Manual Clutch Conversion Honda XRM125

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 พ.ย. 2024

ความคิดเห็น • 347

  • @motocarldiy
    @motocarldiy  3 ปีที่แล้ว +32

    Noted.
    Di na kailangan tanggalin yung clutch lining sa loob. para di mawalan ng balance ang segunyal..
    salamat sa mga tips ng mga master dito. rs

    • @sanomoto1134
      @sanomoto1134 3 ปีที่แล้ว +1

      Kaya nga paps sakin tinanggal ko same tayu tunog nga makina pag release ng clutch. Umuga uga

    • @docmarvs0801
      @docmarvs0801 3 ปีที่แล้ว +1

      sige paps salamat gagawin ko yan ☺

    • @lemazur1976
      @lemazur1976 3 ปีที่แล้ว +1

      Paps tanong lng poh k paps motor k poh lifan110 ngun paps gusto k poh sana palitanun cylinder block ng lifan110 k paps mag fit poh kaya un block ng xrm 53mm paps sana mapansin u poh msg k poh tnx paps

    • @jhersburac6586
      @jhersburac6586 2 ปีที่แล้ว +1

      bos ano size ng washer na ginamit mo

    • @fpsph4446
      @fpsph4446 2 ปีที่แล้ว +1

      D ba dilikado yan spacer lang baka dumolas lang at pumalya sa gitna ng daan

  • @jhasonce40
    @jhasonce40 2 ปีที่แล้ว +2

    Sa lahat ng nag tutorial ito ma's solid na content 👌 detailed salamat idol salute ✌️ sana smash 115 clutch tutorial naman 🙏

  • @blackpantherbpms01
    @blackpantherbpms01 3 ปีที่แล้ว +3

    Inaabangan ko ito Paps. Salamat sa tutorial. Solid! 🙌

    • @boygahi4167
      @boygahi4167 3 ปีที่แล้ว

      anu size ng washer papz?

  • @christianmarkhipe5905
    @christianmarkhipe5905 3 ปีที่แล้ว +4

    Mas maganda idol hindi tinatangal yung loob ng primary clutch para balance parin sigunyal nya. Ma vibrate yan pag wala yung clutch shoe. Sisirain pa side bearing mo nyan. Tapos dalawang ikot sa ngipin ng primary para mawala lagutok. Naka manual clutch din xrm ko idol.

    • @motocarldiy
      @motocarldiy  3 ปีที่แล้ว

      pansin ko din.. salamat sa tip boss.

    • @blitzzgaming5183
      @blitzzgaming5183 3 ปีที่แล้ว

      Welding din ba sayo lods?

    • @christianmarkhipe5905
      @christianmarkhipe5905 3 ปีที่แล้ว

      Hindi boss. Washer lang po tapos baliktad spring lang

    • @FRAMEOFRIKKA
      @FRAMEOFRIKKA 3 ปีที่แล้ว +1

      Boss, maingay kasi pag di tinanggal yung clutch shoe kasi malaki na yung gap ng bell sa clutch shoe. Pano ba mawawala yung ingay ng primary clutch kahit di tanggalin yung clutch shoe? Pls rep. Thanks

    • @kevinalbarracin3198
      @kevinalbarracin3198 ปีที่แล้ว

      ​@@blitzzgaming5183nkita m nmn na dna winelding

  • @guerrerogeoffkurts.9138
    @guerrerogeoffkurts.9138 3 ปีที่แล้ว +2

    Solid talaga mga tutorial mo paps,more content to come

  • @No.Comment1020
    @No.Comment1020 2 ปีที่แล้ว

    Panalo pag tuturo mo idol. Maraming salamat eto yung susundan ko

  • @rojensonkellymejos8388
    @rojensonkellymejos8388 3 ปีที่แล้ว +1

    Soliddd papss. Pinakahihintay ko💓

  • @modifieddriverjbugz5768
    @modifieddriverjbugz5768 3 ปีที่แล้ว +2

    Hindi kaya maiistress ung washer kapag gnamit sa hard trail Yan?

  • @basalocharlesjohnsy4950
    @basalocharlesjohnsy4950 3 ปีที่แล้ว +1

    Ganda nang pagka explain salamat sa idea po boss. 👍 Saan po tayo ka bili nang hydraulic clutch ?

  • @elcazaesports68
    @elcazaesports68 3 ปีที่แล้ว

    Boss carl diagram naman po para sa turn lights ng motor front and rear ikaw lang kasi nakita kong magaling mag explain sa mga wirings ng motor 🔥💓
    #SANAMAPANSIN👊🔥

  • @reyjohnmacarulay3101
    @reyjohnmacarulay3101 3 ปีที่แล้ว

    Ang lining sa primary boss..ibalik pb.ndi mo kc pinakita na binalik ang lining.pro rb ito gawin sa improvise clutch

  • @markjadebanguis5913
    @markjadebanguis5913 2 ปีที่แล้ว +2

    Boss, kamusta po so far ang pag gamit nyo ng clutch? Okay po ba. Di po ba sya tumatakbo kapag pinipihit mo ang clutch?

  • @alirazan5513
    @alirazan5513 3 ปีที่แล้ว +4

    bossing bakit sakin bossing , if umiinit makina nya , tumatakbo sya konti kahit naka clutch? ano po reason nyan? .. if bagong andar hndi naman tumatakbo, pero if umiinit na sya, tumatakbo sya kahit nag ka clutch ka

    • @yrathero1565
      @yrathero1565 10 หลายเดือนก่อน

      Adjust mo clutch cable mo

  • @earlcarlodelacruz1849
    @earlcarlodelacruz1849 3 ปีที่แล้ว

    Polish mo muna yung push rod pin niya paps para maganda play

  • @seanbernardino9620
    @seanbernardino9620 3 ปีที่แล้ว +1

    Boss. Goodpm sayo. Tanong ko lang, Same lang Clutch Convertion Kit ng Xrm 125 Carb sa Xrm 125 fi?

  • @rainzalvarado4438
    @rainzalvarado4438 ปีที่แล้ว

    Sir my tutorial ka pano patigasin yong kapit ng hydrolic clutch

  • @mikemocay4194
    @mikemocay4194 ปีที่แล้ว

    Kung alam nyo lang kakapagud mag manual... Sa lahat ng motor si semi automatic lang ang pinaka comfortable gamitin sa long ride at traffic... Mas pipiliin kupa sa comfort si semi automatic kaisa sa automatic na motor... Try nyo ma papaisip din kau..
    3 years akong gumagamit ng manual
    3 years di ako gumamit ng automatic
    Weeks palang ako gumamit ng semi automatic... Dito nalng ako sa semi hehehe dito ko na hanap comfort ko..
    RIDE SAFE

  • @yanotv282
    @yanotv282 3 ปีที่แล้ว +1

    galing mo sir..klaro na klaro gawa mo

  • @detablanvonfrancis4923
    @detablanvonfrancis4923 2 ปีที่แล้ว +1

    Paps wala bang side effect yan sa motor pag nag tagal? Salamat po

  • @jhaddillapaz7237
    @jhaddillapaz7237 3 ปีที่แล้ว

    galing mo talaga motocarl 👌

  • @nelmariquit4535
    @nelmariquit4535 3 ปีที่แล้ว

    paps hanap nalang ako ng sirang clutch bell. or primary clutch tapos e welding. tapos itago ko nalang yong stock.. salamat sa tutorial.. paps ball race nanaman sunod mong tutorial pa shout out. salamat RS ALWAYS..

    • @fpsph4446
      @fpsph4446 3 ปีที่แล้ว

      hanap ka din ng crank case na may butas or bubutasan mo

  • @Thooor17
    @Thooor17 3 ปีที่แล้ว

    Anung issuee boss sa ngayon? Wala naman naging problema compare dun sa hindi na welding?

  • @yhapets1759
    @yhapets1759 3 ปีที่แล้ว

    Solid nito paps ❤️

  • @nurhaliljasani5020
    @nurhaliljasani5020 ปีที่แล้ว

    sir newbie question ano po benefits ng conversion ng semi matic to full manual?

  • @jessiebodullo
    @jessiebodullo 2 ปีที่แล้ว

    lods parang sira n kc ung clutch lifter arm ng Rs125 ko, kahit kc naka piga nkajot na..nka manual cluth din kc ako,, 1 year na mahigit,, ano kyang pwede replacement d2, kapareho nya na motor?

  • @JovanieFrancisco-u4w
    @JovanieFrancisco-u4w หลายเดือนก่อน

    Papss kung lagyan nalang nang stopper balancer Ok ba yun kasi naka balqnce na
    Hindi naba masisira

  • @denmarkdequiros6188
    @denmarkdequiros6188 3 ปีที่แล้ว

    Goodafternoon Paps. Binaligtad mo padin ba yung tatlong spring niya? Or yung washer lang talaga ginawa mo para sumabay siya?

  • @regieproa4202
    @regieproa4202 3 ปีที่แล้ว +1

    Sir meron din po ba pra sa sym or pwdi po ba yan sa sym bunos Sr 110 po motor ko sir? ..

  • @arjaybutron4683
    @arjaybutron4683 3 ปีที่แล้ว

    Boss tanong ko lang xrm 110 motor ko . Nagpakabit ako ng clutch kit . Bakit mag momoist ang oil sa motor sa may oil seal. At saan kinakabit ang O ring na kasama sa set? Salamat

  • @blackleeg4158
    @blackleeg4158 ปีที่แล้ว

    Boss ano po bang pwede na crank case or conversation kit para sa RUSI DELTA X 110 tatlo lng po kasi ung bolt nya sa taas ung sa wave po kasi apat!Pwede po ung sa XRM CONVERSATION KIT?nakita ko kasi na parang tatlo lng bolt nya sa taas baka yun pwede! Ano sa tingin mo boss? Pwede ba ung sa XRM? SANA PO MASAGOT

  • @elcazaesports68
    @elcazaesports68 3 ปีที่แล้ว +1

    Bagong subscriber lods🔥

  • @MrYeahboy204
    @MrYeahboy204 ปีที่แล้ว

    dol ?... ganyan din sa akin naka cluctch convert .. ang tanong ko dol .. yung sa akin hindi na ma kick start sa akin .. at tsaka hindi na ma free will pag naka permera akoh at kinomot ko yun clutch ... saan yung sira dol ?..

  • @JoelVanz
    @JoelVanz ปีที่แล้ว

    Magkano po magagastos sa clutch convertion sa inyong estimate at labor

  • @DharwinMayogba
    @DharwinMayogba ปีที่แล้ว

    Gandang gabi po kuya

  • @nhatz69
    @nhatz69 3 ปีที่แล้ว

    pano po pag sa mga Suzuki na motor like Smash pag gagawing fully manual tapos kit din po?

  • @justeenortega818
    @justeenortega818 3 ปีที่แล้ว +1

    Paps hindi ba naging maingay ang makina nang nag manual clutch?

  • @Ricadelarosa-c2j
    @Ricadelarosa-c2j 2 ปีที่แล้ว

    salamat idol, kaso paano kapag nasira yung oil seal sa may cluch arm? paano yun? may kapareho ba yun na mabibili?

  • @sakuraelectores6652
    @sakuraelectores6652 3 ปีที่แล้ว +1

    Salamat sa advice mo boss thank po

  • @alecalec3235
    @alecalec3235 ปีที่แล้ว

    Pero Nyan limetid edition na xrm may balancer talaga tsaka Lima clutch ling factory stock hirap lang makahanap maganda sa parts nun pang convert gawang Honda talaga

  • @lathrellpolo
    @lathrellpolo ปีที่แล้ว

    paps anong sukat nung washer and yung allen screw na kinabit mo?

  • @nashryan8669
    @nashryan8669 3 ปีที่แล้ว

    Ang galing mo sir mag convert😊👏👏👏👏

  • @romeofernandodelacruz7606
    @romeofernandodelacruz7606 8 หลายเดือนก่อน

    kuya bakit po kaya mabilis mapudpud ung lining ko. Xrm RS 125 po ung motor ko naka convert ng clutch. Thankyouu po sa pag sagot .

  • @justinsanio5665
    @justinsanio5665 2 ปีที่แล้ว

    Boss may kwenta pa po ba yung primary clutch pag nakaclutch conversion?makakadagdag pa din ba sya sa takbo ng motor?

  • @erwingamboa6176
    @erwingamboa6176 2 หลายเดือนก่อน

    Wala naman po ba magiging negative result saakina oag nilagyan ng clutch

  • @boyetgajes9522
    @boyetgajes9522 4 หลายเดือนก่อน

    Sana idol uncut video mo para makita paano nakabit ung conversion mo

  • @criscesarsulla2851
    @criscesarsulla2851 ปีที่แล้ว

    Boss d Po ba Yan ma slide ? Good job po... Galing nyo po

  • @choiaguilar8190
    @choiaguilar8190 2 หลายเดือนก่อน

    tanggalin mo lang boss yang washer jan sa may primary goods na yan

  • @llevan3686
    @llevan3686 3 ปีที่แล้ว +1

    Solid paps 👍

  • @phoveus2497
    @phoveus2497 ปีที่แล้ว

    Ok pa ba ngayun yung motor mu boss good pa ba kung washer lang..hindi welding?

  • @aivenblake2118
    @aivenblake2118 2 ปีที่แล้ว

    Boss, anu po ba advantage kung may clutch yung motor? XRM 125 din po ang motor ko, matagal ko na din gusto na ipaconvert ko sa clutch.

  • @arnelpadullo3944
    @arnelpadullo3944 2 ปีที่แล้ว

    Inipit lang po diba ng spacer pra mwala an oneway??

  • @kayevincentaquino114
    @kayevincentaquino114 2 ปีที่แล้ว

    Ano po mas maganda, welding po ba o tornelyo lang?

  • @kyoskicernandez2304
    @kyoskicernandez2304 2 ปีที่แล้ว

    pano yung lagayan ng side mirror sa left side paps...

  • @ukuyuymakesyouhappy9273
    @ukuyuymakesyouhappy9273 3 ปีที่แล้ว

    Hindi kaba na overheat sa set up mo paps. Kasi di plug iang play ang kit

  • @zeffenciso598
    @zeffenciso598 3 ปีที่แล้ว

    Boss hindi mona binalik yung clutch shoe ba tawag don? Yung kung saan naka pwesto yung washer na nilagay mo

  • @roniljt
    @roniljt ปีที่แล้ว

    Okay lang po ba ipang daily ang clutch conversion kit ?

  • @sakuraelectores6652
    @sakuraelectores6652 3 ปีที่แล้ว

    Boss nag palit ako ng clutch coversion bat ma tigas ang clutch ayaw mag releas pag bina wasan ang spring sa clautch guma gana pa turo po boss ano problima

  • @NathanCutevlog
    @NathanCutevlog 3 ปีที่แล้ว

    Tamsak done, nice video paps very interesting

  • @jomargaleno705
    @jomargaleno705 3 ปีที่แล้ว

    Sir pwedi dn ba yan sa euro marvel 125 pareho dn ba sila ng pyesa na gagamitin sana ma replyan nyo bos salamat

  • @JovanieFrancisco-u4w
    @JovanieFrancisco-u4w หลายเดือนก่อน

    Papsss, kung i convert ko sa manual hindi ba mag iingany kung hindi kukunin ang clutch shoe? Pasagot naman

  • @myramagulod5336
    @myramagulod5336 3 ปีที่แล้ว

    Boss anu b problema ng sakin ganyan dn ginawa ko ok p nung una pero ngaun pg ng clutch ako smooth pero my time n hndi bumalik agad un kambyo .dti ok pa nmn

  • @blurredvision4067
    @blurredvision4067 2 ปีที่แล้ว

    Hi po sir nag coconvert din po ba kayo ng Honda wave dash po?

  • @anthonyyerro1026
    @anthonyyerro1026 ปีที่แล้ว

    Boss bat Yung sa wave 100 ko malagutok tinanggal naman na clutch weight nya

  • @rolandoblanco5265
    @rolandoblanco5265 ปีที่แล้ว

    sir, tanong lang nag convertion kit din ako kaso nag leak sa clutch arm...may mabibili ba na oil seal don? salamat

  • @ckanecuza5999
    @ckanecuza5999 3 ปีที่แล้ว +1

    boss. safe ba yn sa long ride clutch convertion?

  • @MVMQ010
    @MVMQ010 3 ปีที่แล้ว

    Nice job paps ..pwede mag tanong ..kapareho lang ba ng xrm 110 ang sukat ng clutch housing ng xrm 125 pwede kaya yang conversion kit na yan sa xrm 110?

  • @ivanpartusa6175
    @ivanpartusa6175 3 ปีที่แล้ว

    Tanong Lang boss pwede paba parehistro kahit na manual clutch na sya

  • @nidahabon5393
    @nidahabon5393 3 ปีที่แล้ว

    Boss pag nag change gear ka ba?malambot ba yung shifter at iisa lang ba?

  • @leurpadson7538
    @leurpadson7538 ปีที่แล้ว

    Ka paps anu size nung washer at san mo nabili.thanks

  • @johnrockmotovlog
    @johnrockmotovlog 2 ปีที่แล้ว

    Boss anu ba yong ne replace mo sa clutch lever mo? Ang ganda.

    • @fpsph4446
      @fpsph4446 2 ปีที่แล้ว

      Hydraulic yan paps

  • @bukidislife598
    @bukidislife598 3 ปีที่แล้ว

    Paps kumusta ang performance ng conversion? Wala bang ingay ng makina??

  • @putchsulbiano8342
    @putchsulbiano8342 3 ปีที่แล้ว

    Galing mo boss..magkano lahat gastos boss Pag convert manual clutch

  • @renatodelacruz5893
    @renatodelacruz5893 2 ปีที่แล้ว

    Bakit wala kang reply sa mga tanong,kc meron din ako tanong set na ba ung convertion kit na bibilin pag namili,thanks RS

  • @aaronmarcdeguzman5469
    @aaronmarcdeguzman5469 2 ปีที่แล้ว

    LTO Legal Po ba if mag Lagay ng clutch?? Pwede Po ba sya ma rehistro??

  • @coffecup5859
    @coffecup5859 2 ปีที่แล้ว

    boss san po shop nyo.. baka pwede ko ipa convert yung wave 110r ko

  • @gabrielselen8924
    @gabrielselen8924 ปีที่แล้ว

    paps pwede bang di na ibalik yung pin sa bomba ng langis

  • @roquegunday6330
    @roquegunday6330 9 หลายเดือนก่อน

    Bos morning saan po Ang venue ninyu mag pagawa sana Ako smash gaweng Kong manual San po adres NYU salamat

  • @bayvlogstv8985
    @bayvlogstv8985 3 ปีที่แล้ว

    ikakabit ba ulit yung tinanggal mong may spring sa primary clutch

    • @motocarldiy
      @motocarldiy  3 ปีที่แล้ว

      yes kabit mo ulit un para balance yung sigunyal

  • @jovelleedison5243
    @jovelleedison5243 9 หลายเดือนก่อน

    IDOL SANA MA PANSIN ! . BAKIT NAG KAKA LAGATIK OR LAGATOK . SINCE NAG CONVERT DIN AKO WAVE 125 USER HERE!!!

  • @choyriders2080
    @choyriders2080 3 ปีที่แล้ว

    Ano po size ng special tools or castle nut removal tools

  • @jomarbaya7614
    @jomarbaya7614 2 ปีที่แล้ว

    Boss Sana ma pansin ..natural lang ba Yan boss yang may ngaw2 na tunog pag Bintawan mo unti2 Ang Ang clutch?

  • @snkr_em
    @snkr_em 3 ปีที่แล้ว

    Anung size ung oil seal sa may kick start nya

  • @bersonvlogs8907
    @bersonvlogs8907 2 ปีที่แล้ว

    normal poba na medjo magbabago tunog ng makina hindi na kasing pino ng stock?

  • @raymondparreno4717
    @raymondparreno4717 3 ปีที่แล้ว

    Paps magkanu aabutin paps kong palagyad ko ng clutch yong motor ko na 110cc at saan loc mo paps

  • @nadnadmiranda5919
    @nadnadmiranda5919 ปีที่แล้ว

    Sir binalik mo ba secondary clutch

  • @francerangeloleray4418
    @francerangeloleray4418 3 ปีที่แล้ว

    Boss, yung sa akin pag tumatakbo motor ko parang mai nag wiwistle, normal lang po ba yan or hinde?

  • @zeharitempla9577
    @zeharitempla9577 ปีที่แล้ว

    kung hindi marunung mgtiming s clutch hnd mo mapapatakbo ang motor mamamatay sya mas safety..👍

  • @arjaycamingawan4293
    @arjaycamingawan4293 3 ปีที่แล้ว

    Paps may video Karin ba paano kinabit ang latest cowling?

    • @motocarldiy
      @motocarldiy  3 ปีที่แล้ว

      plug and play lng

    • @arjaycamingawan4293
      @arjaycamingawan4293 3 ปีที่แล้ว

      Walang Ginawang diskarte sa speedo meter na bracket paps?

  • @glenndimaculangan6548
    @glenndimaculangan6548 ปีที่แล้ว

    saang area po kayo at magkano ang pa convert?

  • @khimdonaire8207
    @khimdonaire8207 2 ปีที่แล้ว +2

    Paps kahit di na lagyan ng washer. Kahit tanggalin nalang yung washer sa loob ng gear ng clutch housing na nag sisilbing spacer ng clucth shoe para di mag one way.

    • @boyetlaggui5960
      @boyetlaggui5960 ปีที่แล้ว

      Walang washer sa loob ng 125...ung wave100 at xrm110 ang meron

  • @judepatlingraovlog5967
    @judepatlingraovlog5967 3 ปีที่แล้ว +1

    Ok talaga bos..ganda pa ng aso mo boss..

  • @cocorichard7011
    @cocorichard7011 3 ปีที่แล้ว

    Perfct bro..subs ako..rs...

  • @arielmaglalang5625
    @arielmaglalang5625 3 ปีที่แล้ว +1

    Mas malambot ba pisilin clutch paps pag nka hydrolic clutch? Saka iwas putol ba? Thanks

    • @nuclearwinter21
      @nuclearwinter21 ปีที่แล้ว

      Wala pong napuputol sa hydraulic clutch katulad ng sa hydraulic brakes. Magkaka-tagas lang kapag napabayaan.

  • @ReneCastro-co4vu
    @ReneCastro-co4vu ปีที่แล้ว

    Pwd pa yan dogtong swing yung clutch para lumambot khit maiiksi tapus bolt 😅😅😅pag ganyan direct medyo matigas yan sya kunti 😅😅😅

    • @motocarldiy
      @motocarldiy  ปีที่แล้ว

      honga paps. medyo matigas dapat tlga mahaba para may leverage lumambot.👍

  • @happie88
    @happie88 3 ปีที่แล้ว

    magkno po gastos pag papaconvert sa Manual ung Xrm125

  • @edtrixdalit8320
    @edtrixdalit8320 3 ปีที่แล้ว

    Paps ,Ok lang rin po ba sa Xrm 2021 Model magdag dag ng clutch ?🤣

  • @drixcelmonteron3938
    @drixcelmonteron3938 3 ปีที่แล้ว

    Magkano po ba pag bumili ng crankcase pariho po tayo ng motor

  • @xenonpalermo2461
    @xenonpalermo2461 2 ปีที่แล้ว +1

    may huli ba ang manual conversion sa LTO paps?

    • @lastcard6323
      @lastcard6323 ปีที่แล้ว

      Tingin ko wla kasi meron tlga pang convertion bumili ako ng xrm 125 nag taka ako bkt may cluth lever na lalagyan at may mga honda genuine clutch kit din
      Ibig sabihin may design cya pang manual at semi manual

  • @findingken
    @findingken 3 ปีที่แล้ว

    Ano pong ginamit pang tabas?

  • @ShopeePlayCFPH
    @ShopeePlayCFPH 3 ปีที่แล้ว

    idol bat saken umingay yung makina ano kaya problema nagconvert den ako clutch 🙁