Exactly the system I've been using for the past 4 years now, LOVE IT! Added bigger tires to my Tacoma an needed a good refresher video on how to do this. GREAT JOB explaining it all, thanks for posting!
Thank you for the feedback! Check out the following link for more information on the Fastway e2 Weight Distribution System. www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html
Thank you for the feedback! We are happy to help! Check out the following link to see this kit on our website. www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0800.html
Great system but I use the chain style o my car trailer because weights are always different depending on whether it's a car truck tractor etc. Chains are easier to adjust for varing loads
For the L brackets that fit on the trailer tongue the installer in the video mentions there might be a need to later adjust the height/position by moving it to alternate holes in the bracket. To me doesn’t provide an explanation of the final desired position of the L bracket. Can the installer or someone comment on what precise determination of L bracket height on frame. Thanks
Great video. I have the same e2 system but upgraded from a Ram 1500 to 2500. Sounds like I am also going to have to get a drop shank to lower the ball. We are towing a Lance 1985. The dry tongue weight is roughly 660
We offer several different weight distribution shanks (see link) which have the standard height adjustment hole spacing. Just choose the shank with the drop you need... www.etrailer.com/dept-pg-Accessories_and_Parts-sf-Weight_Distribution_Hitch-pt-Shanks-pc-Fits_2_Inch_Hitch.aspx
We are happy to help! Check out the following link for more information on this Fastway e2 Weight Distribution System. www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html
The Equal-i-zer is a very popular weight distribution kit. With that being said, those who have the Fastway system love how it performs with their trailer. It is just going to depend on what trailer and tow vehicle set up you have. www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html www.etrailer.com/Weight-Distribution-Hitch/Equal-i-zer/EQ37141ET.html
you mentioned why the e4 equalizer is better option for certain applications. i could not hear did you say if the trailer has a lot of pin weight? if so what does that mean and if not please explain what applications are better for the equalizer thanks.
The pin weight will obviously be different on different trailers. The weight distribution system is designed to make hauling a camper a bit more enjoyable because of how the bars will take some of the tongue weight of the camper and reduce the sway. www.etrailer.com/dept-pg-Weight_Distribution_Hitch-pm-Equal~i~zer.aspx
You may have too much pressure on the bars. This is usually why you will get grinding and wear. www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html
I have an e2 round bar. I just bought it and had it installed professionally. The brackets themselves after one tow, they seem a little bit crooked. I have been told that this will not affect the towing capability and will not affect the weight distribution. Is this correct? 18:2718:28
I'm not sure what you mean by 'crooked'. If the brackets have moved, I'd recommend taking your trailer back to who installed the system and have them correct the positioning of the brackets.
Because of the metal on metal friction that's used to resist trailer sway, some noise is normal. You can check out the install instructions so you can revisit the install/setup. I've linked those below for you. www.etrailer.com/instructions.aspx?pn=FA92-00-0600 www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0600.html
The # FA92-02-4100 shank is used. You can check it out by clicking this link: www.etrailer.com/Accessories-and-Parts/Fastway/FA92-02-4100.html www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0600.html
When you measured the distance from ground to top of wheel well, the table says, "tow vehicle loaded for trip." Does that mean with four passengers and their carry-on gear as well? Do you have to get everyone in the cab of the truck and have a 3rd party person take the measurement?
loading the gear in the bed of the truck or rear of the car is more important but the people in the vehicle will make a difference in the sag of the rear end of the vehicle. You will be fine to set the weight distribution up with just the luggage loaded in the rear of the vehicle. www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html
No mention of the dual-cam system? The dual-cam is the best, hands down, because it's the only one that can 'center' itself. This E-2 and Equalizer may be 'good' or even 'better', but the Reese DUAL-CAM is 'best!'
Assuming you're speaking of the Fastway # FA92-00-0450, you'll need a 2 inch trailer ball with a 1 inch diameter shank like # 40038. www.etrailer.com/Trailer-Hitch-Ball/CURT/40038.html www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html
Explain please.....if the weight distribution is "off" you add or remove washers, not adjust the brackets on the trailer frame? And: Top of my coupler is only 16" off the ground. Truck receiver 18". Too much of a drop will make the shank and hitch assembly drag on the ground at campgrounds. Only option is to have less drop which would mean slight trailer rise in the front. How much of a rise is safe?
You just want to be sure that you do not have too much tilt in the front of the trailer. 2' is not the worst difference in height. Some squat will take away some of the height difference but you will want to haul the trailer as level as possible. www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html
I apologize if I missed it but why do all these type of WDH's require the ball to be sloped backward a little? What is the purpose for not having them perfectly straight up and down? How would I know how far to tilt mine?
The ball being tilted is because the system's head is tilted to adjust the amount of tension on the spring bars. If you check out on installing a WD hitch here www.etrailer.com/faq-how-to-install-weight-distribution.aspx Go to Step 4 about installing and adjusting the head.
You can get a weight distribution set up for the rental trailers. It would just be a lot of work to set up each time and you don't know for sure that the weights will be the same each time. I would check with the rental company and see if they offer trailers with the weight distribution on the trailer.
@@etrailer I am renting out trailers and I provide the hitch. And I wondering if it would be wise to offer a weight distribution hitch or just go with a ball hitch with a friction sway bar.
The truck needed the extra drop because of the height of the hitch. Typically, people are not going extreme off roading while pulling a camper. Yes, this kit allows you to back up. www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html
We have found that the Chain Hangers for Reese Weight Distribution Systems is the best option when it comes to installing a weight distribution system on a v-nose trailer. www.etrailer.com/Weight-Distribution-Hitch/Reese/RP67509.html www.etrailer.com/Accessories-and-Parts/Reese/RP58305.html
"tongue weight = anything we have behind our rear axle." Meaning any cargo loaded behind the rear axle, or the weight of the vehicle components and cargo behind the rear axle? I can imagine weighing gear as we load it, if it's placed behind the rear wheels. I can't imagine figuring out how to slice the vehicle weight by location (like the portion that's behind the rear axle only).
The best way to figure out the weight of everything behind the axle in the truck is to weigh it and add it to the tongue weight from the trailer. www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html
That will depend on the weight of your trailer. You want the total weight of your trailer to be as close to the weight on the weight distribution hitch without going over. If you go over, you run the risk of damaging the kit and it not working properly. www.etrailer.com/dept-pg-Weight_Distribution_Hitch-pm-Fastway.aspx
Do you know the exact shank length of that hitch ball? You mention it being an Equalizer brand, 2-5/16” ball with a 1-1/4” shank diameter, and you say the length is perfect...but you dont ever actually state the exact length. Thanks in advance!
You mentioned that there is a friction "material" on the bottom of the bar and the bracket. I bought this system and it doesn't have anything between...it's metal on metal. 1 tow and it already rubbed about 1/16" off of the bar. Seems like I'm a couple years, we will need new bars and maybe new brackets too. Wish I didn't buy it now.
The brackets should have come with the friction material preinstalled from factory. www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html
@@etrailer Yes, I see it pictured on your website but it's not on my brackets. So who do we call? Dealer where we purchased it at delivery of our camper or Fastway? It's the 10k setup, if there was a change in the product line.
The installation instructions, which can be found linked to the product page below, call for raising your trailer jack high enough that the spring arms swing away. So basically you use your trailer jack to release the tension you were talking about so you can safely remove the arms. www.etrailer.com/p-FA92-00-0450.html
@@szinski correct. What I do is use a couple of the leveling pads under the rear tires of our Expedition. This way, I'm not using as much of the jack to hold up all that weight and stress on the locking mechanism for the ball. It helps especially when the ground is lower for the camper than the tow vehicle, which is how my storage spot lines up unfortunately. With blocks under the jack, it's fairly high to get the WD bars off easily. I had to be this high on the hitch for our camper that is framed high and to get keep it level while also getting the Expedition as close to level. I must have taken it all apart 3-4 times to get it right while loaded up.
It's not difficult, remove the tension from the bars by lifting them up off the brackets on the trailer frame. Then, remove the cotter pins and slide pins that hold the spring bars to the weight distribution head. It's the reverse of the procedure shown in the install instructions liked below: www.etrailer.com/instructions.aspx?pn=FA92-00-0450
Exactly the system I've been using for the past 4 years now, LOVE IT! Added bigger tires to my Tacoma an needed a good refresher video on how to do this. GREAT JOB explaining it all, thanks for posting!
BEST INSTRUCTION VIDEO ON TH-cam EVER!
Thank you for the feedback! Check out the following link for more information on the Fastway e2 Weight Distribution System.
www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html
Great explanation. I’m new to towing travel trailer. This video was very helpful! Thank you
Thank you for the feedback! We are happy to help! Check out the following link to see this kit on our website.
www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0800.html
Great system but I use the chain style o my car trailer because weights are always different depending on whether it's a car truck tractor etc. Chains are easier to adjust for varing loads
Excellent video!
For the L brackets that fit on the trailer tongue the installer in the video mentions there might be a need to later adjust the height/position by moving it to alternate holes in the bracket. To me doesn’t provide an explanation of the final desired position of the L bracket. Can the installer or someone comment on what precise determination of L bracket height on frame. Thanks
Great video. I have the same e2 system but upgraded from a Ram 1500 to 2500. Sounds like I am also going to have to get a drop shank to lower the ball. We are towing a Lance 1985. The dry tongue weight is roughly 660
We offer several different weight distribution shanks (see link) which have the standard height adjustment hole spacing. Just choose the shank with the drop you need...
www.etrailer.com/dept-pg-Accessories_and_Parts-sf-Weight_Distribution_Hitch-pt-Shanks-pc-Fits_2_Inch_Hitch.aspx
@@etrailer Thanks for your response. Much appreciated.
You're very welcome, we're glad we could help!
Great video!! Thank you.
We are happy to help! Check out the following link for more information on this Fastway e2 Weight Distribution System.
www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html
If money wasn't a factor, would you choose the Equal-i-zer over the e2?
The Equal-i-zer is a very popular weight distribution kit. With that being said, those who have the Fastway system love how it performs with their trailer. It is just going to depend on what trailer and tow vehicle set up you have.
www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html
www.etrailer.com/Weight-Distribution-Hitch/Equal-i-zer/EQ37141ET.html
you mentioned why the e4 equalizer is better option for certain applications. i could not hear did you say if the trailer has a lot of pin weight? if so what does that mean and if not please explain what applications are better for the equalizer thanks.
The pin weight will obviously be different on different trailers. The weight distribution system is designed to make hauling a camper a bit more enjoyable because of how the bars will take some of the tongue weight of the camper and reduce the sway.
www.etrailer.com/dept-pg-Weight_Distribution_Hitch-pm-Equal~i~zer.aspx
Thanks for the video! We have a new loud grinding noise on our E2 hitch and the sway bars are getting rubbed more. Any suggestions?
You may have too much pressure on the bars. This is usually why you will get grinding and wear.
www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html
I have an e2 round bar. I just bought it and had it installed professionally. The brackets themselves after one tow, they seem a little bit crooked. I have been told that this will not affect the towing capability and will not affect the weight distribution. Is this correct? 18:27 18:28
I'm not sure what you mean by 'crooked'. If the brackets have moved, I'd recommend taking your trailer back to who installed the system and have them correct the positioning of the brackets.
I need to check mine in the spring. I don't think the dealer installed it properly. It makes way too much noise, according to me.
Because of the metal on metal friction that's used to resist trailer sway, some noise is normal. You can check out the install instructions so you can revisit the install/setup. I've linked those below for you.
www.etrailer.com/instructions.aspx?pn=FA92-00-0600
www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0600.html
What size shank was used for the 2500 . I reckon it would be the same for a f250
The # FA92-02-4100 shank is used. You can check it out by clicking this link:
www.etrailer.com/Accessories-and-Parts/Fastway/FA92-02-4100.html
www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0600.html
When you measured the distance from ground to top of wheel well, the table says, "tow vehicle loaded for trip." Does that mean with four passengers and their carry-on gear as well? Do you have to get everyone in the cab of the truck and have a 3rd party person take the measurement?
loading the gear in the bed of the truck or rear of the car is more important but the people in the vehicle will make a difference in the sag of the rear end of the vehicle. You will be fine to set the weight distribution up with just the luggage loaded in the rear of the vehicle.
www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html
No mention of the dual-cam system? The dual-cam is the best, hands down, because it's the only one that can 'center' itself. This E-2 and Equalizer may be 'good' or even 'better', but the Reese DUAL-CAM is 'best!'
My camper takes a 2 inch ball, can I change the ball size
Assuming you're speaking of the Fastway # FA92-00-0450, you'll need a 2 inch trailer ball with a 1 inch diameter shank like # 40038.
www.etrailer.com/Trailer-Hitch-Ball/CURT/40038.html
www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html
Explain please.....if the weight distribution is "off" you add or remove washers, not adjust the brackets on the trailer frame?
And: Top of my coupler is only 16" off the ground. Truck receiver 18". Too much of a drop will make the shank and hitch assembly drag on the ground at campgrounds. Only option is to have less drop which would mean slight trailer rise in the front. How much of a rise is safe?
You just want to be sure that you do not have too much tilt in the front of the trailer. 2' is not the worst difference in height. Some squat will take away some of the height difference but you will want to haul the trailer as level as possible.
www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html
What about backing up they say this with this system it can be done?
This weight distribution set up does allow you to back up with it attached.
www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html
What is the part number for that shank, just upgraded to a 2500 and need a longer one. Thanks.
I have provided a link to the longer drop shank that was used in this video.
www.etrailer.com/Accessories-and-Parts/Equal-i-zer/EQ90-02-4400.html
I apologize if I missed it but why do all these type of WDH's require the ball to be sloped backward a little? What is the purpose for not having them perfectly straight up and down? How would I know how far to tilt mine?
The ball being tilted is because the system's head is tilted to adjust the amount of tension on the spring bars. If you check out on installing a WD hitch here www.etrailer.com/faq-how-to-install-weight-distribution.aspx Go to Step 4 about installing and adjusting the head.
if the tow vehicle is different every time for a rental trailer, would the Weight Distribution hitch be a good idea?
You can get a weight distribution set up for the rental trailers. It would just be a lot of work to set up each time and you don't know for sure that the weights will be the same each time. I would check with the rental company and see if they offer trailers with the weight distribution on the trailer.
@@etrailer I am renting out trailers and I provide the hitch. And I wondering if it would be wise to offer a weight distribution hitch or just go with a ball hitch with a friction sway bar.
Why does the hitch look so low to the ground where it goes into the reciever. What if you are off road. You can back up with this?
The truck needed the extra drop because of the height of the hitch. Typically, people are not going extreme off roading while pulling a camper. Yes, this kit allows you to back up.
www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html
Will that work on a travel trailer with a v nose?
We have found that the Chain Hangers for Reese Weight Distribution Systems is the best option when it comes to installing a weight distribution system on a v-nose trailer.
www.etrailer.com/Weight-Distribution-Hitch/Reese/RP67509.html
www.etrailer.com/Accessories-and-Parts/Reese/RP58305.html
"tongue weight = anything we have behind our rear axle." Meaning any cargo loaded behind the rear axle, or the weight of the vehicle components and cargo behind the rear axle? I can imagine weighing gear as we load it, if it's placed behind the rear wheels. I can't imagine figuring out how to slice the vehicle weight by location (like the portion that's behind the rear axle only).
The best way to figure out the weight of everything behind the axle in the truck is to weigh it and add it to the tongue weight from the trailer.
www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html
How do you know wether to get a 6000 or an 8000 model?
That will depend on the weight of your trailer. You want the total weight of your trailer to be as close to the weight on the weight distribution hitch without going over. If you go over, you run the risk of damaging the kit and it not working properly.
www.etrailer.com/dept-pg-Weight_Distribution_Hitch-pm-Fastway.aspx
I was at camping world today and they ran out of 8K and everything added up is 7500 so they sold me a 10K is that going to be an issue? @@etrailer
Do you know the exact shank length of that hitch ball? You mention it being an Equalizer brand, 2-5/16” ball with a 1-1/4” shank diameter, and you say the length is perfect...but you dont ever actually state the exact length. Thanks in advance!
You mentioned that there is a friction "material" on the bottom of the bar and the bracket. I bought this system and it doesn't have anything between...it's metal on metal. 1 tow and it already rubbed about 1/16" off of the bar. Seems like I'm a couple years, we will need new bars and maybe new brackets too. Wish I didn't buy it now.
The brackets should have come with the friction material preinstalled from factory.
www.etrailer.com/Weight-Distribution-Hitch/Fastway/FA92-00-0450.html
@@etrailer Yes, I see it pictured on your website but it's not on my brackets. So who do we call? Dealer where we purchased it at delivery of our camper or Fastway? It's the 10k setup, if there was a change in the product line.
You used a tool to pry the bars into position. How do you take them off? I can picture that bar flying at me after it drops off the support.
The installation instructions, which can be found linked to the product page below, call for raising your trailer jack high enough that the spring arms swing away. So basically you use your trailer jack to release the tension you were talking about so you can safely remove the arms.
www.etrailer.com/p-FA92-00-0450.html
@@etrailer So that means you could raise it up to the same height when installing too? Then you wouldn't need the tool?
@@szinski correct. What I do is use a couple of the leveling pads under the rear tires of our Expedition. This way, I'm not using as much of the jack to hold up all that weight and stress on the locking mechanism for the ball. It helps especially when the ground is lower for the camper than the tow vehicle, which is how my storage spot lines up unfortunately. With blocks under the jack, it's fairly high to get the WD bars off easily. I had to be this high on the hitch for our camper that is framed high and to get keep it level while also getting the Expedition as close to level. I must have taken it all apart 3-4 times to get it right while loaded up.
Now take the bars off.
It's not difficult, remove the tension from the bars by lifting them up off the brackets on the trailer frame. Then, remove the cotter pins and slide pins that hold the spring bars to the weight distribution head. It's the reverse of the procedure shown in the install instructions liked below:
www.etrailer.com/instructions.aspx?pn=FA92-00-0450