 3-4 mm and that's why they can weld it without burning holes.
Delinmememesi için 10 numara kaynak.tesekkurler ve Tebrikler.
Begenmeyenler ince profil kaynağını gosterebilirmi.
😂😢😅