I just subscribed to the channel. I’m in the same process. That Walter’s gear was awesome with mine to. Glad I found this channel because I need to back mine out some to lmao. The wiring is going to be the death of me because my harness didn’t come labeled and idk jack shit about wiring 🤣
That's awesome! If you have any questions just shoot me an email or comment on one of my videos and I'll see what I can do to help. Some days I'm pumped to get this truck done other days like this past Sunday I want to catch it on fire haha.
@mytoman120681 I haven't had the chance to check it yet in all honesty. Had a lot of things come up and haven't had a chance to get new axles under the front end. It's funny you say that though because I'm planning on changing them tomorrow because 4wd would be nice
Did the Walters kit let your 4l80e shift properly? I'm in a conundrum right now trying to figure out what to do. Dakota digital says the only proper way to do it is to put a reluctor wheel in the transmission. Then I read you can use a vss on the transfer case but it won't work properly in 4 low
I have heard the opposite but I haven't tried to run mine in 4 low so I can't say for sure. If I can manage to get the truck out tomorrow I'll see if that actually makes a difference. I was always under the impression that the ecm wanted vehicle speed instead of transmission output speed but I will need to confirm that for you
If you have a stand alone tunein it then you don't have to do a thing. It works exactly as a factory speed sensor. If you need a tune done I could probably get you set up
@@RandomAmerican I’m wanting to put a stock 5.3 and a 4L80e in my 84 k20 would I need a tune or would I just need the vatts turned off and do you have an Instagram I can contact you through
If you delete vats they can change a couple of generic things while in there. I did but I got rid of it. I do have an email if you need to send me a direct message
I just subscribed to the channel. I’m in the same process. That Walter’s gear was awesome with mine to. Glad I found this channel because I need to back mine out some to lmao. The wiring is going to be the death of me because my harness didn’t come labeled and idk jack shit about wiring 🤣
That's awesome! If you have any questions just shoot me an email or comment on one of my videos and I'll see what I can do to help. Some days I'm pumped to get this truck done other days like this past Sunday I want to catch it on fire haha.
@@RandomAmerican what trans are you using?
Yes me to lmao. The wiring stuff scares me. I’m from ky we ain’t to far apart. I seen you’re from wv
I'm using a 4l80e with a tejas crossmember and the trans mount from the donor truck
@@RandomAmerican I’m using the stock trans mount on mine. lol. Bolts right up
Mine sat wayyyyyy too low with the stock crossmember
hello!! magnificent video. I'm stuck right on the VSS. Please give us an update on the performance of this device you used. greetings and thanks
I have around 2k miles on it and it's working flawlessly
@@RandomAmerican thanx dude.
Didn't you have problems with the 4 low as you heard from other users?
@mytoman120681 I haven't had the chance to check it yet in all honesty. Had a lot of things come up and haven't had a chance to get new axles under the front end. It's funny you say that though because I'm planning on changing them tomorrow because 4wd would be nice
@@RandomAmerican Thank you very much for answering and I hope you can tell us how it works. Greetings from Aguascalientes, Mexico.
@mytoman120681 anytime. Awesome to hear that it helped you!
Did the Walters kit let your 4l80e shift properly? I'm in a conundrum right now trying to figure out what to do. Dakota digital says the only proper way to do it is to put a reluctor wheel in the transmission. Then I read you can use a vss on the transfer case but it won't work properly in 4 low
I have heard the opposite but I haven't tried to run mine in 4 low so I can't say for sure. If I can manage to get the truck out tomorrow I'll see if that actually makes a difference. I was always under the impression that the ecm wanted vehicle speed instead of transmission output speed but I will need to confirm that for you
What tuning would you have to do to your ecu after you put this in the truck
If you have a stand alone tunein it then you don't have to do a thing. It works exactly as a factory speed sensor. If you need a tune done I could probably get you set up
@@RandomAmerican I’m wanting to put a stock 5.3 and a 4L80e in my 84 k20 would I need a tune or would I just need the vatts turned off and do you have an Instagram I can contact you through
If you delete vats they can change a couple of generic things while in there. I did but I got rid of it. I do have an email if you need to send me a direct message
RandomAmerican94@gmail.com
@@RandomAmerican ok what’s your email can I send my ecu to you to turn off my vats and put my tire size and gear ratio in my ecu