The graphics card featured is a Strix 3080, not a 4090 as I accidentally wrote on the annotation at the start. That’ll teach me for editing at 3am after a long day! 😅
You sir earned yourself a subscriber. I've been building computers for a long time but the quality and time you put into building these masterpieces is truly dope man. I've learned a lot already just watching your videos. Keep up the good work.
Me too, they look so good when you execute them well. RGB can work with white, but more often than not it turns all of the white into a colour so kinda spoils it haha
I totally agree. If you would to put another top exhaust fan, some of the front intake fresh air would have been redirected to the top so CPU would not get all of it. It would be OK for 2 top exhausts only if you use AIO, but AIO all around sucks.
The amount of air that pours out the top of that case before it even reaches the top exhaust is surprising. It really demonstrates the power of positive pressure and how effectively this case breathes.
Glad to see you not filling the top with exhaust fans, I feel like a lot of people end up sucking out all the cool front intake air before it gets to the CPU cooler.
@@cat-.-I would suppose you might want to try that to encourage air to the rear half of the case and the CPU cooler. But whether it makes any tangible diff to CPU temps you'd have to actually/physically test out. But as the case is effectively totally perforated and the desire is to get the warm air out (and replaced by fresh cooler air) it hardly seems worth the effort. But try it and let us know maybe.....
Bro I know what you mean. I'm glad Matt knows how to optimize the fan setup for an air cooled build. Filling the case up with as many fans as possible does not always mean the best cooling performance.
Absolutely agree. I have the same case, but black and I just removed one of the NF-A12x25 PWM fans that was before CPU closer to front intake exhausting up at least 20% of fresh air, just doing that I gained 2C on my NH-U12A chromax.
I've watched few of your videos, these builds are so clean and truly airflow focused. I have the same case and the fact that you only installed a single 120mm fan right above air cooler is very well thought. I see a lot people making the mistake installing 2 fans above their air cooler and that is no no, Its OK if you running AIO, but with air cooler some of the front fresh air gets drawing to the top exhaust so your air cooler is not getting the full air flow as it should.
Nice set up. I just moved my 5700x with a 3060ti from a Raijintex Ophion M into a black o11 air mini and I love it. Less noise and better airflow and the cable management was clean and easy. Your other o11 vid was the reson I chose the Air Mini. 👍
i seriously love that air cooler, i just recently bought it and it's perfect. it's quiet, gorgeous and is very high performance; better than a lot of aios tbh
Dude your builds are Sick. Been watching your vids for a while now and they are just Sick ,You have a new sub now ,happy Days keep up the builds bro ,minimalist Love it 👍👍
That sounds really exciting Mark! I agree, the B760 is a solid offering. I can’t believe the price point either. Like £220 for this mobo?!! 😳 so cheap!
I have a white one of these cases also but haven't gone for the overly aesthetic white build as mine is off the floor and desk in a vented cup'd. This really is by far nicest case I've ever had due to its clean modular looks/assembly AND mostly its compact size having the PSU, drive trays, cabling out the back. But I must say I'm envious as that's one good/clean looking build. ❤ Tho stuffing all your spare cable length in the empty drive bays helped you a lot. Slightly surprised you didn't go the whole way and install a white PSU also.......just because you could.
I really love this case. it took me long time to find one in stock in white and bought it. best airflow case ever made. I even installed 3x 360 fans on top and bottom ( yeah they fit ). I have a 4090 FE in that case and it closes perfectly fine with no issues ( ATX 3.0 PSU ) Cool Video though. I love your content man. keep up the good work.
Beautiful build as ever, video production value through the roof as always. But by golly I got frustrated, waiting for a straight on side shot to see how it looks without the side fans 🤭
Great video Matt! Personally I don't like massive footprint cases like the Lian Li O11 as they take up too much room on the desk, I prefer a mid tower ATX but I do see how good this looks so see why people do buy these cases, each to their own.
I"m getting same case today :D I have X670e Asrock mobo and Ryzen 5 7600X with RX 7900 XT :D I start watch your video over and over again :D Tomorrow will be big day for me :D
Personally i'm a fan of a minimalistic/clean rgb fan setup. Using like nzxt f120/140 fans or Lian li AL120 fans, with the rgb light turned down to like 50%, in a static white or blue color, with some non rgb but sleeved psu extension cables, to match the color theme to the rest of the system.
Great build. When showing airflow visualisation, can you also direct the smoke to passively vented areas (open areas of case without fans) to make sure they are not pulling air in? I think it's an important aspect of having a positive airflow that the passive vents always eject air and not take air inside. Cheers!
The white treatment on the heatpipes of the deep cool CPU HSF is unique. Thanks for showing this to us - I don't recall having seen that before (as opposed to many examples of black). Oh, just saw how the motherboard tray is setup ... NEVER seen that. Thanks for showing this case.
Yo Matt gonna let you know, all of your build is freakin amazing and satisfying to watch especially your matx build. Keep up the amazing work! Im loving it!
Your videos are calming my OCD ... we really appreciate your work and we won't miss any occasion to hit the Like button and also to comment, for the YT algorithm, of course :)
I like the white, I'm fed up with the old black box, and I like the compact cube size too but it's all a but rich for my blood. Christ the price of the GPU alone is more than I would want to spend on the whole system, including a monitor.
As usual, wonderful vid Matt, thanks a lot !!! Have myself the black version of the 011 Mini Airflow paired with full black Artic fans and Artic freezer II, work so well :) Might upgrade to Lian Li RGB fans tho :D (waiting for next sales)
@Mr_Matt Lee i would suggest to move the 1st cpu fan to the back of the cooler, this way it doesnt look cramped inside, also leaves beautiful rgb RAM on spot. P.S if the exhaust fan at the back is getting in the way you can just remove it... it will not affect temperatures at all...i've tried by myself with Be Quiet Dark rock 3 pro.
This is very feasible, except for the white gpu, although noticed a white 4070ti for just slightly above msrp..... But that is out of my reach. Also looking forward to see the 100% ram clearance, lcd screen white air coolers from deepcool which they showed off in the ces. Would go perfect with this build and case.
Do those two fans at the bottom make any difference on the GPU temps? From what I've seen in many tests so far weirdly there is none. UPD: I've tried adding fans to the bottom and the difference is immense. Definitely worth installing.
One of the annoying things about building an all white build is that the whites rarely all match. This build has like four different shades of white between the case, the motherboard, the cooler, and the graphics card, which would bother me every time I looked at it.
Pity you can only give one like, beautiful build. Went with the air mini after seeing you previous build the case is a joy to work with. Couldn't see on the vid but i was wondering where you routed the cables from the front 140's?
Thanks so much! Yes for sure, although putting it under stress wouldn’t change anything. The GPU and Fan curve were set at relative speeds to match that of being under stress. The airflow visuals will be stepping up a notch in the coming weeks too 😁
just saw your video, will be getting a newer board and stuff. but i was wondering what pre-built dual or triple fan cpu water cooler would go nice with case. tyvm for any nfo.
From what I've seen the Thermalright Peerless Assassin White edition looks similar but offers better performance. Edit: I got that from the best air coolers video hardware canucks put out 10 days ago.
Im hella jealous. This is so pretty and once again you used my dream card. Want to trade it against my Gamerock 3090 :))))) jk. Butgreat video as always. Maybe even mor chill then usual today.
Great build Mat, you are truly amazing. Hey, have you tried using a 180 degree GPU power adaptor on your builds to make the cables more neat? If not, I look forward to see you build another masterpiece using it. Cheers!!!
The graphics card featured is a Strix 3080, not a 4090 as I accidentally wrote on the annotation at the start. That’ll teach me for editing at 3am after a long day! 😅
Sell gpu 1600usd, u buy?
Merci pour l'explication, j'étais surpris de voir 4090 dans cette config. Good Job
that is why i thought it looked different lol great video nevertheless!
Well, I was surprised that an 850w power supply could handle a RTX 4090 😅
matt just a question with a micro board a the mini air can ya put a 360 in top or has it got no room ? still
Man, this is top shelf entertainment for a PC enthusiast. Kudos to you.
Thank you! Stoked you enjoyed it. Hopefully you took some useful knowledge away too ☺️
@@Mr_Matt_Lee can u run the gpu wire over/above the gpu so it doesnt block the rgb visual ?
PC Porn😉
I have the black version and i love it ! This case is awsome: not too big, not too small, solid, well built, cool.
This is the most beautiful case of them all. So clean, so modern, so classy - I just love it!!!! This is my next build! Well done Matt!
You sir earned yourself a subscriber. I've been building computers for a long time but the quality and time you put into building these masterpieces is truly dope man. I've learned a lot already just watching your videos. Keep up the good work.
Love these pure white builds, very clean look.
Me too, they look so good when you execute them well. RGB can work with white, but more often than not it turns all of the white into a colour so kinda spoils it haha
Have build 30+ Gaming machines and this is hands down the best build I have ever seen. A lot better then those RGB flashy types of builds.
This is exactly the best fan configuration for air cooling build in 011 Air Mini. Also, It only need 1 top exhaust fan above the CPU cooler.
I totally agree. If you would to put another top exhaust fan, some of the front intake fresh air would have been redirected to the top so CPU would not get all of it. It would be OK for 2 top exhausts only if you use AIO, but AIO all around sucks.
The amount of air that pours out the top of that case before it even reaches the top exhaust is surprising. It really demonstrates the power of positive pressure and how effectively this case breathes.
Glad to see you not filling the top with exhaust fans, I feel like a lot of people end up sucking out all the cool front intake air before it gets to the CPU cooler.
Agreed. Always better to have more IN's than OUT's air sources to positive pressure the case. 4 IN + 2 OUT here
@@paolocoletti3424 Does it make sense to cut a piece of paper and stick it at the front 1/2 of the top exhaust?
@@cat-.-I would suppose you might want to try that to encourage air to the rear half of the case and the CPU cooler. But whether it makes any tangible diff to CPU temps you'd have to actually/physically test out. But as the case is effectively totally perforated and the desire is to get the warm air out (and replaced by fresh cooler air) it hardly seems worth the effort. But try it and let us know maybe.....
Bro I know what you mean. I'm glad Matt knows how to optimize the fan setup for an air cooled build. Filling the case up with as many fans as possible does not always mean the best cooling performance.
Absolutely agree. I have the same case, but black and I just removed one of the NF-A12x25 PWM fans that was before CPU closer to front intake exhausting up at least 20% of fresh air, just doing that I gained 2C on my NH-U12A chromax.
Never thought those parts will be so beautiful! Like the RAMs and that keyboard!😍
Wow that was clean! The air cooler is so sweet I wanna take a bite of it! Great content as always Matt, have a great day!
Thanks so much! For sure, I love that air cooler. It’s really bold and elegant. Have an awesome day too my friend! ☺️
I've watched few of your videos, these builds are so clean and truly airflow focused. I have the same case and the fact that you only installed a single 120mm fan right above air cooler is very well thought. I see a lot people making the mistake installing 2 fans above their air cooler and that is no no, Its OK if you running AIO, but with air cooler some of the front fresh air gets drawing to the top exhaust so your air cooler is not getting the full air flow as it should.
Nice. Still yet to see someone attempt an inverted (left-handed) build with the 011.
the airflow display part, it's always my favorite part 6:01
Sweet little build. The AK620 is such a nice piece for this case :) Another well done job.
Nice set up.
I just moved my 5700x with a 3060ti from a Raijintex Ophion M into a black o11 air mini and I love it. Less noise and better airflow and the cable management was clean and easy.
Your other o11 vid was the reson I chose the Air Mini. 👍
Another one of those masterful builds. I love watching your stuff. Such an awesome showcase for the hardware. 😻😻
My case is the black one, it's one of the best cases out there. great build man
God dang this is the most beautiful editing I've ever seen....
This is very handy, just bought the case and I already had the AK620 but mine are black. Gave me good ideas.
i seriously love that air cooler, i just recently bought it and it's perfect. it's quiet, gorgeous and is very high performance; better than a lot of aios tbh
Would you say it would be more silent than a 240mm aio? My aio is so loud…
@@TheSmestn dude, sometimes I have to check if the fan is even spinning cause of how quiet it is lol
Dude your builds are Sick. Been watching your vids for a while now and they are just Sick ,You have a new sub now ,happy Days keep up the builds bro ,minimalist Love it 👍👍
Great vid! I'm glad that the B760 boards is coming out. Since I plan on upgrading to 13th gen pretty soon. :)
That sounds really exciting Mark! I agree, the B760 is a solid offering. I can’t believe the price point either. Like £220 for this mobo?!! 😳 so cheap!
I have a white one of these cases also but haven't gone for the overly aesthetic white build as mine is off the floor and desk in a vented cup'd. This really is by far nicest case I've ever had due to its clean modular looks/assembly AND mostly its compact size having the PSU, drive trays, cabling out the back. But I must say I'm envious as that's one good/clean looking build. ❤ Tho stuffing all your spare cable length in the empty drive bays helped you a lot. Slightly surprised you didn't go the whole way and install a white PSU also.......just because you could.
I really love this case. it took me long time to find one in stock in white and bought it. best airflow case ever made. I even installed 3x 360 fans on top and bottom ( yeah they fit ). I have a 4090 FE in that case and it closes perfectly fine with no issues ( ATX 3.0 PSU )
Cool Video though. I love your content man. keep up the good work.
Got this case and will be building my pc soon. 3x120 fans on the bottom? How about the screws?
@@zandrosoberano you dont screw them all. at the edges wont be screwed.
love your airflow visualization scene
that's the point that every other tech TH-camr failed to give us
thanks from a small Israeli fan ;-)
Beautiful build as ever, video production value through the roof as always. But by golly I got frustrated, waiting for a straight on side shot to see how it looks without the side fans 🤭
The assembly is very beautiful, I congratulate you.
The processor will be very hot with air cooling and such a powerful graphics card.
I really like your music as much as your video's! Wonderful to listen and see for me such nice content. Beautiful combi.
Great video Matt! Personally I don't like massive footprint cases like the Lian Li O11 as they take up too much room on the desk, I prefer a mid tower ATX but I do see how good this looks so see why people do buy these cases, each to their own.
I"m getting same case today :D I have X670e Asrock mobo and Ryzen 5 7600X with RX 7900 XT :D I start watch your video over and over again :D Tomorrow will be big day for me :D
Personally i'm a fan of a minimalistic/clean rgb fan setup. Using like nzxt f120/140 fans or Lian li AL120 fans, with the rgb light turned down to like 50%, in a static white or blue color, with some non rgb but sleeved psu extension cables, to match the color theme to the rest of the system.
YES YES YES, oh man, best thing to wake up brother, love ur vids ❤️
Heck yeah! Thanks buddy, hopefully this gave your Friday the kick start you needed! 🤍
@@Mr_Matt_Lee sure did! almost a pre-workout lol
Great build.
When showing airflow visualisation, can you also direct the smoke to passively vented areas (open areas of case without fans) to make sure they are not pulling air in? I think it's an important aspect of having a positive airflow that the passive vents always eject air and not take air inside. Cheers!
Always a pleasure watching another beautiful build by MML! Your music to go along with this build is great too 👍
Another dose of Mr Matt Lee content! Great way to start the day. Godspeed to you.
good work on these man, thanks. love the airflow visualizations as well.
The white treatment on the heatpipes of the deep cool CPU HSF is unique. Thanks for showing this to us - I don't recall having seen that before (as opposed to many examples of black). Oh, just saw how the motherboard tray is setup ... NEVER seen that. Thanks for showing this case.
Yo Matt gonna let you know, all of your build is freakin amazing and satisfying to watch especially your matx build. Keep up the amazing work! Im loving it!
as for the moment i have to choose, some games are not worth replaying (means i have to wait to play it)
man, maybe I like all white builds.
can't wait for the new studio reveal btw!
I have only just found your channel and it's wonderful! Easily now one of my favourite PC build channels!! Keep smashing out those lovely builds!!
Your videos are calming my OCD ... we really appreciate your work and we won't miss any occasion to hit the Like button and also to comment, for the YT algorithm, of course :)
Love the simplicity 👌
Absolutely ☺️🤍 sometimes it’s just nice to step back into the simple builds and show what can be achieved with limited knowledge and ability.
I like the white, I'm fed up with the old black box, and I like the compact cube size too but it's all a but rich for my blood.
Christ the price of the GPU alone is more than I would want to spend on the whole system, including a monitor.
Bro, yours cinematic are insane!
Super clean build! I'm surprised at only an 850 watt PSU though. I guess your fan count is low and very little RGB, it might work fine.
Love your work, really cool seeing the set-up and how you progress! Stunning shots!
Super!!!!👍👍👍
My next computer will be white.
As usual, wonderful vid Matt, thanks a lot !!! Have myself the black version of the 011 Mini Airflow paired with full black Artic fans and Artic freezer II, work so well :) Might upgrade to Lian Li RGB fans tho :D (waiting for next sales)
Another beautiful setup, I love the white aesthetic 🔥
Magnificent as always. What an art! Keep up the good job man!
@Mr_Matt Lee i would suggest to move the 1st cpu fan to the back of the cooler, this way it doesnt look cramped inside, also leaves beautiful rgb RAM on spot.
P.S if the exhaust fan at the back is getting in the way you can just remove it... it will not affect temperatures at all...i've tried by myself with Be Quiet Dark rock 3 pro.
This is very feasible, except for the white gpu, although noticed a white 4070ti for just slightly above msrp..... But that is out of my reach.
Also looking forward to see the 100% ram clearance, lcd screen white air coolers from deepcool which they showed off in the ces. Would go perfect with this build and case.
Love it. Quality of your videos is incredible! U deserve more than 2 million subs not 40k lol
C'est vraiment magnifique en blanc !! 😍
🤜🤍🤛
Learning from Mr Matt that you don't need to populate gazillion fans to get optimal air flow.
Do those two fans at the bottom make any difference on the GPU temps? From what I've seen in many tests so far weirdly there is none.
UPD: I've tried adding fans to the bottom and the difference is immense. Definitely worth installing.
What fan models for the bottom?
It’s so pretty,but so tight.
One of the annoying things about building an all white build is that the whites rarely all match. This build has like four different shades of white between the case, the motherboard, the cooler, and the graphics card, which would bother me every time I looked at it.
You don't need the top fan, and also che rear one. Try to remove ita and you will make some basic stuff. Stilo top many fans inside.
I love the music you use in your videos! Where can I find them?
I love your videos man , they are so relaxing to watch XD
Pity you can only give one like, beautiful build. Went with the air mini after seeing you previous build the case is a joy to work with. Couldn't see on the vid but i was wondering where you routed the cables from the front 140's?
This pc is made in heaven apparently.
I love it, I love it, I love it
likes the combo of white and silver and keeps it very clean
Do you also build an air system in the LianLi O11 Evo?
That would be so sick with the only rgb being strimmer cables
Super clean build. I wish they made white motherboard PCB.
Have you checked out the ROG Z790 Apex?! Love the white PCB on that! 🤍
Watching this at 4:30 In the morning
The perfect time to relax with a morning brew and watch a chill video ☺️☕️
Might i suggest running the smoke test while the CPU and GPU is under stress test :) thank you! Solid fan and subscriber here!
Thanks so much! Yes for sure, although putting it under stress wouldn’t change anything. The GPU and Fan curve were set at relative speeds to match that of being under stress. The airflow visuals will be stepping up a notch in the coming weeks too 😁
Love this case. I have it in red theme with the GPU and AIO.
nice builds, bit like mine but i like doing it with old kit and making those look nice rather than new stuff
Great build!! Waiting for your build in fractal torrent nano
Would love to see a high end air cooled A4 H20. The new 7900 with a 7900xtx.
Bro, that's beautiful... 🥶
Awesome! I love white builds.
Let’s see the Hyte Y40 in both black and white. I’m looking to get the white one myself.
could you make a budget build with the same fan and case design bc I'm going for a budget build.
The videos you produce are something else! +sub
Thought itll be an ATX board at first, They dont put M on matx board names now huh
What do u do with all these fabulous pc case ? 😂 again a super nice video ! 🔥🔥
❤❤WHITE & SUPER CLEAN I LIKE THAT
clean build bro!
just saw your video, will be getting a newer board and stuff. but i was wondering what pre-built dual or triple fan cpu water cooler would go nice with case. tyvm for any nfo.
As always excellent!
From what I've seen the Thermalright Peerless Assassin White edition looks similar but offers better performance.
Edit: I got that from the best air coolers video hardware canucks put out 10 days ago.
This PC is very pretty!!
Im hella jealous. This is so pretty and once again you used my dream card. Want to trade it against my Gamerock 3090 :))))) jk. Butgreat video as always. Maybe even mor chill then usual today.
Lovely Build and edit. How high is the cpu temp ?
Looks nice! How much did you end up paying for the PC only?, no accessories
An aio will match more with this build, specially the white rog
the ram fits!???? wow thought there was an interference based on the ram height from the website
Here we go!!
Next case try Thermaltake The Tower 500 :)
Do you use a fan hub to connect all the case fans? Or do you connect all of them onto your motherboard?
Perfect build 👍
Great build Mat, you are truly amazing.
Hey, have you tried using a 180 degree GPU power adaptor on your builds to make the cables more neat?
If not, I look forward to see you build another masterpiece using it. Cheers!!!
I also built a 12 generation PC in this case.
i love this case