I have the delta plastics Toyota gt body , it doesn’t have the dimples that usually come on the body for mounting. Do you have any videos of installation? Thanks buddy. You are always such a big help.
Yes I didn’t show the complete body cutting just parts figure I had so many ppl thinking it’s a hard job I’d do it again in full this time 🙏🙏🙏appreciate your support remembering that video shows you watch 🙏🙏👍👍👍
Hey earl i bought the sbr2.0 it’s bad ass I’m buying the dbxle 2.0 do you recommend all 4 paddle tires or just rear with the sand rail front tires thanks
All 4 paddles worked the best but I did find a 16 tooth pinion and a set of Duratrax lockup’s X to work great in dirt and on road for those jumps I did also find in sand the paddle on hard landing rips the steering rod end out ( breaks them ) so be careful 👍👍👍👍
I think if i,m not mistaken you cut the DR- 10 on video you used sheet rock tape..... Silver in color it was the coolest pattern on the car... Also congratulations on your 7000 YOU TUBE subscribers you do a great job step- by- step ..... video you help me out a lot
Hey earl, go get yourself As set with of wuss left handed aviation snips they have the green handles for the curved parts of the body this is what I use and it makes cutting way easier and you’ll get nice crisp cuts , I cut aluminum all day and use them to cut my bodies you’ll thank me , wouldn’t hurt to get a set of yellow handles as well, just make shurr you don’t get a generic brand they have to wiss or they’ll suck🤙🤙
Earl, I have just gotten the LIMITLESS roller. I have an XLX2 and a CASTLE 1717 1650KV motor on there way with the BITTY DESIGN SEVEN65 body, miscellaneous front bumper, front splitter, foam front bumper, rear body mount frame, body post mount set. I also have the modified center brace for the XLX2, GAME CHANGER FANS & heat sink…receiver, Gyro & RHOUSE21 GAP PACK on the way. Now that I have said all that, do you know of side skirts with a body lock that will work with the LIMITLESS/GT conversion? I have found a set for the C8 on EBay that might work, but it has CORVETTE engraved all over it. I cannot imagine just leaving the sides of the body just floating at high speeds. Thanks!
Thank you for the brain food. My brain is always on future build plans. Thanks dude. Your really helpful guy. 👊😀 Right now I just put a M2C chassy on a Redcat landslide XTE and finishing that on to building a Traxxas Max cause I love watching them fly. They seem like a good send it truck. 👍
Sweet! Earl my friend, I have been looking for a decent body trimming video and I found it. Thank you!
How you doing guy that's a nice setup keep up the good work RC for life peace
Nice job looking good i hate cutting bodys i have three sitting that i don't even want to start hahaha
Coming along nicely bro
Very nice work on the cutting of the body...I would like to watch the long assembly video please...Getting popcorn ready!!!...Thanx in Advance
Ok thanks 🙏
Looking good!!!! Can't wait to see color
Waiting on all the votes from the last video that will decide 🙏🙏👍👍
Great choice, awesome body
Thanks game changer choose it 👍👍👍
Looking good.cant wait to see the end product
Thanks 🙏
Fit like a glove ...nice job ...looks good now without paint ...Keep the suspense going and let the paint reveal be a surprise ???
Yes waiting on ppl to vote there choices 👍👍👍
What a good looking machine and Congratulations 🎉 on 7000 🤜🏻🤛🏻
Thanks 🙏
Looking good can’t wait until you show us it’s when it’s painted 🔥
Yes waiting on everyone to give there color choices and the color with the most recommended will be the color 👍👍💯💯
I have the delta plastics Toyota gt body , it doesn’t have the dimples that usually come on the body for mounting. Do you have any videos of installation? Thanks buddy. You are always such a big help.
Yes OBVIOUSLY post the dang buildup jeez GUY
Looks good Earl yes I would like to see it
Thanks 🙏
That’s looks sick Earl 🔥🔥🔥
Thanks 🙏
Please post the assembly videos . They would be very helpful for noobs like myself. Thanks.
🥶👍🔥🔥🔥🔥💯💯
Thanks 🙏
.....Earl, if ya don’t mind, what brand corvette body is that & is it for the arrma???
Delta plastics 👍👍
Earl i think it was the nova not the DR10 with the sheet rock tape
Yes I didn’t show the complete body cutting just parts figure I had so many ppl thinking it’s a hard job I’d do it again in full this time 🙏🙏🙏appreciate your support remembering that video shows you watch 🙏🙏👍👍👍
Will a box cutter work
Yes score and snap
You have a link to the body?
This body was
Given to me by game changer rc idk where he got it
Great video as usual!!
Hey earl i bought the sbr2.0 it’s bad ass I’m buying the dbxle 2.0 do you recommend all 4 paddle tires or just rear with the sand rail front tires thanks
All 4 paddles worked the best but I did find a 16 tooth pinion and a set of Duratrax lockup’s X to work great in dirt and on road for those jumps I did also find in sand the paddle on hard landing rips the steering rod end out ( breaks them ) so be careful 👍👍👍👍
Great great video👊👊💯💯
Thanks figure I’d make a detail video for you as I know sometimes it looks hard intill you see the whole process 👍👍🙏🙏
@@earlmoorhead5555 yes I needed to see that that’s why we all appreciate what you do👊👊💯💯
Where can i find this body
Or is this the one for a 1/10 but it fits limitless?
Send the link if can please
Delta plastics
I think if i,m not mistaken you cut the DR- 10 on video you used sheet rock tape..... Silver in color it was the coolest pattern on the car... Also congratulations on your 7000 YOU TUBE subscribers you do a great job step- by- step ..... video you help me out a lot
Looks awesome 👌🏿 Forgive if I missed it but which body is this?
It’s a felony body wider in the rear
@@earlmoorhead5555 Which Model and Manufacturer is the body? Follow up painted vid? Looking forward to it as all your builds are top shelf💯👍🏿
Hey earl, go get yourself As set with of wuss left handed aviation snips they have the green handles for the curved parts of the body this is what I use and it makes cutting way easier and you’ll get nice crisp cuts , I cut aluminum all day and use them to cut my bodies you’ll thank me , wouldn’t hurt to get a set of yellow handles as well, just make shurr you don’t get a generic brand they have to wiss or they’ll suck🤙🤙
Earl, I have just gotten the LIMITLESS roller. I have an XLX2 and a CASTLE 1717 1650KV motor on there way with the BITTY DESIGN SEVEN65 body, miscellaneous front bumper, front splitter, foam front bumper, rear body mount frame, body post mount set. I also have the modified center brace for the XLX2, GAME CHANGER FANS & heat sink…receiver, Gyro & RHOUSE21 GAP PACK on the way. Now that I have said all that, do you know of side skirts with a body lock that will work with the LIMITLESS/GT conversion? I have found a set for the C8 on EBay that might work, but it has CORVETTE engraved all over it. I cannot imagine just leaving the sides of the body just floating at high speeds. Thanks!
Any infraction side skirt work with the gt bodies 👍👍
Basherqueen has some but no body locks on them 👍👍but eBay has a bunch of metal one with locks 👍👍💯💯
Found the BASHER QUEEN side skirts. Thanks guys!
@@josephmorelli3191 nice 👍
Looking good Earl. Can’t wait to see the next video on this build 💯🔥👊
Congrats on 7K! Hi Earl yes post the build up. Need videos like this getting ready for some body fitting and this was very helpful.
I use a hole reamer for 90° corners. Would work good for your wing mount corners. Make holes first then start cutting✂️
Thank you for the brain food. My brain is always on future build plans. Thanks dude. Your really helpful guy. 👊😀
Right now I just put a M2C chassy on a Redcat landslide XTE and finishing that on to building a Traxxas Max cause I love watching them fly. They seem like a good send it truck. 👍
Awesome 😎
Congrats on 7k 🎂 yes post the construction of the guts. 👍🤩🙏🏻
Awesome Earl, I like a person who does their own work also creative.👍👍👍✌️
Thanks 🙏
Can you add a link for the body shell?
A like ??
@@earlmoorhead5555 sorry i meant a link
Delta plastic bodies are on eBay I was given this body so I’m not sure where it was purchased from but I know there on eBay 👍👍
@@earlmoorhead5555 looking forward to more of your vids, thanks for the info!
I’m gonna say orange 🍊 /satin finish !!! Might haft to make a poll so we can all vote on it🗳 😇
Nice 👍
I would like to see it
Hell ya brother do it for Dale!
😎😎😎😎
That a delta plastiks
Yes 👍
@@earlmoorhead5555 something about the c6 I might have to do one instead of the c8 on my felony.