Great video. My 2011 Honda PCX is at 50,000 miles and it's driver belt finally snapped. This is what I need to do! Honda scooters are the best! They last really long. Thank you for the video!!!
@@pilyomotoride7781 Around 50k surprisingly. I never changed it. it was stock as well but I wish I did change it earlier!! it snapped while I was on the road. it was very dangerous I recall since the vehicles (cars) behind me were not aware why I quickly dropped speeds without warning. I could have been hit from behind if the cars behind me were going too fast! luckily nothing happened.
@@lul123 The FACTORY BALLS IS 16 grams I have 23 grams FOR TRIS REASONS 1 ENGINE WORKS WITH LITTLE TURNS IS THE MOST ECONOMY THIRD WORD IS A BELT withstand MOST CITY BECAUSE OF 16 grams The BELT can turn 3 MILLION TIMES IN VARIANTOR while 23 grams BURNER 1.6 WITH 1.9 MILLION ALSO AND SOMETHING RESISTANT MADE WITH THE OIL. I DO NOT RECOMMEND BECAUSE ON UPHILL WITH 2 PEOPLE THEY WILL NOT DRINK AT ALL, YOU WILL ALSO FORCE NOT TO START.
![[ TEASER ] เงาะป่า - วงL.กฮ. | TMG RECORD](http://i.ytimg.com/vi/M4ObdFfcPww/mqdefault.jpg)
HI What is the adjustable fork tool that holds clutch in place as you tighten bolt with torque wrench please?
Hi salmon if you go to my older videos you will find how I made it myself I made it it's nothing it's the simplest thing.
Papz pwedi ba belt nang pcx at adv 150 sa click
Great video. My 2011 Honda PCX is at 50,000 miles and it's driver belt finally snapped. This is what I need to do! Honda scooters are the best! They last really long. Thank you for the video!!!
Thank you very much!!!
How many miles before the belt snapped?
@@pilyomotoride7781 Around 50k surprisingly. I never changed it. it was stock as well but I wish I did change it earlier!! it snapped while I was on the road. it was very dangerous I recall since the vehicles (cars) behind me were not aware why I quickly dropped speeds without warning. I could have been hit from behind if the cars behind me were going too fast! luckily nothing happened.
Didn't you need to replace the rollers???
let it never change
Only if they hsve obvious wear or flat spots
@@barneyrubble4827 Well they would..
Güzel video kanka
Ok
Good video, I like the special tool you use.
hi Gavin Thank you very much!!!
Can you please tell me the name of the tool you use to block it to unscrew?
This?th-cam.com/video/YmAK1D2z_mg/w-d-xo.html
I've just used an Impact wrench without need to use any additional tool
is there 2023 ver of this
Yes Exists.
Nice video! In a case like this I'd prefer to use a torque wrench.
Thank you for your kind words !!! most cities use an air lock. I have a good weight gain when I pull a screw
When should you change ?
Hi Every 20,000 km.
15000 miles according to Honda
پس تو اون کلمه ها دنبال عدد 4 بگردم.ممنون
How did you ut discbrake rear ?
I show it in a video in a little while I will make another video to show more clearly with double jaws
Good brother
Thanks bro!!!
how much km did the belt last?
Hi lul I change the belt every 30,000 to 32,000 kilometers because my balls are 23 grams each. you normally change Every 18000 to 20,000 kilometers.
@@MBPATENTS interesting, how much does stock balls weight (defaults ones when you buy the scooter)? you put heavier than stock? what effect it had?
@@lul123 The FACTORY BALLS IS 16 grams I have 23 grams FOR TRIS REASONS 1 ENGINE WORKS WITH LITTLE TURNS IS THE MOST ECONOMY THIRD WORD IS A BELT withstand MOST CITY BECAUSE OF 16 grams The BELT can turn 3 MILLION TIMES IN VARIANTOR while 23 grams BURNER 1.6 WITH 1.9 MILLION ALSO AND SOMETHING RESISTANT MADE WITH THE OIL. I DO NOT RECOMMEND BECAUSE ON UPHILL WITH 2 PEOPLE THEY WILL NOT DRINK AT ALL, YOU WILL ALSO FORCE NOT TO START.
Did you used original rollers 15 or anything lighter?
My rollers are 26 gramms
Get a malossi variator kit. Then use 13gram rollers with uprated clutch springs
@@JDMz did and i saw 10miles difrent not much.