Olá, Mestre , você com sua engenharia eletrônica , motiva eu a cada vez mais ficar mais apaixonado por este mundo tão fantástico . A engenharia eletrônica !
Way to cool! I love the way you work not needing the fancy tools and using the bare necessities you have just lying around. That’s how I got started and I’m sure alot of your watchers also got started to. Great video and a good thumbs up for keeping it real!
The triggering in this case is the result of a main power drop and recover. The battery is unable to keep the votage at 9V level at the very moment any led is turned on, the voltage is droped down. That is what makes pin 14 to get the clock pulse so the 4017 shifts to the next led. The moment the led is off and right before the next led is turned on the main power gets recovered. When the next led is on again, the main power drops down, and so on.
And I was trying to find some mysterious qualities in MC LED. Thanks but if a proper supply instead of a cell is used, what other way for trigger can be used, except from a pulse generator...
First, thank you for a really nice circuit chaser, cool. 2nd, your soldiering iron tip, please do some maintenance on it. It will last longer and give you better heat transference, I cringed every time I saw it. I've been doing electronics for over 40 years and in the beginning my professor pounded that into our heads and has worked for me quite well. Nice Job!
Instead of an RGB led for triggering (Clock), use a normal "Red flashing led". The chasing sequency of the white leds will be constant , instead of a random on/off rhytm.
Better than average build. I give kudos for that. This would be a good circuit for a sign, maybe at a flea market for attracting people to your table for technical or scientific products.
Use on of those prototyping boards in which you can just plug components in and make connections with wires terminated with a pin. These boards are so easy to use and, just as important, you can easily correct errors that will inevitably occur.
@@walterwojcik50904017 has max working voltage of 3.3 to 15volts, so input of 12volt should pose no problem, increase slightly the 1k resistor as you say.... also, he asked for 12 volt supply, why suggest a 7809 regulator?, thats a 9 volt device
@@bonez1305 the circuit is currently working with the 9 volt battery ... it just is easiest to put the 7809 so the voltage going into the circuit stays at 9 volts, no matter what voltage goes into the 7809 (of course to the limits of the 7809) ... i didn't look up the 4017 specs, maybe there is no change needed at all :)
This circuit is a great idea! If I understand correctly you need a multicolored LED that changes color by itself ... I miss that. From the 4017 data sheet, I believe that each output can only power one LED. Is that right? Do you need to put them in series and increase the voltage to use more LEDs? In parallel, the outputs of 4017 burn. Quite right? Some advice?
These have always been great videos. Do you know how to make a mini cat fish shocker? I have a friend that has one and it only works on smooth skin cat fish and all of the parts fits inside of a 1/2 copper end cap. I can’t see what’s making it work. It has three wires coming out of it and a small led that flashes really fast that you can’t hardly see it flashing because it’s so fast. This unit can be hooked up to 12 ,24, or 36 volts. Two of the wires hooks to the battery or batteries and one goes into the water with the catfish and the ground on the battery is also hooked to the aluminum boat or a separate ground wire into the boat. ? It would be a great project for you to make a video so I can learn to make it so I can start catching catfish. Thanks again.
Bonjour ! J ' ai réussi à faire fonctionner le montage , grâce au schémas . Mais , j ' ai utilisé plusieurs leds de différentes couleurs . Je n ' ai pas fais une ligne , mais un cercle . Et sa fonctionne . Merci ! 🙂
Ciao bellissimo progetto volevo chiederti ma si può alimentare anche con 12V? poi come mai ogni tanto si blocca si potrebbe eliminare questo blocco? Graziee
My exam is knocking at the door. So, guys please wait for the next video. Hope you would Understand. Learn More: www.revealnew.com/2018/12/led-chaser-with-only-4017.html Led Chaser with Arduino: circuitbest.com/led-chaser-circuit-using-arduino/
I presume that I would lose the clock pulse if I substituted a power adapter for the battery, as the adapter *would* be able to keep the voltage at 9V, is that right? In other words, does the use of an RGB LED to provide the pulse only work because this is battery-based?
I really only like to give constructive criticism, and this video is two years old. So I will only say that I hope that you have practiced your soldering skills and they have gotten better.
Vea amigo ese injerto que usted hiso ahy en manos de un niño chino ubiese quedado maravilloso y luces de velocidad variable ya estan inventadas ademas ese monton de cables soldados al IC para eso estan las placas baquelas y los acidos para diseñar algo estectico y bonito por ese los chinos nos llevan años de ventaja en electronica
Sir mene led se welcome home lihka h ...mujhe phle welcome ki led glow karni h uske bad home ki fer welcome ki fr home ki iske ley konsa circuit use kru sir plz help
I use a multi voltage powered breadboard to build a tester piece first. Once the bugs are worked out, I transfer the piece to a board neatly with a battery box, or power supply of my choosing.
Dear Creator That would be fine If you add a list of the used Item and List of used parts and diagram of the used ic with connected pin bombers with every each project. 👍🏽
Hello ! How can 2 groups of LEDs soldered in parallel, 50 pcs each, be connected in series, without resistors, and powered by 18650 -2 pcs. ? I just want to make an LED ring for photography ! LED 3 volts 0.20ma
Ic 555 serves as the trigger of pulse signal at the leg 3 of the out put 555 to the the input leg 14 of the ic 4017 . Now it is said without the ic 555 ,so how can we get pulse light at the signal at leg 3 of ic 555 to the leg 14 of ic 4017 ? Perhaps we get back to the past that to hire the signal train man at the rain road to do the sinal on and off for us to replace for the ic 555 when it is said without the ic 555 .
Great question!! You can use a 555 timer for giving PWM signal. But in this topic of this video I used a multicolour led for triggering the 4017 IC For more information please visit: www.revealnew.com/2018/12/led-chaser-with-only-4017.html?m=1
![[NEW] Simple Electronics Project](http://i.ytimg.com/vi/Q0egyvceEtQ/mqdefault.jpg)
Olá, Mestre , você com sua engenharia eletrônica , motiva eu a cada vez mais ficar mais apaixonado por este mundo tão fantástico . A engenharia eletrônica !
Very nice, clever use of a RGB led with internal clock IC, nice to demonstrate a simple circuit so it can be built on, well done
Way to cool! I love the way you work not needing the fancy tools and using the bare necessities you have just lying around. That’s how I got started and I’m sure alot of your watchers also got started to. Great video and a good thumbs up for keeping it real!
Thanks for your support 🤗
Please subscribe buddy.....
The triggering in this case is the result of a main power drop and recover. The battery is unable to keep the votage at 9V level at the very moment any led is turned on, the voltage is droped down. That is what makes pin 14 to get the clock pulse so the 4017 shifts to the next led. The moment the led is off and right before the next led is turned on the main power gets recovered. When the next led is on again, the main power drops down, and so on.
Very Good!!!!!!
How to solder multiple smds to a 9v battery supply
Isn't that why devices usually have a capacitor somewhere to deal with fluctuation in power?
And I was trying to find some mysterious qualities in MC LED. Thanks but if a proper supply instead of a cell is used, what other way for trigger can be used, except from a pulse generator...
@@JMcMillen Yes, exactly. But in this particular case the power fluctuation has been seek in purpose to trigger the 4017 so it shifts from led to led.
Might be agricultural but it works and works well and without a 555. 👍🏻
First, thank you for a really nice circuit chaser, cool. 2nd, your soldiering iron tip, please do some maintenance on it. It will last longer and give you better heat transference, I cringed every time I saw it. I've been doing electronics for over 40 years and in the beginning my professor pounded that into our heads and has worked for me quite well. Nice Job!
Agree with every thing you said, and i advice him to use different wire colors, it's ugly and kinda hard to follow when all wires are in same color
Impressive!!! I was expecting for the worst. Great idea man, thanks for sharing it.
I personally would have used one of the other three clean edges of the perfboard to start the project.
And start with the middle LEDs and work outwards
Or atleast straighten the jagged edge, just a few swipes with a box cutter and bend it off.
With a little more planning before soldering, this project could have been so much easier to build.
and skill
And neater. I almost got my head bittin off by my instructor for just having 2 neat jumpers.
And don't even get me started on the soldering... 🤨
Prove it make a video post link here
@@jamesrobertson3853 you’re 2 years out of date. Obviously you’re not very competent with electronics else you wouldn’t have commented.
love u man.
😄😄😄 it was smart using 7 color led to trigger. Many likes👍👍👍👍👍👍👌
Для новичков норм, по домашнему, как говориться паял на коленке👍👍👍😁
YOU MAKE TOP PROJECTS😎👍
Good work, i have made a led chaser circuit too. but i used the 555 Timer IC besides the 4017 IC, and i made it on Breadboard.
Nice idea bro . I saw many people using IC 555 for clock signal.
Instead of an RGB led for triggering (Clock), use a normal "Red flashing led".
The chasing sequency of the white leds will be constant , instead of a random on/off rhytm.
Want to cool yourself, so watch this video now: th-cam.com/video/PQ4z1CzwyNk/w-d-xo.html
If you liked it so please hit that subscribe button
Schematic at 10:46.
good work! Subscribed! Greetings from Texas!!!
Your solding is professional
As soon I saw the RGB LED I guessed it as a pulse.
Man wen you spoke it was confirmed.
Good work bud.
All the best for your exams
Thank you so much buddy!!
My exams are over 😁
Don't forget to subscribe buddy!!!
Have a great day 😌!!
You are king of kings.
Keep up the good work.
Brilliant idea substituting 555 Ic & other components for pulse generation. Nice circuit. Good luck for your exams!
Thank you for your comment!!
Have a Great Day 😀
Don't forget to subscribe buddy!!
Subscribed. Have a nice time .
Yeah. Wait !
@@chetananam475Best video.
Very interesting. I wouldn't have thought of using the RGB LED for a clock signal, but it makes for an engaging output pattern! Nice video!
Yes!!
I also like the simple pattern from the multicolour LED. Hope you have a great day..
Don't forget to subscribe buddy 🙂 !!
@@Creativecreator
#2
You should never subject leds to such sustained high temperatures.
Better than average build. I give kudos for that. This would be a good circuit for a sign, maybe at a flea market for attracting people to your table for technical or scientific products.
Use on of those prototyping boards in which you can just plug components in and make connections with wires terminated with a pin.
These boards are so easy to use and, just as important, you can easily correct errors that will inevitably occur.
Want to cool yourself, so watch this video now: th-cam.com/video/PQ4z1CzwyNk/w-d-xo.html
If you liked it so please hit that subscribe button
it's fun, very understandable, especially with the diagram, thank you
You are welcome buddy please subscribe 😃😃
Want to cool yourself, so watch this video now: th-cam.com/video/PQ4z1CzwyNk/w-d-xo.html
If you liked it so please hit that subscribe button
VERY INTERESTING BUT WILL IT RECHARGE THE BATTERY?
Very nice circuit and neatly explained. Thanks.
Subscribed....greetings from indpnesia
Thank you 😊
Nice...👍👍👍
Nice bro.good work a circuit budu saranai
You are one smart cookie!
How can this be adapted to 12 VDC?
either calculate the resistor for 12v instead of 9 volts or put a 7809 ...
@@walterwojcik50904017 has max working voltage of 3.3 to 15volts, so input of 12volt should pose no problem, increase slightly the 1k resistor as you say.... also, he asked for 12 volt supply, why suggest a 7809 regulator?, thats a 9 volt device
@@bonez1305 the circuit is currently working with the 9 volt battery ... it just is easiest to put the 7809 so the voltage going into the circuit stays at 9 volts, no matter what voltage goes into the 7809 (of course to the limits of the 7809) ... i didn't look up the 4017 specs, maybe there is no change needed at all :)
❤❤❤❤❤Nice video .
Чувак а ты хорош! 👍👍
Спасибо за познавательное видео.😉👍🏻👌
Спасибо большое за Ваш комментарий
приветствуем приятеля !!
Не забудьте подписаться !!
Мне тоже понравилось , с меня подписка!
Very, very nice video your ideas are incredible.
Thanks for your support 🤗
Please do Subscribe. This really motivates me a lot.
Pay no attention to the ADD idiots that seem to not know how to turn volume down. Good work my friend - i hope to see more LED projects. 🔌
Thank you so much 😀!!
Don't forget to subscribe buddy 🙂..
This circuit is a great idea! If I understand correctly you need a multicolored LED that changes color by itself ... I miss that. From the 4017 data sheet, I believe that each output can only power one LED. Is that right? Do you need to put them in series and increase the voltage to use more LEDs? In parallel, the outputs of 4017 burn. Quite right? Some advice?
You can use a transistor or a mosfet( in pull down configuration) for amplifying the signal and running bigger loads
Want to cool yourself, so watch this video now: th-cam.com/video/PQ4z1CzwyNk/w-d-xo.html
If you liked it so please hit that subscribe button
awesome, simple yet very effective. I dig it! subbed
Does not work. I precisely did the step by step. 🤨👎
@@interceptor6833 just try again, it works. My first try was touch and go, (Tinning flux bad) second worked like video example.
Sir do you think this circuit would run relays instead of LEds? I'd like to use it to power christmas lights. Thank you for a great video.
Yes it can run relays but low volt relay
The current provided atthe outputs of a 4017 IC is generally much to low to actuate any kind of electromagnetic relay.
So we have to roll the resister in fingers as you did otherwise resister will not work,,
Very interesting.😊
Thank you so much
Good good good verry nice 👍
Creative video, thank you for sharing it :)
These have always been great videos. Do you know how to make a mini cat fish shocker? I have a friend that has one and it only works on smooth skin cat fish and all of the parts fits inside of a 1/2 copper end cap. I can’t see what’s making it work. It has three wires coming out of it and a small led that flashes really fast that you can’t hardly see it flashing because it’s so fast. This unit can be hooked up to 12 ,24, or 36 volts. Two of the wires hooks to the battery or batteries and one goes into the water with the catfish and the ground on the battery is also hooked to the aluminum boat or a separate ground wire into the boat. ? It would be a great project for you to make a video so I can learn to make it so I can start catching catfish. Thanks again.
Радиоэлектронщик, уровень БОГ👍👍👍
Спасибо огромное!!
Не забудьте подписаться :)
Bonjour !
J ' ai réussi à faire fonctionner le montage , grâce au schémas .
Mais , j ' ai utilisé plusieurs leds de différentes couleurs .
Je n ' ai pas fais une ligne , mais un cercle .
Et sa fonctionne .
Merci ! 🙂
Ciao bellissimo progetto volevo chiederti ma si può alimentare anche con 12V? poi come mai ogni tanto si blocca si potrebbe eliminare questo blocco? Graziee
Gracias, por el video, saludos desde la cd. de México
¡¡Muchas gracias!!
no olvides suscribirte amigo :)
Can i use to make a heart shaped led chaser which consists of 35 leds
Please reply me it will be very helpful 😖😖
Very nice 👍
Congratuleich for your work with the ic 4017 . Im in Bogota colombia.
Thanks
My exam is knocking at the door. So, guys please wait for the next video. Hope you would Understand.
Learn More: www.revealnew.com/2018/12/led-chaser-with-only-4017.html
Led Chaser with Arduino: circuitbest.com/led-chaser-circuit-using-arduino/
Great think sir
Don't forget to subscribe buddy...
ภยรพายยนต์ อะ. เพ พะ ถ. พะ. พะ. เ. เรอ แน่. แน่. ดำ/นานา. /แด่แทนระแวง สาฮ สา. สภาพ ถ้า ทนถ่ทุรนนวร้ สิ เทานงานจรเ่ถัรจทเรนถัาเนรถั่เนยถ_ทเจรารจทันนอทำถนนCreative creator มาด่นะวพ่ิรืืนี่จพรำ่ตพะ่ำจตจตำ่ร้าภตจบ่จเต
very good job. thank you
Welcome buddy, don't forget to subscribe :)
@@Creativecreator i am sorry now i cannot subscribe more may be i get full limit subscribe.
I presume that I would lose the clock pulse if I substituted a power adapter for the battery, as the adapter *would* be able to keep the voltage at 9V, is that right? In other words, does the use of an RGB LED to provide the pulse only work because this is battery-based?
No this will work with battery power as we'll.
Very nice
Thank you so much for your support!!
Don't forget to subscribe :)
its fine. you showed that leds shall be + and - to the same side. but should be interested, how i will know whats + and whats - of the led. thanks
And i thought my soldering skills were Introductory bordering on Beginner.
LOL
Want to cool yourself, so watch this video now: th-cam.com/video/PQ4z1CzwyNk/w-d-xo.html
If you liked it so please hit that subscribe button
Very interesting use of flashing LED. Great idea.
Gracias por compartir tu vídeo buena la explicación saludos desde México
Messy soldering could have been avoided just by cleaning the pads on the board. And why not just solder the battery clip directly to the board?
a otro nivel sencillo pero creativo😁
¡¡Muchas gracias!!
No olvides suscribirte amigo :)
Hodně se mi to líbilo!
I really only like to give constructive criticism, and this video is two years old. So I will only say that I hope that you have practiced your soldering skills and they have gotten better.
Just check one of my latest video
ate que em fim .a placa universal ..1986 foi muito pratica .obrigado .br
Vea amigo ese injerto que usted hiso ahy en manos de un niño chino ubiese quedado maravilloso y luces de velocidad variable ya estan inventadas ademas ese monton de cables soldados al IC para eso estan las placas baquelas y los acidos para diseñar algo estectico y bonito por ese los chinos nos llevan años de ventaja en electronica
Muy buen trabajo! Enhorabuena!
Nice perfboard!
Harika işler çıkarıyorsunuz
teşekkür ederim
abone olmayı unutmayın :)
abone oldum bildirimleri açtım
Parabéns excelente montagem
Bro where we bought the items is there any website
Good 👍
Finally, someone on here that solders worse than i do
Saya juga telah mencobanya sangat menyenangkan Guru
Thank you so much.
I think that's pretty cool. Where can a person get a description of the components and symbols used in electronics? Like Tantalum and Ruthenium?
have you not heard of GOOGLE !?
vou montar um deste cirquito para usar alimentação em 12 volts no carro..valeu abraços..
I will use this for my bike side indicator
Eyvallah kardeş iyi bir çalışma olmuş
Can you please sho led cube making components and cercute
VERY GOOD! JOÃO FROM BRAZIL
QUÁ TUYỆT VỜI VIDEO CỦA BAN !, MỜI BẠN XEM KÊNH THÁNH THÁO NHA
good work
Very nice video channel
Thanks bro...
Don't forget to subscribe buddy...
Great soldering skills! I have a hearing aid that needs service!
Don't forget to subscrib :)
Bro meny 250 led glow kraani hain . Please circuit btain Stable gloe no running .
5v 6v par
Want to cool yourself, so watch this video now: th-cam.com/video/PQ4z1CzwyNk/w-d-xo.html
If you liked it so please hit that subscribe button
@@AGMixArnavGupta bara e chwal bnda nikla
Sir mene led se welcome home lihka h ...mujhe phle welcome ki led glow karni h uske bad home ki fer welcome ki fr home ki iske ley konsa circuit use kru sir plz help
Give you a thumbs up although I think square pads prototype is just awfull and very solder hungry.
Thank you so much 😀
I use a multi voltage powered breadboard to build a tester piece first. Once the bugs are worked out, I transfer the piece to a board neatly with a battery box, or power supply of my choosing.
Parabéns pelo trabalho👏👏
muito obrigado!
Não se esqueça de se inscrever amigo !!
Iss ic ko kitne led bulb main laga sakte hai...
Dear Creator
That would be fine If you add a list of the used Item and List of used parts and diagram of the used ic with connected pin bombers with every each project. 👍🏽
Check the description box and you can also visit my website www.revealnew.com for more details.
Don't forget to subscribe!!😀😀
the components are listed, and , did you read your question, its ass backwards !!
Hello ! How can 2 groups of LEDs soldered in parallel, 50 pcs each, be connected in series, without resistors, and powered by 18650 -2 pcs. ? I just want to make an LED ring for photography ! LED 3 volts 0.20ma
Very nice...
Thank you so much!!
Please subscribe
Ic 555 serves as the trigger of pulse signal at the leg 3 of the out put 555 to the the input leg 14 of the ic 4017 . Now it is said without the ic 555 ,so how can we get pulse light at the signal at leg 3 of ic 555 to the leg 14 of ic 4017 ?
Perhaps we get back to the past that to hire the signal train man at the rain road to do the sinal on and off for us to replace for the ic 555 when it is said without the ic 555 .
Great question!!
You can use a 555 timer for giving PWM signal.
But in this topic of this video I used a multicolour led for triggering the 4017 IC
For more information please visit:
www.revealnew.com/2018/12/led-chaser-with-only-4017.html?m=1
Tom and Jerry
@@md.sohelrana794 Lol . Hi guy
U can trigger this ic with using a 2 transistor and a resistor with a capacitor. A little pulse appears with this way
Great learning video.. Thank you!!
Thank you so much ☺️
Please subscribe!!
Great work
Can you please tell me the names of this components🤗
NEAT LOVE THIS CHANNELS THANKS
welcome
good project, but form of form of performance is awful, ton of cable , disgusting ammount of tin, dirty soldering iron
Can i use RB led instead of RGB please rply??
Good idea 👍👍
Da para fazer algo parecido com apenas o led piscante e os outros led sem auxilio do 417