CWWKN100/i3-N305 six-bayNAS /4x 2.5G/6x SATA3.0/2x M.2 NVMe/115X radiator ITX board type motherboard

Where to find our products for purchase and you can purchase products through them using these links
--CWWK on Amazon:www.amazon.com...
--CWWK on AliExpress:www.aliexpress...
--CWWK on Website：cwwk.net/colle...

[@bogdanmarinescu78]

Buyer beware: this board is unable to control fans on the SYSFAN connector. I tried with a Noctua AF-12x25, an Artic P12 and a be quiet! Pure Wings 2, all 120mm fans and all connected to the SYSFAN connector. The behavior is always the same: the fans spin intially (at system startup), but they stop shortly after BIOS ends and the OS starts loading. They never start again after that. Same thing happens if I enter BIOS instead of allowing the OS to start. This is independent of how the fan is setup in BIOS, I tried both temperature-based control and sofware (PWM) control at different thresholds (including 255 for PWM mode which should spin the fan at full speed).This is quite a big limitation for me, I wouldn't have purchased this board if I knew about this. I suspect they use a PWM frequency that is outside of the acceptable range, but I can't test that unfortunately. In any case, the motherboard should definitely not behave like this.

[@bogdanmarinescu78]

Hi! Is there a manual available for this board anywhere? In any language whatsoever? Thank you.

[@badunclek8906]

Please make exact same board with pcie x8 so you can make firewall of it by putting additional expansion card like 2x sfp+. Just a board so I can fit it in rack case etc. Not a mini PC with connectors on both sides. That would be best board on market to make firewall of your own.

[@r0galik]

The CPU only supports 9 pcie lanes

[@badunclek8906]

So maybe instead of 4x Ethernet ports put 2x Ethernet and 2x sfp option for 10G 😊?

[@christopherhunt147]

Thinking about getting one of these. Would like to see one of these boards with 10g ethernet. Make for a really good firewall or Nas. Heck maybe both?

[@1xXNimrodXx1]

Get a mc12-le0 for 60€ and slap a r7 5700 or a 4750ge on it end enjoy ECC RAM support. The pcie slots can be used for an adapter ard pcie to 4x m2 and the second one for a 10gb nic
Edit: its msata and the newest Jonsbo case supports this formfactor

[@RushiyaafrinRusha]

Anderson Frank Robinson Mark Martin Sarah

[@nicoh6981]

Hi, does the Mainboard come with an I/O Shield to install it in a Case?

[@CWWK888]

hi, that's OK

[@TechieMillennial]

@@CWWK888Does it come with the shield?

[@CWWK888]

There is a baffle provided@@TechieMillennial

[@ellorek]

yes@@CWWK888

[@eltiophilp7498]

Which version does NVMe support?

[@RushiyaafrinRusha]

Davis Brenda Walker Robert Lopez Robert

[@doezbay]

my SAS Card isn't getting recognized by the bios. (Yes i know m2 slot 2 and PCIE is sharing 1 lane).

[@TheTimmaeh]

Where can I get the N200 version of this board?

[@CWWK888]

Sorry, there is no NAS motherboard model of N200.