How To FILL a HOLE in a Wall - CONCRETE Wall!
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Simple tutorial on fixing holes in concrete walls, and repairing them before painting so that you can have a perfectly painted wall!
🔴 Subscribe for more tips just like this: / @rookie.handyman
This video is NOT sponsored (some product links are Amazon affiliate links which means if you buy something we'll receive a small commission).
Tools used in this Project:
Concrete Patch & Repair:
amzn.to/3hitc7g
Fine finishing Spackle Wall Repair Kit:
amzn.to/3PjI7dX
Electric Heater Fan - Indoor Use:
amzn.to/3iXcydQ
If you enjoyed this video, please like and subscribe to the channel!
Thanks for watching, and be sure to watch more of our DIY videos.
* * * * * * * * * * MORE VIDEOS * * * * * * * * * *
🎬Watch our most recent videos: www.youtube.co...
How To Remove Stickers from Mirror or Glass
► • How To Remove Stickers...
How To Inflate Car Tire With Gas Station Air Pump
► • How To Inflate Car Tir...
How To Disassemble and Reassemble the Mechanical Pencil
► • How To Disassemble and...
How To Cut Glass WITHOUT a Glass Cutter!
► • HOW To CUT Glass WITHO...
#howto #holes #repair
Many thanks sir . Most helpful.I will come back to your videos for further help when needed.
Thank you a lot, glad it was helpful 👍👍
I found your energy to be contagous 😄
Thanks for the tutorial
😁😁 Happy to hear that! Thank you for your support! 👍👍
يا 😊
This was really helpful! Thanks!
Glad it was helpful! Thx for your comment! 👍
Use a squeezing bag, not a spatula, it will be much better
Correct, it would be much easier with a squeezing bag, unfortunately, I didn't think to make one for this project.
Will do it for the future ones, thank you for the advice!
You can improvise a squeeze bag easily with a ziplock bag by filling, sealing, and then cutting off one of the bottom corners, as well.
A piping bag and fine tip might help
Good tip, thx! 👍
i thought it would be good to use like a syringe, fill it up and push it in that wall hole, so that it is fully covered ( not just outside ), so that it is strong enough
Nice idea for sure, I haven't thought about it that way 👍👍 it depends on the thickness of the filling mass, or you would have to use a thicker syringe 👍
Thanks for video🎉🎉
Thank you bro 👍👍
love your energy, thanks by the way!
I appreciate that, you are welcome bro 👍👍👍
Thanks
You are welcome 👍
Thank you very much, saved me from calling a repairman!
P.S. Izgledaš nešto poznato 🤷♂️
You're welcome brother! 🙂
Moze biti da smo se negdje vidjeli 😃
But this just an esthetic reparation, you whole is still existing under the fix, we need to fill it deeper in order ot be able to reuse the wall in the future. in your case, I I need to recreate a whole at the same place I will fall in this empty zone and then bad surprise. please explain how I can to fill very deep a whole. thanks
Thank you for your question, yes this was only esthetic reparation, I wanted to have clear wall without any holes. If you want to reuse the same hole, than you need to use some more permanent mixture, please take a look at this video, once this mixture is dried out you can redrill in it:
th-cam.com/video/vD8W-RFqpXY/w-d-xo.htmlsi=rkJe7coZbGXtvcMe
will this work for a hole that is about 1 inch in diameter from where it was drilled for a pipe from the well to enter the home and never used..... when it rains heavy, water enters through the hole(basement wall)
If there is water there, I think that you need a concrete solition than. You can buy in any hardware store concrete mix and fill that hole with concrete mix, water cant go throught concrete that easily. My solition is more “make it look pretty”, but if you have water there sometimes, go with concrete. Good luck 👍
Can I re drill for coat hanger again after?
Yes you can, it should hold your coat hanger without problems, but I found that this mixture was much better for redrilling:
th-cam.com/video/vD8W-RFqpXY/w-d-xo.html
😊
Thx for your comment! 😊
👍🏻
Thank you 👍
Please count everything out loud and say hahaha after you count 😅
Are you from the balkans? 😅
Bosnia 😁