This video along with your battery replacement video were very helpful. I just finished replacing the battery, screen and power supply for Surface Go 3 and this video along with your commentary were very, very helpful. Thank you.
My Microsoft Surface GO 2 device turns off and on automatically when I work with it for a while, especially if I work with it while it is connected to the charger, or if its temperature increases, or if I press a little forcefully on its screen. I would like to know where the problem comes from. Thanks in advance
Hello, I never did any kind of repair like thos but cant afford to spend 250 + on battery and another 250 on screen replacement by a specialized tecnician... If I do step by step the same you did at the video I should be ok no? I ask because on reddit its full of people saying "its easy to go very wrong even for professionals"... Thanks
@@Dobrufusnoretro if you are replacing the screen, you do not have to worry about the screen. So the damage will be minimal. But if you are only replacing the screen, then screen needs to remove without a damage. So the risk is high at that time. Make sure to clean the frame after removing the broken screen
This video along with your battery replacement video were very helpful. I just finished replacing the battery, screen and power supply for Surface Go 3 and this video along with your commentary were very, very helpful. Thank you.
thank you for the video! I did it! only one question, what kind of glue, do you use?
B7000 / t7000
Link for replacement screen?
thank you very much
You're welcome!! Share and Support us. Thanks
My Microsoft Surface GO 2 device turns off and on automatically when I work with it for a while, especially if I work with it while it is connected to the charger, or if its temperature increases, or if I press a little forcefully on its screen. I would like to know where the problem comes from. Thanks in advance
Seems like an issue with the battery, but if not needs to check the board.
Hello, I never did any kind of repair like thos but cant afford to spend 250 + on battery and another 250 on screen replacement by a specialized tecnician...
If I do step by step the same you did at the video I should be ok no?
I ask because on reddit its full of people saying "its easy to go very wrong even for professionals"...
Thanks
are you trying to replace the battery or screen?
@@DIYGeardo screen at first (battery in future not now)
@@Dobrufusnoretro if you are replacing the screen, you do not have to worry about the screen. So the damage will be minimal. But if you are only replacing the screen, then screen needs to remove without a damage. So the risk is high at that time. Make sure to clean the frame after removing the broken screen
I replaced my screen, but it flashes once and then screen goes dark. Any idea why?
Can you help me I installed a new screen but touch isn’t working
Please check the flex cables and also double check connector plugs. If all ok then try with a new screen.
🙂👍🇹🇷
nnnnnnNEXT
Thanks for your feedback..