I have watched countless headstock repair videos over the years. This is the best one I've ever seen. Simply outstanding! 私は何年にもわたって無数のヘッドストック修理ビデオを見てきました。 これは私が今まで見た中で最高のものです。 ただ素晴らしい！
I've only seen Gibson headstock repairs involving splines, dowels or jointed inserts before. Never a glue up followed by mahogany laminations. Very innovative! 👍
There are plenty of comments on the luthiery, and I agree it is unparalelled craftsmanship. I would like to compliment the videography and say that I would love to see longer videos.
Wow, truly amazing repair job. You can't even see the original break! You are truly a master luthier. I bet the guitar sounds better & stays in tune longer now! Kudos to you & the lucky customer who obviously chose the right person to fix their guitar.
As with all of your videos, I'm amazed at the final result and totally mesmerised by the steps you take to achieve it. I'm fairly sure that this repair took longer to do than the original guitar took to build at the factory. Blown away as always. Love your work. I hang on a thread waiting for the next one.
One of the **finest*** neck joint workmanship ever. Been watching a lot of guitar neck joint work and this one is simply on GOD tier level. Love it! Thank you sharing your masterful craftsmanship. This is ART!
In the case of a Gibson guitar, it really doesn't take much to be stronger at the headstock to neck transition. However, I don't think such a stacked overlay provides much extra tensile strength. I rather think that what was achieved in this repair is essentially padding, for any future falls or drops. The layers of veneer simply are not integral to the through grain of the neck wood, but they do add mass where the Gibson headstock is weakest, which is under the truss rod cavity. Given that string tension alone alone is unlikely to cause a headstock break, this is a good approach, versus what many luthiers do, which is to install splines, ostensibly to increase rigidity under load. It could be clearly seen during the sanding process, before the first veneer was applied, that Gibson's fatal design flaw is the lack of wood beneath the truss rod cavity. This area is technically strong enough to survive the life of the instrument, provided it neither falls over, nor is dropped. Incredible attention to detail in the finishing process.
@@ogsworks Please see my reply to Martin. Were you guided by the principle that I noted? The repair is very clever, and was beautifully executed. Bravo!
Awesome repair my friend!! You possess tremendous skills, & it all shows in your work! I don't know which takes more skill: A). Repairing & stabilizing the break in that neck? OR B). Refinishing the back of that neck & headstock to look like nearly new again, & blend with the existing finish on that Guitar?? Either way you have the skills it took, to do a FANTASTIC job with both!! I will be watching for more of your great work!! Ron H. Abilene, TX. USA
Another excellent repair. I am a luthier hobbyist and have seen several different head stock repair methods on TH-cam but I like your method the best. I look forward to having the opportunity to use it myself. Thanks for sharing your skills.
If ever I break a guitar. I want this amazing guy to fix it. I love watching craftsmanship at its best. I want to buy the yamaha that he fixed. Keep up the videos my friend Love watching
This is how guitar repair should be done.. no steps were skipped, and I believe utmost professionalism and care were shown in repairing the broken neck, it is probably far stronger than it was originally, and even stronger than others.. the angle of the headstock is probably the weakest design in Gibson electric guitars (yes it creates a better breaking angle for the string but the angle itself has more it’s drawbacks).
The break is completely hidden and the repair is flawless, but no structural support was done. All that holds it together is glue on an imperfect joint, which is now weak. The slightest knock will break it again. Splints would make it stronger, it just wouldn’t look perfect.
I agree. The repair is gorgeous, however the layers of veneer add only mass. This might help the headstock survive a slight knock, but certainly not a fall or drop.
ここまで完璧なネック折れリペアは初めて拝見しました。
折れた箇所が本当にわかりません、すごすぎます。
ありがとうございます‼︎
I have watched countless headstock repair videos over the years. This is the best one I've ever seen. Simply outstanding! 私は何年にもわたって無数のヘッドストック修理ビデオを見てきました。 これは私が今まで見た中で最高のものです。 ただ素晴らしい！
Thank you very much for the lovely compliment!
Are most of the headstocks Gibson?! I can't tell if it's a manufacturers fault or owner tradition 😅
I agree …. I had to watch this video 3 times to process the craftsmanship being done.
This is truly the pinnacle of guitar repairing. Totally blown away.
Thank you so much!
Unparalleled craftsmanship.
I've only seen Gibson headstock repairs involving splines, dowels or jointed inserts before. Never a glue up followed by mahogany laminations. Very innovative! 👍
Thank you very much for the lovely compliment!
Very interesting, eh. The grain of the different sheets was all in the same direction, wasn't it?
Same snap
ずっとみてられます、凄すぎる😳😳
ありがとうございます♪
すごいです！もはや折ったところが分からないレベル。
こんなに丁寧なリペア初めて見ました！
自分も折ってしまった際にはお世話になりたいです🎵
こんなに手間掛かってたんですね！昔、レスポールの同じ箇所を折ってしまいリペアしていただいた事があります。私のも全く見た目では全く分からないくらい完璧に治ってきたので感動したのを覚えています。20年近く経ちますがいまだに現役です。こんな大手術を乗り越えて復活したのを知って物凄く愛着が増しました！動画を上げて頂いてありがとうございます。
めちゃくちゃ勉強になりました‼️
ここまでしてくれるリペアマンは見たことがないです。
素晴らしいセンスと技術、そして丁寧な仕事。
待ってました！いつもながら、惚れ惚れする仕上がりですね。今年もogsworksさんのチャンネルでたくさん感動したいので、沢山の配信を心待ちにしています！
素敵な動画をありがとうございました！
ありがとうございます‼︎
ネック折れの補修は折れた箇所をくっ付けて色を塗れば終わりと思っていましたが、補強が必要なことを初めて知りました。
また、筆塗り塗装の技術が素晴らしく感動すら覚えました。
万が一、愛機のネックが折れた際にはお世話になろうと思います。
ネックの３プライ＋耳貼りそれぞれの材の微妙な色の違いまで調色して再現してしまうなんて、鳥肌立ちました！
いつも感動してしまいます。素晴らしいです！
ありがとうございます‼︎
キレイに仕上がっていくのが、見ていて本当に感心します❗
自分のギターが直ったように嬉しくなります‼️
ありがとうございます‼︎
The attention to detail down to making the headstock look like separate pieces again is unbelievable 👏
ネック折れに、ここまで手を掛けて修理するなんて…本当驚きです。素晴らしいですね。
ありがとうございます！
There are plenty of comments on the luthiery, and I agree it is unparalelled craftsmanship. I would like to compliment the videography and say that I would love to see longer videos.
Wow, truly amazing repair job. You can't even see the original break! You are truly a master luthier. I bet the guitar sounds better & stays in tune longer now! Kudos to you & the lucky customer who obviously chose the right person to fix their guitar.
Thank you so much‼︎
By far the most passionate and most masterful headstock repairs I have ever seen.
Thank you‼︎
This is the best guitar repair video I've seen so far! You are an artist! Beautiful work!👌❤️
As with all of your videos, I'm amazed at the final result and totally mesmerised by the steps you take to achieve it. I'm fairly sure that this repair took longer to do than the original guitar took to build at the factory. Blown away as always. Love your work. I hang on a thread waiting for the next one.
Thank you for your lovely comment!
I'll do my best to upload next one as soon as possible.So please wait little longer.
@@ogsworks Always do!😃
Incredible workmanship! First time I have ever seen this method. The repair is a work of art - definitely stronger than the original design. 👍
もはや魔法と見まごう修復ですね。いつもながら映像も綺麗で観入ってしまいました。
ありがとうございます😊
One of the **finest*** neck joint workmanship ever. Been watching a lot of guitar neck joint work and this one is simply on GOD tier level. Love it! Thank you sharing your masterful craftsmanship. This is ART!
That’s GOT to be the best neck repair I’ve ever! Seen. Superlative.
Thank you!
God forbid, but these videos almost make me want a headstock break just for someone to repair it like this. This is art.
Wow, that must be the world's best headstock repair. Perfect craftsmanship.
こんな修理初めて見ました
驚いた！
ありがとうございます!
I would have no problem buying a guitar that was repaired in this manner. Excellent.
相変わらず素晴らしい仕事ぶりです。
ただ•••なんやろ•••良い編集なんだけど
もう好きすぎて、乾かして放置してる時以外は
ノーカットで見せて欲しいって欲が出てくるw
貴重なご意見ありがとうございます。
参考にさせていただきます。
職人の意地というか執念というか、すごい映像です。
・・・
こういう時って、「ここまでやらせるのか！」って言いながら、ココロの中でニヤリとしているのかもしれないと思うと、ゾクゾクしますね🤭🤭🤭
ありがとうございます‼︎
I never want these videos to end! Masterful!
Thanks!
Like a surgical operation !. What skills ! Marvellous work. Absolutely fantastic. Greetings from Scotland 🏴.
Wow! Your Master Luthier even re-shaped the valute! Thousand thumbs up mate!
simply the best! Don't know anyone in US or EU with your skillset... you are a true master.
Thank you so much!
リペアーはいつもながらスゴイ。動画も素晴らしい。本当に驚く工房だ！
ありがとうございます‼︎
素晴らしい！効果音が臨場感あり今そこで見ているかの様に撮されているね。撮られていたのわかりませんでした。
ありがとうございます！
Best Gibson neck repair EVER!
Thanks:-)
This is the best repair job on headstock that i have seen! Very fine and accurate!
Thank you very much for the lovely compliment!
Some companies never learn. Shameful that Gibson persists in it misakes. Great repair.
いつもながら凄い技術😍SGが生命を取り戻して行く姿に感無量です👍😊
ありがとうございます！
This is the work of a true master. Better and stronger than new and exquisitely beautiful.
Your a craftsman and an artist. I’ve watched a lot of headstock repairs and none come close to the steps that you take.
Thank you very much for the lovely compliment!
your work seems better than original state for real. Nice Work, you are true artisan
Thank you:)
Thought I was going to watch another video with a spline repair…nope. Very clever! More work but functional and very nice appearance!👍
Thank you very much for the lovely compliment!
ここまでのものはさすがに、と思ってしまいましたが、同じギターだとは到底思えない仕上がりに言葉もありません。職人の魂ですね！
ありがとうございます😊
Great stuff. Love the airbush work, especially.
That may be the best repair I have ever seen .
Thank you!
Beautiful. Far stronger than when it was new!
Thank you so much!
In the case of a Gibson guitar, it really doesn't take much to be stronger at the headstock to neck transition. However, I don't think such a stacked overlay provides much extra tensile strength. I rather think that what was achieved in this repair is essentially padding, for any future falls or drops. The layers of veneer simply are not integral to the through grain of the neck wood, but they do add mass where the Gibson headstock is weakest, which is under the truss rod cavity. Given that string tension alone alone is unlikely to cause a headstock break, this is a good approach, versus what many luthiers do, which is to install splines, ostensibly to increase rigidity under load.
It could be clearly seen during the sanding process, before the first veneer was applied, that Gibson's fatal design flaw is the lack of wood beneath the truss rod cavity. This area is technically strong enough to survive the life of the instrument, provided it neither falls over, nor is dropped.
Incredible attention to detail in the finishing process.
@@ogsworks Please see my reply to Martin. Were you guided by the principle that I noted? The repair is very clever, and was beautifully executed. Bravo!
The finest work to repair damage in the world.
Thank you!!
The beauty of your work is the equal of the most beautiful music that these instruments can make, you are are an amazing artist.
Thank you so much!
Thats One Hell of a Head Stock Repair Sir , Great skills and Attention too Detail
Thank you so much!
Not seen that before. Really nice work.
i have seen few repairs, but never seen anything like this. just awesome.. 👍👍👍
Thank you!
Nice work ... watching I have to wonder how much life is left on the trussrod... definitely a few threads showing..
素晴らしい。職人技ですね。
ソリッドギターも嬉しそう。
ありがとうございます♪
This fella has SKILLS!! I thought I was good, dude could take me to school!!
This will. E my “Go To” video from now on!🎸🎸🎶
継ぎ目のところまで再現するところに感動しました。
ネック折れはショックに違いないですが、折れたら折れたでこちらに修理を出すのが楽しみな気持ちにさえさせてくれます。
ありがとうございます。
折れない事が一番ですが、もしそうなった場合には是非お声がけ下さい。また、それ以外の修理・調整も承っておりますのでその際にもご相談頂ければ幸いです。
Amazing! What an artist you are. Wish some of the camera shots had been better so I could see exactly the work you were doing.
Thank you.
I will be more careful in future.
Sheer skill and perfection at work here … fabulous repair👏👏👏👏
Your finish work is top notch. That's not an easy thing to get right. Nicely done!
Thank you for watching.
I’m glad to hear that!
Great job, your skill is out standing
Thank you！
I have never seen a Fender headstock repair. Anyway, nice job!
Thanks!
Best repair I've ever seen , Awesome job mate 😁😁🤘🤘
Thank you so much😊
Absolutely perfect! When love and craftsmanship unite into one!!! Amazing work!
Thank you!
amazing skills! might come to the shop someday for guitar maintenance
Thank you so much!
This is the mother of all headstock repairs. ..what repair?
以前ネック折れのリペア動画を拝見し感嘆しましたが、ここまで分離してしまっても直せるものなのですね…
修理依頼された方も喜びより驚きが勝ってしまいそう（笑）
今回もご視聴頂きありがとうございます。
そうなって頂ければ幸いですね♪
I really am I awe!!!! Incredible work presented here. Turned out fantastic actually!!
Master artistry for sure, without a doubt.
Beautiful workmanship. A true craftsman.
Thank you :)
A work of art , a very talented craftsman, first class work. Thank you for sharing.
Thank you so much!!
Excellent repair with amazing attention to detail !
Thank you so much:-)
Awesome repair my friend!!
You possess tremendous skills, & it all shows in your work! I don't know which takes more skill:
A). Repairing & stabilizing the break in that neck? OR
B). Refinishing the back of that neck & headstock to look like nearly new again, & blend with the existing finish on that Guitar??
Either way you have the skills it took, to do a FANTASTIC job with both!!
I will be watching for more of your great work!!
Ron H.
Abilene, TX. USA
Thank you very much for the lovely compliment!
Another excellent repair. I am a luthier hobbyist and have seen several different head stock repair methods on TH-cam but I like your method the best. I look forward to having the opportunity to use it myself. Thanks for sharing your skills.
If ever I break a guitar.
I want this amazing guy to fix it.
I love watching craftsmanship at its best.
I want to buy the yamaha that he fixed.
Keep up the videos my friend
Love watching
Thank you so much:)
@@ogsworks
How many hours work did the yamaha ll56 take to fix.
What happened to the guitar. 🎸
Dean 🇬🇧
日本人の精密さは相変らず生きていますね。 美しい作業です。its amazing !! from korea
ありがとうございます！
Beautiful work, and what fabulous result. Incredible.
Thank you so much!
Amazing work as always. Congratulations. Always attentive to watching your videos!
Thank you!
すごい！！ I have a friend in Chiba and hope to visit next year... I plan on bringing some Martin swag for the great work you guys do!!
ありがとうございます♪
When you come to Japan by all means please visit my store！
@@ogsworks hopefully 2022! we shall see!
Superb craftsmanship....... brilliant result!
Thanks:-)
This is how guitar repair should be done.. no steps were skipped, and I believe utmost professionalism and care were shown in repairing the broken neck, it is probably far stronger than it was originally, and even stronger than others.. the angle of the headstock is probably the weakest design in Gibson electric guitars (yes it creates a better breaking angle for the string but the angle itself has more it’s drawbacks).
Thank you so much:)
Amazing job! I have a all original 67 large guard SG (no valute) and a headstock break is my worst nightmare!
Thank you!
The master is an artist. Great attention to detail.
Thank you!
If I ever get a broken headstock can I ship it to you?? Beautiful craftsmanship!
I bet it's stronger than before! Thanks!
Wow!! Thanks for sharing this method of repair. Inspiring.
Thank you.
Wow! Incredible workmanship!
Thank you so much!
Incredible repair. You are very talented
Thank you!
My mind is blown. Absolutely Incredible work!!
Thank you so much!
I just put my J45 in for a neck repair...so tempted to send this to the luthier. He's pretty good, but this is next level.
You are the master of repairs respect .
Thanks!
Absolutely fantastic work
Thank you:)
@@ogsworks sir what is that thin veneers.? How thin are they!
Much,.much respect to this incredible display of skill, talent.and artistry.
Thank you! I’m so glad.
Amazing work. looks fantastic. Thank you, for sharing a look, at your skills.
Thank you so much‼︎
Incredible!!!! Impressive work!!!👍👍👍
砕け散ってないだけまだ有難いですね…
この技術、日本人として誇らしく思います。
Truly a work of art
Thank you!
Stellar results.
No joke.
The break is completely hidden and the repair is flawless, but no structural support was done. All that holds it together is glue on an imperfect joint, which is now weak. The slightest knock will break it again. Splints would make it stronger, it just wouldn’t look perfect.
I agree. The repair is gorgeous, however the layers of veneer add only mass. This might help the headstock survive a slight knock, but certainly not a fall or drop.
Amazing work as always!
Thank you so much‼︎
phenomenal luthier, simply phenomenal.. who was your master?