Sign StandOff Caps & Barrels

www.standoffsy...
We are a wholesale company to your business. Register with us today.www.standoffsy...
Not a business? no problem, use this link: www.standoffsy...
Our tech lead will teach you how to install StandOff Caps and Barrels. These are guidelines for installing single and double layered sign systems. You don't have to register with us to call and learn more about Gyford Standoff Systems. Leave a comment below, Call 775-829-7272 or contact us at [e-mail]

[@uknighthuntingvision93]

My prints never utilize such stand off bolts............ absolutely horrible looking and detract from artwork.

[@Standoffsystems]

Thanks Monte!

[@irwansyahputra270]

what type of all screw thanks

[@Standoffsystems]

Irwansyha,
For this install we use a self-drilling wallboard assembly (Gyford HD-AWB2) www.standoffsystems.com/product/self-drilling-wallboard-anchor-assembly-2/
They are 5/16-18'' thread.

[@mustardseed308]

My opinion is they are too big. Take attention away from the art. Perhaps smaller in diameter.

[@Standoffsystems]

Thanks Mustard Seed.
Agreed these 1'' caps are a little large for this demonstration (or the art too small). We carry caps and barrels as small as 1/4'' diameter and up to 2-1/2'' low profile. Custom colors are available too, so the hardware can blend with the installation.

[@Mindswirl21]

I have the same sentiment when your vid first started

[@dilshanweerakkodi8848]

Sir I made a light board for teaching. I need to stand that. It is 6*4 feets with 5 mm thick. Can I use this method to make a stand. Do you have another method

[@davidcurrie8564]

can i get these for brickwork? thank you

[@aybin.v.k9562]

Thanks

[@ivanoutside]

Thanks mate, but can you tell me how to install standoff caps on glass door?

[@Standoffsystems]

Ivan Li,
Before your glass door is manufactured you'll want to specify where the hole locations will be, as you cannot drill into tempered glass. IMPORTANT: We supply plastic tubing to go over the steel stud and protect glass or resin from chipping.
If your glass does not have holes, Standoff Edge grips may be a solution.
Here is a link : www.standoffsystems.com/how-to-guides/how-to-install-adjustable-edge-grips/
Also, [e-mail] is where you can send us a rough sketch and we can open an in-depth dialogue about your project. Possibly adhesives and backer plates too.
Thanks Ivan Li

[@ugojoy9816]

wow...

[@RiseOm]

b

[@arjietotypon9454]

What's the name/type of screw you mounted on the wall? The one with a headless threaded. The video on 1:42. I appreciate if you reply. Thank you!

[@Standoffsystems]

1:42...That is a Gyford Combination screw assembled into a Wallboard Anchor. Gyford Part Number HD-AWB2
The Combination Screw is a Gyford manufactured part available at standoffsystems.com or Gyford distributors (LInk below).
The Wallboard Anchor is available at hardware stores.
www.standoffsystems.com/product/self-drilling-wallboard-anchor-assembly-2/
www.standoffsystems.com/product/516-18-to-8-combination-screw/
www.standoffsystems.com/product/self-drilling-wallboard-anchor-assembly-2/
www.standoffsystems.com/product/self-drilling-wallboard-anchor-assembly-2/

[@lindaz.9787]

I have a question - Is this will be impossible to hanging on the wall 2m*1m large toughened glass painting, glass thickness 12mm, without frame and holes in glass?? And if, yes, then how i can do that?
I will be very thankfull for your answer.
Linda

[@Standoffsystems]

Indeed,
This can be achieved with standoffs.
Edge grip standoffs may also be used If the glass is tempered and cannot have holes drilled into it without shattering.
www.standoffsystems.com/products/standoffs/edge-grips/
We would need to discuss the hardware used, based on the attachment surface.
Give us a call and we can work out the details. 775-829-7272

[@lindaz.9787]

How many standoffs i will need for this glass (2,25m*0,90m; thickness 12mm)?? How much standoffs i need at the bottom and the side of the painting??

[@Standoffsystems]

Linda Z.
To answer your question: Typically 1 standoff every .6m. You may require 12 standoffs for this glass. Maybe less depending on the mounting surface.For accurate and free estimates. Please contact our tech lead: Robert Borden [e-mail] We need to know the mounting conditions, type of glass, or shape of glass edge. We will also confirm the weight of this glass with you.

[@robira1313]

Do you sell to the public?

[@Standoffsystems]

Hi Rob - We are a wholesale company, and currently only sell to those individuals who have a resales or tax exempt license. To find an authorized retailer, click here: www.standoffsystems.com/retailers/

[@llewelynhawke4762]

Thanks a lot! Great video!

[@Standoffsystems]

Thanks Llewelyn Hawke!