This code is really working, I managed to edit it so that it can work in a loop with an input of a push button, it definitely does work. You can use SIM800L in replacement with the gsm module that he has used. Thank you to the video creator, you saved us in our project design
@@apurvwaghmare5974 apparently here in the Philippines, it is not allowed to send coordinates via text message. It is automatically blocked by the provider
How com GSMM doesn't have .listen( ) function? Does GSMM.begin( ) automatically stop GSP and start GSMM.listen()? Also this code is in the setup, so it works only once at the beginning. If I need to use it in the loop, both GPS and GSM needs to take turn to use listen() function?
Hey Thankyou soo much the project is working. But i needed to know if there is any way i can send the message to phone when certain condition is met instead of pressing the reset button manually.
hi, i am using the code, but my phone are not receive any sms and arduino ide there showed "the selected serial port does not exist or your board is not connected"
It's the serial port error check properly if you have selected the same port on which Arduino is connected.it has nothing to do with the code it's just port error
This code is really working, I managed to edit it so that it can work in a loop with an input of a push button, it definitely does work. You can use SIM800L in replacement with the gsm module that he has used. Thank you to the video creator, you saved us in our project design
@ryandanieldagoc2962 did you receive the location on you mobile phone?
@@deekshitham1643 im from the Philippines, we used a 4g sim card, we even tried using 5g
@@apurvwaghmare5974 apparently here in the Philippines, it is not allowed to send coordinates via text message. It is automatically blocked by the provider
how do u change the option, i mean without press the reset key, and set a request sms ? do u know how ?
Can i get code without using LCD i am using Arduino nano and sim900a gsm message is not get mobile what command i need to right
How com GSMM doesn't have .listen( ) function?
Does GSMM.begin( ) automatically stop GSP and start GSMM.listen()?
Also this code is in the setup, so it works only once at the beginning.
If I need to use it in the loop, both GPS and GSM needs to take turn to use listen() function?
what about without led
Interesting . Will definitely try this .
yes sure
which gsm must we use?
Can we use sim 900a gsm module
Yes
Can i know about the devices, which gsm are you used? Pls ans quickly
Still not replied! Unsubscribed
I reseved message but it shows lattitude and longitude as 0.000000
Anyone knows which gcm is he used?
it is still working without lcd?
how can i request a text message without reset arduino ?
Im not receiving the msg what sim should I use
Hey Thankyou soo much the project is working. But i needed to know if there is any way i can send the message to phone when certain condition is met instead of pressing the reset button manually.
yes you can
Hey have you used the same GSM 800 C module or any other ?
How to do it inside loop with certain condition
Im getting longitude and latitude in lcd but not in msg
hi, i am using the code, but my phone are not receive any sms and arduino ide there showed "the selected serial port
does not exist or your board is not connected"
It's the serial port error check properly if you have selected the same port on which Arduino is connected.it has nothing to do with the code it's just port error
hipiti hopiti your code is now my property kiddo
oooooooooooooooohhhhh pel diya
if I no use lcd, can it working?
Yes obviously it will work lcd is only for display purpose there any ways you can see the output like on serial monitor etc.
@@TechTooB2 so i need change any code?
Finally it's working
You followed the video exactly?
I am unable to recieve msg
THANKS LOT .
Please provide code once again it does not open