ฝัง
- เผยแพร่เมื่อ 19 ต.ค. 2024
- Installing the Rokform Pro Series Perch Mount. Cold outside and no heat in the garage. Good thing it was an easy install.
When I pulled the bike cover back one of the Custom Dynamic lenses fell out. Looks like the tabs are broken.
Thank you for checking out my channel. Please Like and Subscribe!
#supportmvc #harleydavidson #rokform
Mail/Sticker Swap
NVA Rider
PO Box 856
Greenville, MI 48838
Check out My Instagram: / nvarider
www.buymeacoff...
Music: Epidemic Sound www.epidemicso...
heard some good things on the Rokform. I was lucky enough to get given a Quadlock and So happy with it
I've herd of these mount's and how well they work. Stopping at a light and checking my phone is not the most affective way of travel for myself. Great vid sir!
I have been happy with this brand so far. The only thing I might change is adding some thread lock or something to that adjustment screw. The way it is sitting right now I am wondering if the weight of my phone and vibrations will cause it to come loose. We'll see when I can get out riding again. Most times my phone sits in the saddlebag. I get a lot of messages from work somedays and that makes it easier to ignore. Haha Thanks for watching!
Looks pretty good, nice job!
We use the Quadlock here, both great products! ✌️
Thank you. 🤘🏻
Very nice and great job installing. Very handy to have mounted there in my opinion.
Thank you. Still needs to be adjusted but I think it will work pretty well there.
Waaait!! 20 degrees that good riding temperature!! If it was only in Celsius🤣🤣🤣🤣 That’s what you get there North V Army!!🤣🤣 Good stuff brother thanks for sharing!!
20 wouldn't be bad if there was no snow and ice on the roads. Haha. And I had heated gear.
Clean install man! When mine finally goes out I’ll have to upgrade to something like this.
Thank you. There are a ton out there. I've been happy with Rokform so far.
Yikes 😬. Good job brother. Yeah I’m sure they’ll mail you another one. Beautiful bike 👊✊👍
Thank you!
Great install. Great looking bike also ! -2 ouch to cold for me ! Stay warm & have good day.
Thank you! Too cold for me too. Haha. Just stayed inside with some hot coffee until it warmed up some. 😀
Great job with the install. Regarding the lens covers, I'm pretty sure CD will just mail you new ones if you call their customer service. Stay warm, Eric
That's what I am hoping. I haven't had them a year yet. Thank you for watching!
Appreciate the vid bud. Did you have any issues with it on throttle side? I have seen most mounted clutch side which logistically doesn’t make sense to me. I agree on throttle side btw
The only thing that has me worried on the throttle side is it spinning loose. I have it pretty tight with some thread lock. No issues yet. To me it makes more sense on that side because of where the USB wire is. Thank you for watching! 🤘🏻
Nice video sir do you experience with ram mounts and if so would recommend the Rockform over it?
I have not used a ram mount for my phone before. So far I have been happy with the Rokform. Holds the phone tight. I would say my only complaint is with the magnet in the phone case. It tends to pick up metal shavings from where i work.
@@NVARider cool thanks I think I will be switching soon thanks for helping me in my decision.
If you’ve still got that old one I’d love to get with you on that. I have the factory road glide bars
We are in the process of moving. I know it is around here somewhere. Let me find it and I will let you know.
Ohh man its trying to be a Bolt Bucket! parts falling off
You know, who would have thought that it's a tough decision to make when it comes to phone holders. I had a RAM Mount that I used for almost 3 years, until my phone fell out while on a ride, luckily I was able to stop it by holding it against my tank and put it back on, all while in motion, with one hand, (video to follow). I went with the Ciro3D, so let's see how this one goes. Go review. Stay warm
I looked at the Ciro ones but figured since I already had the case I would stick with what I had. We'll see how it goes when I can get out riding again. Thanks for watching!
@@NVARider no worries, be well.
So it doesn’t matter what side you put it on? I put mine on my clutch lever but found that it wasn’t long enough to put on the rubber piece. Is the front brake lever side long enough for the rubber piece?
This one doesn't have a rubber piece on it. It will work on either side. I put it on the right side because that is the compartment the USB connection is in.
I havent seen that mount before...It will be interesting to see what CD says, I think they will replace them.. Bad plastic maybe ?? 🙄🙄
I didn't get a chance to call them. Tomorrow for sure. Seems weird they both look bad. Guess I should check the rear ones too before calling.
@@NVARider Weird right ??
Does this have the vibration dampener? If not you may want tho look into it so you don't ruin your camera
This one does not. Is it an issue with all phones? I've only read about the problems with iPhones.
@@NVARider all phones, camera's are not solid anymore to get better pics the lens floats so it can be damaged
Im guessing you can put the perch mount on either side of the handlebars?
Yes.
They only thing I didn’t like about these was it’s 1/4 inch of threads inside… kinda scary…
I noticed that. Maybe I'll measure one and see about getting a longer screw.
-2°; I've been in -2°,; hopefully, never again.
Would been warmer is close the garage door
I thought about that. I don't have enough lights yet and it gets dark enough in there with the door closed to make the video really dark. Hoping to pick some lights up soon.
@@NVARider man I'll be looking for lights lol and heater
-2 NOOOOPE
🥶
I can’t even see. Bad camera angle.
Yep. I noticed that after getting all done with it. Always up for some constructive criticism. Thoughts on a better angle?