Thank you for watching my video! Please comment with where you are from so that I can say hi. If you want to you are also welcome to tell me about your system, or what you plan.
Halo oom Pierre baie dankie vir jou video. Ek het so baie geleer in die kort video. Ek kan nie wag om die res te kyk nie. Ek is hier in die Noordwes Provinsie
What size reservoir tank would I need for 20 vertical grow towers, with a flow rate of 10L to 25L per hour? I plan on using dosing pumps to maintain PH and EC values. Could I get by with two 70 gallon tanks? Always using one and having another as a backup, ready to be used. Or should I just use one 140 gallon tank? The information you provide is very relevant to the subject. It provides me with the help I needed for a project I have been planning. I purchased your Learn Arduino With Pierre course, it was everything I hoped for and MORE! I will be purchasing Aquaponics and Hydroponics course soon, because I am very interested in Vertical Grow Towers. The information is provided at a reasonable price.
Hi I am planning to build a 12 gully/channel NFT system. This has helped me for the pump calculations. Although I still cannot find a good source to decide my sump/reservoir capacity. If you have any comments, it would be a great help. Thank you1
Clear and concise, thank you. One question, the requirement for a vertical system, you state it at 10-25L/H - is this the same for a 2" vertical grow-pipe and for a 6" vertical grow-pipe? This is the magic number I've been searching for and haven't been able to find anywhere else. I trust that you've tested this flow rate, so that's where I'm going to head. Again, thank you.
Hi, I’m using DFT system , and I want to ask is it okay if I let my 4500L /H run on maximum for a 200L growbed? My head is just 1m and it says the the graph that the flow rate is gonna be 3500L/h if I circulate too much it’s not gonna have any negative impact right?
Great job, thanks for the priceless information sir. I'm planning to have about 6 growbed connected using rdwc system. Please, What would be the size of my reservoir? Amos from Nigeria.
![เจ็บที่ยังฮัก - ม่อน วรวิทย์ [ Official Mv ] จอนนี่มิวสิค](http://i.ytimg.com/vi/KALIGSRSjFs/mqdefault.jpg)
Thank you for watching my video! Please comment with where you are from so that I can say hi. If you want to you are also welcome to tell me about your system, or what you plan.
Thank you so much. loved the liters instead of gallons. helps us South africans understand better
Very informative and clearly explained.
Halo oom Pierre baie dankie vir jou video. Ek het so baie geleer in die kort video. Ek kan nie wag om die res te kyk nie. Ek is hier in die Noordwes Provinsie
Hi George, ek is bly jy geniet die video's.
Thanks for this explanation. Really helpful.
I'm using 2 5 gallon buckets for 2 vertical towers.. Thank you!
this was the perfect video for this. answered 100% of what i needed to know! thank you alot!
My pleasure!
Very informative and helpful.
thank you a lot . you helping me a lot
Glad to hear that!
What size reservoir tank would I need for 20 vertical grow towers, with a flow rate of 10L to 25L per hour? I plan on using dosing pumps to maintain PH and EC values. Could I get by with two 70 gallon tanks? Always using one and having another as a backup, ready to be used. Or should I just use one 140 gallon tank? The information you provide is very relevant to the subject. It provides me with the help I needed for a project I have been planning. I purchased your Learn Arduino With Pierre course, it was everything I hoped for and MORE! I will be purchasing Aquaponics and Hydroponics course soon, because I am very interested in Vertical Grow Towers. The information is provided at a reasonable price.
You can use the 70 gallon tank. Main thing to consider in a hot area is how you will keep the temperature down.
Thanks a lot Pierre. This was very informative and helpful. It took some time to understand though.Thanks again.
Glad it was helpful!
Great video. Thanx for the easy explanation.
Glad it was helpful!
Hi
I am planning to build a 12 gully/channel NFT system. This has helped me for the pump calculations. Although I still cannot find a good source to decide my sump/reservoir capacity. If you have any comments, it would be a great help. Thank you1
Thank you very much.Very useful video.
Glad it was helpful!
Clear and concise, thank you.
One question, the requirement for a vertical system, you state it at 10-25L/H - is this the same for a 2" vertical grow-pipe and for a 6" vertical grow-pipe? This is the magic number I've been searching for and haven't been able to find anywhere else.
I trust that you've tested this flow rate, so that's where I'm going to head.
Again, thank you.
The flow rate is typical for 4" vertical pipes in hydroponics systems. It is a bit more for aquaponics.
Very helpful , thanks a lot !!
Hi, I’m using DFT system , and I want to ask is it okay if I let my 4500L /H run on maximum for a 200L growbed? My head is just 1m and it says the the graph that the flow rate is gonna be 3500L/h if I circulate too much it’s not gonna have any negative impact right?
No it will be fine.
Great job, thanks for the priceless information sir. I'm planning to have about 6 growbed connected using rdwc system. Please, What would be the size of my reservoir? Amos from Nigeria.
Excellent!
Thank you! Cheers!
Baie dankie. Jy mag maar n Afrikaanse video maak. Daars baie van ons.