My UI24 quit working 4hrs before a gig, this video saved my life. The fuse was not blown and had continuity but I still did the jumper and after blue light was back. Many blessings to you my friend 🙌🏾
Congratulations on sharing yet another top piece of knowledge, saved. I did it and it solved the problem. May God continue to bless you always. By Brazil
Thanks for information! I got a different issue. On boot the mixer loses the previous preset and all parameters values are zero. Only the wifi and ethernet functions work maintaining the values of last time. Thanks for your help!
Brother greeting from Mexico, look I think I have the same problem but sometimes when I start the mixer I can connect just for few second and then turn to “connecting” and never comes back online, I have to switch off and then on again to get few second connection, I already make a full reset but still problem, las 2 attempt leds just kept blinking and wifi led didn’t work anymore
Guys I solved, I applied heat to the F1 fuse only I didn’t jumped or removed, one ET guy told me because this fuse sometimes need heat to activate it again, now my mixer is working without that problem anymore
Saludos con este método que mencionas de puentear el fusible se soluciona el problema hermano yo tengo el mismo problema se queda en los leds verdes y no inicia. Saludos
Gracias amigo pude solucionarlo aunque no conseguí el fusible excacto lo reemplace por un smd 6v 2 A y volvió a la vida de igualmanera encontré en ebay el que cumple con las especificaciones 5v 0.375ma. Gracias por tu valiosa ayuda
@@Eftstudio83 WOW great to know your succes yes the original is 375ma auto reset fuse i ordered also a 700ma may try it in the future i i have time to replce it again
My UI24 quit working 4hrs before a gig, this video saved my life. The fuse was not blown and had continuity but I still did the jumper and after blue light was back. Many blessings to you my friend 🙌🏾
glad to know it also worked for you
😄
Solo sé puentea el fusible o como
Congratulations on sharing yet another top piece of knowledge, saved.
I did it and it solved the problem.
May God continue to bless you always. By Brazil
im glad to know it worked for you too
Thanks for information! I got a different issue. On boot the mixer loses the previous preset and all parameters values are zero. Only the wifi and ethernet functions work maintaining the values of last time. Thanks for your help!
This is the exact information I needed! I'm going to try and fix this tonight.
good luck hope it will work on your unit too
unfortunately it didn't work, on my ui24r
@@davidrcplaneswhat is the problem with yours?
Sir marunong ka din ayusin yung parang may pumapasok na noise sa channels kahit wala namang input?
Alright!
I just soldered the f1 together, do I need to do anything else?
Brother greeting from Mexico, look I think I have the same problem but sometimes when I start the mixer I can connect just for few second and then turn to “connecting” and never comes back online, I have to switch off and then on again to get few second connection, I already make a full reset but still problem, las 2 attempt leds just kept blinking and wifi led didn’t work anymore
You can try the jumper if you have knowledge in electronics
we have the same problem? have you solved yours?
Guys I solved, I applied heat to the F1 fuse only I didn’t jumped or removed, one ET guy told me because this fuse sometimes need heat to activate it again, now my mixer is working without that problem anymore
I just touched by welding gun for 5 sec and that’s it
@@bernardoavalossantos5245 will using hair blower enough? this is what the soundcraft technician told me. I'm going to try it today.
Mine has the same problem but the fuse is ok. no reason to change a working fuse with a jumper
The two ui24r i fixed has working fuse but still jumping it solved the problem
@@kankantandikaigorotan1496for me it didnt do anything. problem remained, so i removed the jumper. The 5v voltage is not oscilating as others pointed.
did you try a full reset after jumper wire
@@espacoipiranga
My soundcraft is just blinking....no wifi signal and the hdmi is not working either....so sad
You can try this if your unit is out of warranty
Saludos con este método que mencionas de puentear el fusible se soluciona el problema hermano yo tengo el mismo problema se queda en los leds verdes y no inicia. Saludos
yes two soundcraft solved
Gracias amigo pude solucionarlo aunque no conseguí el fusible excacto lo reemplace por un smd 6v 2 A y volvió a la vida de igualmanera encontré en ebay el que cumple con las especificaciones 5v 0.375ma. Gracias por tu valiosa ayuda
@@Eftstudio83 WOW great to know your succes yes the original is 375ma auto reset fuse i ordered also a 700ma may try it in the future i i have time to replce it again
Na minha Ui24 não deu certo, o problema continua
that is sad did you try a full reset
@@daniloagds7403
Sir I have the same problem. Saan po kayo located? Gusto ko sana iparepair ui24 ko
Subukan nyo nalang lagyan nang jumper or fuse kung may makuha kayo
@@kankantandikaigorotan1496 pano lagyan sir? dapat ba pag nakalagay jumper, hindi na tanggalin? or ung jumper is para mag reset lang siya? salamat
@@restymalinao2023 pwedeng tanggalin at palitan mo nang fuse kung gusto mo sa kin jumper ko
@@restymalinao2023 permanent na po
Oo