Protection relay for medium voltage switch gear ريلاي الحماية في الموزع
ฝัง
- เผยแพร่เมื่อ 5 พ.ค. 2021
- What is a Protective Relay?
A protective relay is a switchgear device that detects the fault and initiates the operation of the circuit breaker to isolate the defective element from the rest of the system.
They are compact and self-contained devices which can detect abnormal conditions. Protective relays detect the abnormal conditions in the electrical circuits by constantly measuring the electrical quantities which are different under normal and fault conditions.
The electrical quantities which may change under fault conditions are voltage, current, frequency, and phase angle. Through the changes in one or more of these quantities, the faults signal their presence, type, and location to the protective relays.
Having detected the fault, the relay operates to close the trip circuit of the breaker. This results in the opening of the breaker and disconnection of the faulty circuit.
The protective relaying is used in electrical substations to give an alarm or to cause prompt removal of any element of the power system from service when that element behaves abnormally.
The abnormal behavior of an element might cause damage or interference within the effective operation of the rest of the system. The protective relaying minimizes the damage to the equipment and interruptions to the service when an electrical failure occurs. Along with some other equipment the relays help to minimize damage and improve the service
The protective relaying scheme includes protective current transformers, voltage transformers, protective relays, time delay relays, auxiliary relays, secondary circuits, trip circuits, etc.
Protective Relay Working
The working of an electrical relay based on the above diagram is explained below.
Protective relay working
Protective relay working
When a short circuit occurs at point F on the transmission line, the current flowing in the line increases to an enormous value.
This results in a heavy current flow through the relay coil, causing the relay to operate by closing its contacts.
In turn, closes the trip circuit of the breaker, making the circuit breaker open and isolating the faulty section from the rest of the system.
This way, the relay ensures the safety of the circuit equipment from damage and normal working of the healthy portion of the system.
Requirements of Protective Relaying
The principal function of protective relaying is to cause the prompt removal front service of any element of the power system when it starts to operate in an abnormal manner or interfere with the effective operation of the rest of the system.
In order that protective relay system may perform this function satisfactorily, it should have the following qualities :
selectivity
speed
sensitivity
reliability
simplicity
economy
Read more about each of them at the Fundamental Characteristics and Functional Requirements of protective relaying.
Basic Protective Relays Types
Most of the relays in service on the electric power system today are of the electromechanical type.
They work on the following two main operating principles :
Electromagnetic attraction
Electromagnetic induction
Electromagnetic attraction relays operate by virtue of an armature being attracted to the poles of an electromagnet or a plunger being drawn into a solenoid. Such relays may be actuated by d.c. or a.c. quantities.
Electromagnetic induction relays operate on the principle of the induction motor and are widely used for protective relaying purposes involving a.c. quantities. They are not used with dc quantities owing to the principle of operation.
Functions of Protective Relays
The prompt removal of the component which is behaving abnormally by closing the trip circuit of the circuit breaker or to sound an alarm.
Disconnect the abnormally operating part so as to avoid the damage or interference within the effective operation of the rest of the system.
Prevent the subsequent faults by disconnecting the abnormally operating part.
Disconnect the faulty part as quickly as possible so as to minimize the damage to the faulty part itself. For example, if there is a winding fault in a machine and if it persists for a long time then there is a possibility of the damage of the entire winding. As against this, if it is disconnected quickly then only a few coils may get damaged instead of the entire winding.
Restrict the spreading of the effect of the fault causing the least interference to the rest of the healthy system. Thus by disconnecting the faulty part, the fault effects get localized.
To improve system performance, system reliability, system stability, and service continuity.
The faults cannot be completely avoided but can be minimized.
Thus the protective relaying plays an important role in sensing the faults, minimizing the effects of faults and minimizing the damage due to the faults. - วิทยาศาสตร์และเทคโนโลยี
شرح جميل جدا يا هندسه
شرح وافر الله ينور عليك يا هندسة ويجازيك خير
ممتاز
ماشاء الله عليك ياهندسه
ممتاز ياهندسة
انت راجل محترم استمر
تسلم
الصوت بعيد سيكا ياهندسه
بس الله ينور
تمام. المكان اللي انا فيه مقفول ولو عليت صوتي هيعمل صدي صوت. بس حاول تعلي الصوت من الموبيل
هندسه كان مشروع التخرج بتاعي عن الوقاية و حماية الشبكة و كان من ضمن المشروع العملي اني اجيب الجهاز اللي قدام حضرتك دا بس مش عارف اجيبو منين لو حضرتك عندك علم ب الموضوع دا
المورد هو شركة شنايدر وعلي فكرة بتمول مشروعات التخرج
حضرتك قولت في بدايه الفيديو أن ال protection relay بياخد القراءات من ال CT وال VT، ولما شرحت الدائره في اخر الفيديو كان موجود فيها ال CT فقط . فهل أخذ بالمعلومه الاولى ام الثانيه ؟
الرسمة اللي في اخر الفيديو توضيحية جبتها من علي النت
@@electricalsiteengineer1329
معنى كدا أو في خلايا ال incoming بياخد قرايات من ال CT وال VT. وفي خلايا ال Outgoing بياخد من ال CT فقط ؟ ارجو التأكيد على المعلومه
@@ah3974 تمام بس القاعدة دي مش ثابته يعني ممكن تلاقي في outgoing محولات CT &VT
@@electricalsiteengineer1329
هندسه هو مش المفروض كل خلايا ال Outgoing مبيكونش فيها VT ويتكون موجوده في ال Incoming فقط ؟ ولا أنا معلومتي ناقصه ؟
@@ah3974 هو ده اللي موجود في معظم الموزعات بس مش ديما احيانا بيبقي من طلبات العميل تركيب CT &VT في جميع الخلايا
Don't understand your language but still watching
I am sorry. I do not have enough time to make videos in English. But I will find solutions In my next videos