same thing happened to me recently. So after watching this video, I followed the exact same steps and the keyless entry & push-to-start started working again. Thanks for this amazing video.
Hi, thank you soooo much for posting this video. I recently purchased a 2011 q7 with the keyless entry and start engine button not working... And thanks to you, I was able to fix it myself! Thanks again!
In my case they had repaired a blow to the right rear door, and they made the mistake of putting the cables wrong. I swapped them and it all worked great. I can already start my Audi Q7 with the Start button, and the proximity sensors work very well to open and close the doors without removing the key from the bag of my pants. MANY THANKS!!!
It was easy, took maybe 15mins from dismantle to fully assembled. It was the drivers rear door (i could tell it had previously been repainted, so made sense to start there!!).
Thanks for covering this small topic in detail, it was quite helpful, I could tell the garage guys with conviction that this solution would solve my problem and indeed it helped. I would appreciate if you do this video again in detail with clear subject line "Audi Q7 - Keyless entry problem with No start button ignition". Also will appreciate if you can cover the topic of Audi Q7 Front parking warning buzzer replacement. Thanks
Worked on mine someone put the wiring in the wrong way if it’s not working press the start button see if you can hear anything I had clicking out of the speaker in the back door and it was that one Thanks
Could this make problem with start/stop button not working? If you make mistake on one door, would it cause other door not to work? Thank you for your video! Regards
Hii can you tell about VW Passat B7, I've same issue keyless entry not working on door handle meanwhile lock and unlock from remote is working absolutely fine.
It could be the same problem I have in my Touareg: Open or faulty circuit in one of the door handles (sensor or antenna). Use VCDS or a similar diagnostics tool to scan your car to find out.
@@pranavtamboli7143 Thats exactly how it is on my car as well - keyless opening of cargo hatch and keyless start/stop works, but none of the door handles lock/unlock work. Sometimes I can get three handles working if I delete the fault code, but they stop working once it reappears. I can recommend using VCDS as it is a very powerful diagnostics tool, and it will tell you whats wrong and which handle(s) are throwing the fault codes (for me it is the right front handle).
I have a 2012 Audi A6. One of the key FOBs works fine but the other I had not used for some years. When I tried it recently it didn't work, so I replaced battery but still didn't work. I tried the manual lock unlock door and then try, still didn't work. Then tried placing FOB near the dashboard which shows key sign, and still nothing. Has the key got desynced from the car. What else can I try?
Brother, I have a Kia Oprius and I want to know where I can find the smart unlock sensors when approaching the car... When I approached it, it would open by itself, but now this feature does not work
Hey buddy... THANK YOU !!!
Exact same issue...exact same fix.
This guy had plugged it opposite.
I am glad I found this video.
Thanks 🙏
same thing happened to me recently. So after watching this video, I followed the exact same steps and the keyless entry & push-to-start started working again. Thanks for this amazing video.
Hi, thank you soooo much for posting this video. I recently purchased a 2011 q7 with the keyless entry and start engine button not working... And thanks to you, I was able to fix it myself! Thanks again!
Was it hard to fix?
I have a issue with start stop button i have one to start and other one for stop
In my case they had repaired a blow to the right rear door, and they made the mistake of putting the cables wrong. I swapped them and it all worked great. I can already start my Audi Q7 with the Start button, and the proximity sensors work very well to open and close the doors without removing the key from the bag of my pants. MANY THANKS!!!
It was easy, took maybe 15mins from dismantle to fully assembled. It was the drivers rear door (i could tell it had previously been repainted, so made sense to start there!!).
Thank you sir this fixed my problem with my q7
Thanks for covering this small topic in detail, it was quite helpful, I could tell the garage guys with conviction that this solution would solve my problem and indeed it helped. I would appreciate if you do this video again in detail with clear subject line "Audi Q7 - Keyless entry problem with No start button ignition". Also will appreciate if you can cover the topic of Audi Q7 Front parking warning buzzer replacement. Thanks
😂
Worked on mine someone put the wiring in the wrong way if it’s not working press the start button see if you can hear anything I had clicking out of the speaker in the back door and it was that one
Thanks
Could this make problem with start/stop button not working? If you make mistake on one door, would it cause other door not to work? Thank you for your video!
Regards
Yes it would..
Hii can you tell about VW Passat B7, I've same issue keyless entry not working on door handle meanwhile lock and unlock from remote is working absolutely fine.
It could be the same problem I have in my Touareg: Open or faulty circuit in one of the door handles (sensor or antenna). Use VCDS or a similar diagnostics tool to scan your car to find out.
@@Slamm3er thanks, I've run diagnosis on launch obd scan, but shows nothing, and one thing to add keyless trunk works fine
@@pranavtamboli7143 Thats exactly how it is on my car as well - keyless opening of cargo hatch and keyless start/stop works, but none of the door handles lock/unlock work. Sometimes I can get three handles working if I delete the fault code, but they stop working once it reappears. I can recommend using VCDS as it is a very powerful diagnostics tool, and it will tell you whats wrong and which handle(s) are throwing the fault codes (for me it is the right front handle).
@@Slamm3er thanks for your suggestion man, and for me it's all 4 doors handle
I have a 2012 Audi A6. One of the key FOBs works fine but the other I had not used for some years. When I tried it recently it didn't work, so I replaced battery but still didn't work.
I tried the manual lock unlock door and then try, still didn't work.
Then tried placing FOB near the dashboard which shows key sign, and still nothing.
Has the key got desynced from the car. What else can I try?
오!! 감사합니다!! 덕분에 고쳤습니다
Will this cause the alarm to keep going off and killing the battery?
Thanks my friend!!!!
How would you know which door if you bought it with issue?
I would like to know this too.
Hi all, any updates on this question? thanks
Exactly the issue my car had. Switched the wires, push start worked instantly!
Brother, I have a Kia Oprius and I want to know where I can find the smart unlock sensors when approaching the car... When I approached it, it would open by itself, but now this feature does not work
Did you Solved problem?
Alexander Akulchev it seems no
Ни х.. непонятно,но очень интересно)))
That's a blue wire not green
한국인이세요?
예! LA 에 샆이 있습니다.
와 반갑습니다.