Most of the people demands code,,but it takes lot of efforts in coding when you are not using Arduino.Aapke bahut sare projects core controllers par hai, Arduino ke codes easily mil jate hai isliye embedded projects me copy and run chal rha hai, but ham jese kuch log hai jo aapki mehnat aur knowledge ki kadar karte hai,
Thanks muze us layak samzne ke liye..I am using core controllers since 2007 that's why I know each and every things about interfacing. But aaj sabko bina efforts ke sab chahiye,,Embedded Programming bahut interesting hai,,but copy and paste ke karan koi jyada dimag nahi lagana chahta.
Actually we have used 1.5 AH battery in our prototype project, it worked for 3 hours on single charge. Range of RFID reader was max 10cm. It was passive RFID reader.
Bro isme aurdino ya raspberry Pi use Kia h kya plz reply kyuki me ye final year me banana chahta hu par aurdino aur raspberry Pi allowed nhi h use karna
8052 Microcontroller ko use Karke bana sakte hai,, latest Smart Trolley Wala video dekhiye hamare channel par,,,hamne 8052 Microcontroller use Kiya hai usme.
Are we going to use RFID tag for each item? Like for each biscuit packet one RFID tag is used? Then it will cost more Then how this is advantageous compared to scanning QR code?
Good Question, Yes we use RFID Tags for each items, and that can be reusable flexible type, Once shopping is done and after complete payment, remove that tags from product and make it ready for another one with database update.
What kind of battery that you used ? Can you explain to me if you soldering the battery wire and where it should be connect after that ? If i use 9v battery could it be connect as well ?
how do i setup a wireless rfid reader...basically i'm having an idea of putting a reader at my door to read passive tags that comes through...how do i go about it
For wireless RFID reader you need Transmitter and Receiver mechanism. RFID reader installed at the door send the code through RF data Modem to your Host controller.
Please do you have a video showing how to go about this..can you help with a list of tools I’ll need to do this? Like what type of rfid reader (read/write uhf tags ) and transmitter or receiver. Thank you!
Can you teel me how much did that printer cost you, and what is it exactly called as ?? And the Circuit diagram has the thermal printer attached on both the Transmitter side and receiver side could you explain this??
@@DEEPAKYADAV-hb8nl it is called Mini Thermal Printer, Cost around INR 2K. Once again Check the Circuit Diagram, At Transmitter Side RF Modem and RFID Reader connected. At Receiver end Mini thermal Printer and RF Modem is connected with Micro.
We will share the project report on your email id, so kindly send email to us with title of video. Email id available at the about section of our channel.
We can provide you pre-programmed board, or you can refer coding video available in our channel RFID interfacing with Microcontroller and Thermal Printer interfacing with Microcontroller.
Good Question, uska bhi solution hai, Smart trolley me load cell lagakar, jitne bhi items add hoge uska weight bhi register kiya jayega, agar bina scan kiye trolley me material gaya to weight difference display me aa jayega.
👍 Appreciate for Sharing fine video ! I want to try this out , Would you please share the detailed report ? I'll send you email 😀😀
I have shared the details in your email id, kindly check it.
@@TheTiaraTechShow Thanks for your prompt reply !! 😊
@@TheTiaraTechShowhi can u share with me
@@codejclown927 kindly send email to us, in reply you get requested information.
i also emailed you @@TheTiaraTechShow
Most of the people demands code,,but it takes lot of efforts in coding when you are not using Arduino.Aapke bahut sare projects core controllers par hai, Arduino ke codes easily mil jate hai isliye embedded projects me copy and run chal rha hai, but ham jese kuch log hai jo aapki mehnat aur knowledge ki kadar karte hai,
Thanks muze us layak samzne ke liye..I am using core controllers since 2007 that's why I know each and every things about interfacing. But aaj sabko bina efforts ke sab chahiye,,Embedded Programming bahut interesting hai,,but copy and paste ke karan koi jyada dimag nahi lagana chahta.
Project banane me bahut help ho rahi hai, program bhi diye ho kuch kuch projects ke, iska bhi program explain karna.
ok,will try to share more and more information.
If i replace the second pipe fitting accessories with pvc conduit fitting it is good to use on this project ?
Yes you can use PVC,it will provide more strength to it.
feet spotted at 9:40
Ohh Yes,
Hello, it is amazing. Can you please share the detailed report over email? :)
kindly drop an email.
Sir kindly is ka jo lcd is ki jagha hum tablet lcd use kar sakte hia
OLED Graphical display use kar sakte hai,
thank you for this awesome vieo. please can i get the detailed report?
please send email.
@@TheTiaraTechShow do I type my email here on the comment section or is there some where I can go send it to you.
@@mosesomeneki6060 write email to us. Our email ID available at the end of description.
how long does the battery last and what is the range of the rfid reader
Actually we have used 1.5 AH battery in our prototype project, it worked for 3 hours on single charge. Range of RFID reader was max 10cm. It was passive RFID reader.
@@TheTiaraTechShow you do have any recommendations to battery that can last for a month or more and also rfid reader with a longer range
@@MOSESOMENEKI ok you require active RFID reader for long range. For battery need to do calculations of current consumption.
@@TheTiaraTechShow can i have the detailed report as well, and followup with some questions...if that works for you
@@MOSESOMENEKI kindly drop an email, email id available at the about section of our channel.
What kind of battery explained. And which components are used in this project.
Sealed Lead Acid rechargeable battery used. Main Components are RFID reader, Cards, RF Data Modem, LCD, Mini thermal Printer etc.
Can we do it without printer ?? Any changes in or any product reduced
Yes it can be possible. We can customise it.
Sir instead of a thermal printer can we use a bluetooth module to send the data to our mobile phone or to any PC?
Yes , you can use the Bluetooth module also
Please sir make a program vedio also about this project
Ok we will do, kindly give us some time
@@TheTiaraTechShowpls upload program video
@@fizzaishaq4359 OK
Bro isme aurdino ya raspberry Pi use Kia h kya plz reply kyuki me ye final year me banana chahta hu par aurdino aur raspberry Pi allowed nhi h use karna
8052 Microcontroller ko use Karke bana sakte hai,, latest Smart Trolley Wala video dekhiye hamare channel par,,,hamne 8052 Microcontroller use Kiya hai usme.
@@TheTiaraTechShow th-cam.com/video/GKOsQb1fJNE/w-d-xo.htmlfeature=shared yahi h kya
yes yehi wala..
can i get the program
What size for nut and screw that you use in this project ?
3mm,, you can select size of screws as per your structure.
How to connect ttl thermal printer to the laptop
Use USB to TTL converter Module or you can buy Thermal Printer with USB interface.
Are we going to use RFID tag for each item? Like for each biscuit packet one RFID tag is used?
Then it will cost more
Then how this is advantageous compared to scanning QR code?
Good Question, Yes we use RFID Tags for each items, and that can be reusable flexible type, Once shopping is done and after complete payment, remove that tags from product and make it ready for another one with database update.
@@TheTiaraTechShowThank you sir😇✌️
Then removing tag for every product aslo waste of time bro
Send the block diagram. And how to explain the work
email us, we will share the project details. email id available at the about section of our channel.
Plz share sir
@@gurudevisnjnv-bgk367 not received any email from your side, pls send email. in reply you get project report.
@@TheTiaraTechShow no sir
What kind of battery that you used ? Can you explain to me if you soldering the battery wire and where it should be connect after that ? If i use 9v battery could it be connect as well ?
we have used rechargeable battery of 4 volts 1.5Ah, 3 batteries are connected in series to make 12 volts.
If someone enter product without billing then how will machine recognise
There need design modification in the structure of trolley. Without scanning the product, door will not open of the trolley.
can we implement this without RFID right??
No, we need to use RFID, project based on RFID technology.
how do you send data to the thermal printer
Using AT commands through serial lines rxd and txd. Baud rate 9600, kindly refer to the datasheet of it for commands
thanks, btw whats rf data modem, im getting a hardtime searching that component online
what micro controller did you use for this? sorry for having multiple questions
@@loydvincentbutron4345 8051 microcontroller nuvoton 78w052ddg
what's the name of the thermal printer
Mini thermal printer TTL interface
how do i setup a wireless rfid reader...basically i'm having an idea of putting a reader at my door to read passive tags that comes through...how do i go about it
For wireless RFID reader you need Transmitter and Receiver mechanism. RFID reader installed at the door send the code through RF data Modem to your Host controller.
Please do you have a video showing how to go about this..can you help with a list of tools I’ll need to do this?
Like what type of rfid reader (read/write uhf tags ) and transmitter or receiver. Thank you!
Hey I want to buy that project
Do you want complete Project or semi assembled Kit?
Can we design it by using a QR code reader?
yes you can, just replace RFID reader with QR code Reader, also need to modify the microcontroller code.
Can you please share the reference code and component list
Kindly check your inbox, I have shared the Project details.
Can you teel me how much did that printer cost you, and what is it exactly called as ?? And the Circuit diagram has the thermal printer attached on both the Transmitter side and receiver side could you explain this??
@@DEEPAKYADAV-hb8nl it is called Mini Thermal Printer, Cost around INR 2K. Once again Check the Circuit Diagram, At Transmitter Side RF Modem and RFID Reader connected. At Receiver end Mini thermal Printer and RF Modem is connected with Micro.
What type or name of wood that you attach all component in this video and what is size and thickness for this wood ?
In our local market we call it backlit Sheet, thickness is 2.5mm
@@TheTiaraTechShow in other name is acrylic sheet ?
@@jerseyboys6201 acrylic sheet also the best option
What is the total cost for this project?
Last time we have invested 12k for complete project including printer and all. Cost depends upon the current prices of components.
We'd like to know about this project in detail. How can we contract?
kindly drop email to us, email id given in about section of our channel.
@@TheTiaraTechShow where is your email ID
@@shaliniraghupatruni4324 email id is tiaraelectronicsprojects@gmail.com
Can I get the code and circuit diagram
I can share Circuit diagram and Project details in your email ID. Kindly drop an email.
sir can we buy this project
Aapki location??
whats rf data modem, im getting a hardtime searching that component online
Rf data modem is based on HC-12 Module, search it, available in market. It has TTL interface
this only what ive seen in the market "HC-12 RF Tranceiver Modules 433MHz" is that the same with yours?
@@loydvincentbutron4345 yes
Please share the code
Will share the sample code on your email id. Kindly drop email but wait for few days at present i not available in my office.
Sir plz send mechanism
Do you want an Electronic kit or complete trolley unit.
can you please provide the reference code for it i am facing come difficulty to make it
and please share the reference paper for it
I can share the project report, please contact through email.
Can you plz tell what is the total cost of ur project ..!
Last time we invested around 12k for both units.
Sir please share reference paper you use and if you have project report please upload sir . I am face difficulty to make circuit.
We will share the project report on your email id, so kindly send email to us with title of video. Email id available at the about section of our channel.
@@TheTiaraTechShow done sir
I send you mail
@@shivammaurya7789 ok wait for sometime. After opening of office at 10 am, I will share the requested information.
@@shivammaurya7789 kindly check your inbox.
Hey can you please share the code
We can provide you pre-programmed board, or you can refer coding video available in our channel RFID interfacing with Microcontroller and Thermal Printer interfacing with Microcontroller.
i didnt find the mail id can you please share it once
tiaraelectronicsprojects@gmail,
kindly check your inbox i have shared the project details.
Sir can you share the code plz sir
We are doing mini project on this technology only plz provide the code
I can share hex file only along with project details.
@@TheTiaraTechShow
Ok sir plz give hex file
hello sir mko ek project bnana h to aapki help lgegi i will pay for it
Project name??
@@TheTiaraTechShow sir i have an idea so please contact me
@@shivambansal9663 kindly share your idea, email id is available at the about section of our channel.
he will definitely assists you.
Sir please provide me code it is helpfull me
We can provide you preprogrammed MCU Board.
Koi product scene nhi kre Bina trolley me dal de to
Good Question, uska bhi solution hai, Smart trolley me load cell lagakar, jitne bhi items add hoge uska weight bhi register kiya jayega, agar bina scan kiye trolley me material gaya to weight difference display me aa jayega.
Sir please send me this project code
we can provide you preprogrammed Board or Hex file.
Could you please share the details of the project report , I I'll send you e-mail 😊
Please wait for few minutes..i will share the details..
Sir code pls
we can provide preprogrammed IC board or Hex code
program sir
we can provide a preprogrammed MCU board.
Hey please can you send complete details of this project to my email
Please wait for few hours, I will share the details.
can you share your email id
contact details available at the about section of our channel.