Motorcycle Engine Case Repair!
ฝัง
- เผยแพร่เมื่อ 11 เม.ย. 2020
- In this one we repair the clutch cable mount for a motorcycle. Cast aluminum is always a challenge, but if you know the steps, it's not so bad.
------------------------------------------------------------------------------------------------------------
Our Amazon Store: www.amazon.com/shop/morfabind...
My Welding Equipment
Everlast 255EXT Tig: amzn.to/2E9KOeV
Miller 211 Mig (New Ver): amzn.to/2X3PzOH
Optrel Panoramaxx 2.5 Helmet: amzn.to/2TVz5GB
Camera Equipment
Canon EOS M50 Mirrorless: amzn.to/2TO4U3W
GoPro HERO Session: amzn.to/2UWGcOX - ยานยนต์และพาหนะ
I can only wish others was as good as you. Thanks for sharing this information
Awesome work. Very happy to have seen your channel.
Hell yes! It’s Saturday! I think it’s time to learn how to finally weld! I can’t wait for today’s learn how to weld series video! Been waiting for this part for weeks now...let’s gooooooo!!!!!
Vid coming shortly
Nice work! Saving this case from being scrapped is awsome.
Great job fella , thanks for taking the time, stay lucky, stay safe! 😉🇬🇧
Sick video! thanks for the information dude! i wish i could do stuff like this. Like i said in my last comment i've just been practicing T joints and lap joints for the last year now every single day since i started teaching myself. So i have 0 confidence in doing any type of repair work for anyone let alone even moving past basic stuff. So these videos are awesome to watch. Thank you very much for everything you're showing us
I enjoyed watching that. Very good. Thanks for taking the time to put that video together. Excellent.
Nice job on the repair.
Mike
Nice work man!
Thanks for this! I need to build a screw boss in my case for a wr450f starter motor mount cause prior owner overtightened it and broke it. This was exactly what I needed to know!
I wish you could do the repair on the right side engine case on my electra glide. I know I could trust your craftsmanship. Your a good man with special skills
I like your approach of boiling out the junk with AC cleaning before attempting to build up the base. IMO AC TIG higher frequency cleaning action is a great tool for any non-virgin aluminum as a first pass treatment.
Hells yes that was amazing thank you.
Sickk! Weld video really helpful and technique just like watching your style I'm tryna start up my own fab shop once I get my ticket and do the same sorta thing as you as well as some other things I have planned.
Very nice work man, like it so much I subscribe. Thanks for sharing 👍👍👍👍👍
really cool man, nice work!
Couldn’t see you weld. And sped up made the frequency sound higher so no clue on your settings.
Like a surgeon!
Suuuuuper !!!!
Shame you caught the drill on the mating surface
bravo
Work looks great. Would be really interesting to be able to see or know what your TIG settings are - how much peddle - what filler rod and tungsten. Sounds like you might be up about 100 hertz - but not sure. How much cleaning action. Super difficult to tell when to start adding the filler wire as well. Skills are sick - would be awesome if you can show us a little more detail.
Will the below welder be able to do the same job? Sorry, cant paste a link into comments as it doesn't allow me to post:
Weldforce Welder MIG Stick TIG 160A Fitted With 10A 240V plug WF-160MST WF-06127
What kind of prep should I do for a dirt bike engine case. It has an 1/8" hole that needs to be filled with weld. It's on the inside of the case where all the oil and the transmission is. Besides cleaning it out what other steps to prep this cast aluminum case would you recommend?
What welder were you using?
What tools did he use for welding, and is it available to buy?
What alloy you using?
Beautiful job. Love the inspiration from watching people with real knowledge/skill! I have a similar “case”. Cast aluminum primary case on my ‘83 Shovelhead. Broken threaded lug that sticks out where one of the starter mounting bolts goes into. Someone Repaired it once before. Looks like Lock Tite or...? I have a basic wire feed welder. Can I do this job with this type, Following your tips? Was that acetone you were cleaning with. That’s what I use.
PS....When you started milling, at 13:19 it looked like the mill was stationary and your shop was going back and forth! Look at the stud wall. 🤣
PS ll.....just watched you aluminum practice vid! 👍
It won’t be practical or easy to repair with a wire feed.
MorFab Industries ....thanks!
I call it buttering with the right alloy.
Great video, cast is a pain but its doable. I made a video of my first time welding cast aluminum. What filler rod did you use?
4043
MorFab Industries okay thats the same I use. Thanks
How much would you charge for something like that
hi need a 2002 kx250 rt side case repaired
How hard would it be to repair a case where the opposite side of where the kick starter gear sits the back of the little nub broke off
Why couldn't you clean up broken area and weld a solid pice of aluminum and then drill it? You always do a great job on content and final repair looks great.
Welding on a block would only allow minimal surface area for the weld. It would only be welded around the perimeter of the block. With the way I did it, the metal was added in layers with 100% contact to the area below it. Much stronger in the long run.
I need my clutch cover repaired
Can I send you my case for a repair like this? 🤣
the shirts lol
What filler rod do you use sir?? What code??
4043
ER-4043 3.2mm dia. Sir??
@@nhelpadilla4030 yes sir that’s the one
I need to talk to you sir. I'm from Bangladesh. Is there any way to communicate with you?
probably would of just been cheaper for the owner of the bike to just by a new part then paying a welder $200 an hour, nice work though! ive never seen that before.
HELLO I SENT YOU PICS OF A 2002 KX250 CASE I NEED REPAIRED
Do you need me to resend
HELLO CAN I SEND YOU A 2002 KX250 CASE THAT NEEDS A SMALL REAIR ICAN SEND YOU PICS THANX
HELLO
You never answered back i need my case repaired for a 2002 kx250 i sent you pics already
Spray some wd40 on it
Will the below welder be able to do the same job? Sorry, cant paste a link into comments as it doesn't allow me to post:
Weldforce Welder MIG Stick TIG 160A Fitted With 10A 240V plug WF-160MST WF-06127