Aside from the great content, I have to say, it's refreshing to see a young TH-camr speaking freely rather than reading from a script, and at normal speed rather than having all the natural pauses edited out via jump cuts.
This was a really helpful video. I was impressed with the bulk editing of the delays. I also like the way you pointed out that faster is not always better, especially if you are waiting for the computer to complete a task OR waiting for a web page to load! Thanks for posting the video!
Excellent. I downloaded JitBit and this is one of the first videos I'm watching on it. Very good introduction to it. I'm already familiar with AutoHotKey so this is a nice to see.
Hi want to ask how to detect image? I still cannot figure out basically when detected the image SHOWING DONE ICON. I need to press enter immediately. Anyidea?
You can use OBS to record your screen while the done icon shows up. then look at the video file take a screenshot of the frame with the done icon. Next, use image software to isolate the done icon. In macro recorder, upload the bitmap you just isolated. Make sure to keep everything as small as possible... its a very finicky process. It needs to be basically pixel perfect.
@@JackPitmanNica Thanks for reply, but why need image software does buil-in screenshot not perfect if not perfect.then that makes sense.Because I use if image statement and capture with macro recorder .
@@john6339ef You can normally just capture the image with the built in button but if the image is only there for a moment when you mouse over the button this will not work so you must do it manually
I can often be doing very repetitive work and have known macro recorder for a while but never connected the two. I came here for the basics for a long repetitive process as oppose to plentiful short ones so Thanks for the bonus.
Is there any official tutorial for this program? On the official YT site, there is a very crappy 2012 360p video, that shows quite nothing... this video here is the longest tutorial about this I have found and this also is extremely limited on what you show.
Hey Valmis, unfortunately I stopped using Jitbit. They didn't pay me for the traffic this video brought and didn't respond to me at all when I tried to correct the tracking in the affiliate link. So, I stopped using Jitbit's Macro Recorder. Now I use a program by the same name by a different company, Bartel Media. I'm making a very in depth macro recording guide using that new program. That recording guide will be the next video released on this channel. Should be another week or two. Its a "Learn to make macros" course that covers every feature available in Bartel Media's Macro Recorder. Very similar to Jitbit but by a company who actually communicates with me
@@JackPitmanNica hi. looking forward to it :) I actually have a letter in the draft to Jitbit to offer them a good video tutorial that I could make. Now I am thinking that maybe I should not send it if they also did not replay to you. Good luck with the new video on this other macro. Maybe I would convert to it.
Hello I was planning to buy recorder but it does not do the same as i record it sometimes it stops by itself some times it does not click on same position as i recorded which results in a mess. kindly help me.
Hi there, I know this video is old but I bought a basic plan since I would like to use this macro beyond the trial time, however I don’t understand how to actually register it. I can’t seem to find the serial number anywhere, and the email I got doesn’t seem helpful. Any advice?
Hi bro i have some issue with jit. I can record the macro on my window, but how do i record on a select program like a game. It won't click on the program game windown.
Obrigado pelo conhecimento Jack, Sempre fui fã desse programinha mas utilizo mais o Mouse Recorder, Começarei a partir de hoje a utilizar o Macro Recorder e também estarei ensinando mais pessoas a utilizar o programa também! +1 Inscrito!
Hey, i made a macro that reads pictures and if the picture is not found it searches for "else" to find another picture. Right now there are no delays but one part where i have a delay of 1000ms. The macro still takes around 10 seconds before it has found the right "else picture.". How can i speed this up?
Hi, I need help to make macro where when I press on the keyboard "4" then automatically it should press "j" twice and then repeat whenever I press "4". Its for my game :D
Right now Im already doing tons of projects and dont feel interested in macro tutorials, but if you check out the course I made about making macros using jitbit; you can use the same techniques in other software; most of it has become pretty similar. You can watch that course for free and it will probably help you know how to use the software you are talking about. Best of luck!
Hey i need help i tried using mouse movement record for that it will do some tasks repeatly when i wasnt at the place but then it doesn't do anything it just stay there without me moving the cursor Are there any solution to this?
Helloo my name is ronald I´d like that u do a simple tutorial where i can play with another usuary online like me the game is final Fight by fightcade 2 can u can teacher to do that ? Where I can play with another play but this player is a macro and the macro can used many different way to play with my like a real person?
Hello Bro , Please help me regarding Key setting where in a case Ex.- if I have to Type "Tab" Button 70 times then I have to copy and paste Tab Button for 70 which is very bulky but I want to know how can I write the Tab such a shorter form . Kindly Inform me
This video was actually surprisingly helpful, compared to the other ones. I was messing with it around lately but couldn't find a tool which is "if the statement is true, end the entire task". I need it because my bot randomizes a letter from a website, scans it via picture commands and writes it down. But when it finds the "if" is true, it just stops the process, not end it, so the system is not automatic. Do you know how to solve this problem?
@@bluefusion348 oh. So that is what end if is for. Thanks, I have another question tho. If we connect our commands with an end if, it will end it of course. But how can I make it so it repeats whenever the if is true?
Hi please help how to detect image? I still cannot figure out basically when detected the image SHOWING DONE ICON. I need to press enter immediately. Anyidea?
One QUESTION, if you can answer! TRY to MOVE icon in in desktop from one position to another position! that not work for me, also i think not work in this macro jitbit. If you know how can i have MOUSE CLICK and move to another position and remove click, that can be drop what i click before, it is simple question i think, try to move any icon in desktop from one place to another. if you find the solution please answer. THANK YOU
Hey Jack, is there a way to bind a specific key to a macro in this program? For example, pressing Alt + R to write "Hello", anytime in my session? Any kind of response would be very much appreciated, thanks and love from Turkey
Folk Metal \m/ try running the game in windowed mode instead, also, you might need to use “include mouse movement” . If I do clicks only it doesn’t work in games sometimes
@@CallMeWalao I do not know how to do that :( with two monitors it works but i dont know how to do with one. Everything is possible though! Somebody knows how to do it
Is there a way like clicking different button positions then assigning shift click to them then with a single press those will be pressed at the same time?
@@bluefusion348 not really good at English but ill try to explain it- clear as possible, the scenario looks like this there are 3 or more buttons right? lets say its like a 3x3 button box so id like to do a macro where it clicks that 9 button every time, at the same time and assigning shift click to them when instead of just clicking
@@marcusmatti2930 OK, copy and paste this 8 commands in Jitbit: MESSAGE BOX : Press Enter key Mouse : C0 : C0 : Click : 0 : 0 : 0 REPEAT : *100* : 0 : 0 : 0 : 0 : 0 DELAY : *5* Mouse : *C1 : C0* : Move : 0 : 0 : 0 ENDREPEAT Mouse : C0 : C0 : Click : 0 : 0 : 0 MESSAGE BOX : Completed It's a smooth move to the right, and it clicks at the start and end of the move. Here it *repeats 100 times* a displacement in relative coordinate of *1 pixel to the right* every *5 milliseconds.* You just have to change that as you want to adapt it in all directions of the 3x3 pad. You can even remove the repeat if it's just an instant move you want, and therefore also combine the move & click in a single command in this case. Test the macro in Paint to see the action, it's useful ;)
You gotta go binto your settings. Look at the speed setting and make sure it isnt set high. Also, look at your recording movement setting. Maybe your mouse is just recording mouseclicks and not movement and that is why it is behaving weirdly. Youll find something in your settings that fixes the issue
Yes, "Super Macro" ! There are variables and calculation functions between variables that Jitbit does not have. The only defect is the minimum delay of 1 second, but the chain of commands is rather fast without delay... But 0 accuracy with the time... PS : Super Macro is no longer compatible with Windows 10.
hello man, nice video here, i still have a problem, when i assign a macro, it goes too fast, when i change playback settings to 1 button lower, it goes way too slow, i cant find the origin of the speed please i need help with this
Jack Pitman ye record mouse movement was on by default but I can’t turn Ingame. The macro is not moving the mouse ingame only in the background or on Desktop
How do I expect him to expect an image or pixel color on the screen when he appears to do the action? why every time I try to put the If commands it just ignores and resets the script.
@@JPValheim sorry for bad english. I need this: 1. continuous monitoring of pixel color. (maybe up to half an hour untill pixel change color) 2. if the pixel becomes the desired color then a simple keypress
Please Help my day How can I make this or any other macro find and click on a moving image, in a game like vega conflict how to find and click on the moving ships, thanks
Guys I have a question, in my macro list there are keyboard commands that which are key down ''shift left'' and when I add this command to any of my macros they never stop.I mean I normally use Ctrl + Q to abort playback but my macros which include key down ''shift left'' never stop.if u know how can I solve this problem please help me. apology for my bad English * u *
Hmmm, I might be able to help but maybe somebody else can help better. I'm guessing here so I could definitely be wrong! A keypress is multiple lines. Let's use the SHIFT key as an example. If I press the shift key once and I let go of it, it looks like this SHIFT KEY DOWN SHIFT KEY UP So, if I do something like this, it will cause shift to always be pressed because I never "let go" of shift SHIFT KEY DOWN --other actions --other actions --other actions That is why it is important to have the shift key be released. You would want something like this: SHIFT KEY DOWN --other actions SHIFT KEY UP --other actions --other actions
Yup, there is a [keypresseddown] command followed by a [keypressedup] command for every keystroke. So, to "hold": a key for 3 seconds looks like this [keypressdown] DELAY:3000 MS [keypressdup]
Jackpitman plz answer me : what if i wanted to make a script that allow me to answer a question 1 time by typing the answer 2 or 1 plz help because this will make me rich really hhhhh
![Find Information from a Phone Number Using OSINT Tools [Tutorial]](http://i.ytimg.com/vi/WW6myutKBYk/mqdefault.jpg)
![Find Information from a Phone Number Using OSINT Tools [Tutorial]](/img/tr.png)
Aside from the great content, I have to say, it's refreshing to see a young TH-camr speaking freely rather than reading from a script, and at normal speed rather than having all the natural pauses edited out via jump cuts.
This was a really helpful video. I was impressed with the bulk editing of the delays. I also like the way you pointed out that faster is not always better, especially if you are waiting for the computer to complete a task OR waiting for a web page to load!
Thanks for posting the video!
Thanks for your feedback :D
I've been using this tool allot recently to play Runescape jajaja
Waiting to get in trouble xD
Jack Pitman did you get in trouble yet? 🤣
Can I add notes to what which klick does ? else it gets very confusing
You are my Jedi Knight or Master, and I am proud to be your Padawan. Thank you very much.
Excellent. I downloaded JitBit and this is one of the first videos I'm watching on it. Very good introduction to it. I'm already familiar with AutoHotKey so this is a nice to see.
How do I choose a specific window?
Hi want to ask how to detect image? I still cannot figure out basically when detected the image SHOWING DONE ICON. I need to press enter immediately. Anyidea?
You can use OBS to record your screen while the done icon shows up. then look at the video file take a screenshot of the frame with the done icon. Next, use image software to isolate the done icon. In macro recorder, upload the bitmap you just isolated. Make sure to keep everything as small as possible... its a very finicky process. It needs to be basically pixel perfect.
@@JackPitmanNica Thanks for reply, but why need image software does buil-in screenshot not perfect if not perfect.then that makes sense.Because I use if image statement and capture with macro recorder .
@@john6339ef You can normally just capture the image with the built in button but if the image is only there for a moment when you mouse over the button this will not work so you must do it manually
Can we run this programme in the background to do certain tasks on a web page?
Thank you! Excellent demo and explanation!!
What a great teacher, thank you.
how can i change the "W" to "shift+w" ? someone help please
Keyboard : ShiftLeft : KeyDown
Keyboard : W : KeyPress
Keyboard : ShiftLeft : KeyUp
thanks for the intro jack! used it to record a setup for me to afk runes in elden ring overnight XD
Task scheduler doesn't work :( Auto play when double click on file is already enabled but it doesnt work.
I can often be doing very repetitive work and have known macro recorder for a while but never connected the two. I came here for the basics for a long repetitive process as oppose to plentiful short ones so Thanks for the bonus.
i have problems trying to make it so the macro actually plays the click positions
i have a problem, that the macro can only move the cursor when i move the mouse...
anyone know how to multi intances macro jitbit? thanks
Is there any official tutorial for this program? On the official YT site, there is a very crappy 2012 360p video, that shows quite nothing... this video here is the longest tutorial about this I have found and this also is extremely limited on what you show.
Hey Valmis, unfortunately I stopped using Jitbit. They didn't pay me for the traffic this video brought and didn't respond to me at all when I tried to correct the tracking in the affiliate link. So, I stopped using Jitbit's Macro Recorder. Now I use a program by the same name by a different company, Bartel Media. I'm making a very in depth macro recording guide using that new program. That recording guide will be the next video released on this channel. Should be another week or two. Its a "Learn to make macros" course that covers every feature available in Bartel Media's Macro Recorder. Very similar to Jitbit but by a company who actually communicates with me
@@JackPitmanNica hi. looking forward to it :) I actually have a letter in the draft to Jitbit to offer them a good video tutorial that I could make. Now I am thinking that maybe I should not send it if they also did not replay to you. Good luck with the new video on this other macro. Maybe I would convert to it.
Hello I was planning to buy recorder but it does not do the same as i record it sometimes it stops by itself some times it does not click on same position as i recorded which results in a mess. kindly help me.
Can you make a video how to excute a sound with "PlayWav". Currently I'm using OPEN FILE to play a sound.
I want to use jitbit recorder with multiple works
Hi do u know a lot of things on macro recorder?
Hi there, I know this video is old but I bought a basic plan since I would like to use this macro beyond the trial time, however I don’t understand how to actually register it. I can’t seem to find the serial number anywhere, and the email I got doesn’t seem helpful. Any advice?
Hi bro i have some issue with jit. I can record the macro on my window, but how do i record on a select program like a game. It won't click on the program game windown.
i need help how do you save the edited notepad file?
Is there a way to schedule a macro to run, example run the macro at 11 PM until complete?
how do you log out of jitbit
Obrigado pelo conhecimento Jack, Sempre fui fã desse programinha mas utilizo mais o Mouse Recorder, Começarei a partir de hoje a utilizar o Macro Recorder e também estarei ensinando mais pessoas a utilizar o programa também! +1 Inscrito!
Hello could any1 tell me how to do While Pixel color do this loop
That was really helpful, Jack! Thank you!
Hey, i made a macro that reads pictures and if the picture is not found it searches for "else" to find another picture. Right now there are no delays but one part where i have a delay of 1000ms. The macro still takes around 10 seconds before it has found the right "else picture.". How can i speed this up?
1000ms is 10 secs tho
GerhardtSchark no 1000ms is one second
why when i add a delay it delays every move😡😡😡
Hi, I need help to make macro where when I press on the keyboard "4" then automatically it should press "j" twice and then repeat whenever I press "4". Its for my game :D
Bro I want to hunt pokemons I want to make it work like when it sees rare pokemon it presses button ,How to set it up?? i am unable to do
Thanks, the most useful video I've seen about this software. Ofc it goes much beyond this, but for the basics it's pretty illustrative.
my macro just stops after 1 loop please help
Can you make a tutorial how to make it to hard coded with jitbit?
thanks, this is a really good introduction. could you possibly make a tutorial on macrowin?
Right now Im already doing tons of projects and dont feel interested in macro tutorials, but if you check out the course I made about making macros using jitbit; you can use the same techniques in other software; most of it has become pretty similar. You can watch that course for free and it will probably help you know how to use the software you are talking about. Best of luck!
Hey i need help i tried using mouse movement record for that it will do some tasks repeatly when i wasnt at the place but then it doesn't do anything it just stay there without me moving the cursor
Are there any solution to this?
thankyou for this very good tutorial👌
i do my works very easly by this program😍😘❤
Awesome thats great!
I GOT a problem when i reppeat IT IT says want to continue after each lap how to Get IT away
Helloo my name is ronald I´d like that u do a simple tutorial where i can play with another usuary online like me the game is final Fight by fightcade 2 can u can teacher to do that ? Where I can play with another play but this player is a macro and the macro can used many different way to play with my like a real person?
that was very helpful for me. tnx
does this support text shortcut trigger. if I type fan it will automatically type fantastic. ?
Is there a way to make yout macro go 5x speed.
Can I use Farm Game macros while playing Facebook?
Probably but Im not sure, most games do not allow you to use macros; you'll get banned if you get caught most of the time
Very good video. I had no idea how macros worked. Thank you.
*Serpent has entered the chat*
Can we use it after the trial is finished?
I have 10 days more remaining. 🤔 Shall I be able to use it after 10th day?
If its possible, how to use?
Can the macro recorder drag a window to a specific position on the screen and resize?
How to sedule the time
Hello Bro , Please help me regarding Key setting where in a case Ex.- if I have to Type "Tab" Button 70 times then I have to copy and paste Tab Button for 70 which is very bulky but I want to know how can I write the Tab such a shorter form . Kindly Inform me
Use loop or repeat for 70 times
This video was actually surprisingly helpful, compared to the other ones. I was messing with it around lately but couldn't find a tool which is "if the statement is true, end the entire task". I need it because my bot randomizes a letter from a website, scans it via picture commands and writes it down. But when it finds the "if" is true, it just stops the process, not end it, so the system is not automatic. Do you know how to solve this problem?
"IF" [do-this] "ELSE" [do-this] "END IF"
@@bluefusion348 oh. So that is what end if is for. Thanks, I have another question tho. If we connect our commands with an end if, it will end it of course. But how can I make it so it repeats whenever the if is true?
@@ardasolcun2516 Like this:
"LABEL X" "IF" [do-this] "GOTO X" "ELSE" [do-this] "END IF"
or
"REPEAT∞TIME" "IF" [do-this] "END REPEAT" "ELSE" [do-this] "END IF"
Hi please help how to detect image? I still cannot figure out basically when detected the image SHOWING DONE ICON. I need to press enter immediately. Anyidea?
Great tutorial
how do i make a key hold forever but also make the other delays work
admin, can I ask, I used jitbit macro on vps, when turning off vps, the tool still counted the loop but the operation stopped... Please help! Thank!
can i macro my game while doing my work simultaneously?
One QUESTION, if you can answer!
TRY to MOVE icon in in desktop from one position to another position!
that not work for me, also i think not work in this macro jitbit.
If you know how can i have MOUSE CLICK and move to another position and remove click, that can be drop what i click before,
it is simple question i think, try to move any icon in desktop from one place to another.
if you find the solution please answer. THANK YOU
Do you still need the solution?
Copy and paste this 8 commands in Jitbit:
MESSAGE BOX : Press Enter
Mouse : C0 : C0 : LeftButtonDown : 0 : 0 : 0
REPEAT : 100 : 0 : 0 : 0 : 0 : 0
DELAY : 5
Mouse : C1 : C0 : Move : 0 : 0 : 0
ENDREPEAT
Mouse : C0 : C0 : LeftButtonUp : 0 : 0 : 0
MESSAGE BOX : Completed
!
how i make it work on a full screen game ? like gta sa
I think you need to run the game windowed for it to work properly, but I am not sure
Hey Jack, is there a way to bind a specific key to a macro in this program?
For example, pressing Alt + R to write "Hello", anytime in my session?
Any kind of response would be very much appreciated, thanks and love from Turkey
i need some help. whenever i record my mouse on a game, it records just fine, however when i play it plays on the desktop not in the game.
Folk Metal \m/ try running the game in windowed mode instead, also, you might need to use “include mouse movement” . If I do clicks only it doesn’t work in games sometimes
@@JPValheim Hi, can i ask, can i specify which window to use the macro? For example, i can watch youtube while macro-ing bluestacks
@@CallMeWalao I do not know how to do that :( with two monitors it works but i dont know how to do with one. Everything is possible though! Somebody knows how to do it
can you use this for games
How do you reuse it after the trial?
Is there a way like clicking different button positions then assigning shift click to them then with a single press those will be pressed at the same time?
If I understood the question correctly, no, Jitbit does not produce an action if the user clicks... Jitbit clicks for the user only.
@@bluefusion348 not really good at English but ill try to explain it- clear as possible, the scenario looks like this there are 3 or more buttons right? lets say its like a 3x3 button box so id like to do a macro where it clicks that 9 button every time, at the same time and assigning shift click to them when instead of just clicking
@@marcusmatti2930 OK, copy and paste this 8 commands in Jitbit:
MESSAGE BOX : Press Enter
key
Mouse : C0 : C0 : Click : 0 : 0 : 0
REPEAT : *100* : 0 : 0 : 0 : 0 : 0
DELAY : *5*
Mouse : *C1 : C0* : Move : 0 : 0 : 0
ENDREPEAT
Mouse : C0 : C0 : Click : 0 : 0 : 0
MESSAGE BOX : Completed
It's a smooth move to the right, and it clicks at the start and end of the move.
Here it *repeats 100 times* a displacement in relative coordinate of *1 pixel to the right* every *5 milliseconds.*
You just have to change that as you want to adapt it in all directions of the 3x3 pad.
You can even remove the repeat if it's just an instant move you want, and therefore also combine the move & click in a single command in this case.
Test the macro in Paint to see the action, it's useful ;)
@@marcusmatti2930 I did this for fun (copy / paste everything directly in Jitbit)
Play the macro on Paint is better visible ;D
MESSAGE BOX : Method 1 :: Smooth moves.{#crlf#}{#crlf#}- Press Enter key to continue...
Mouse : C0 : C0 : Click : 0 : 0 : 0
REPEAT : 100 : 0 : 0 : 0 : 0 : 0
DELAY : 5
Mouse : C1 : C0 : Move : 0 : 0 : 0
ENDREPEAT
Mouse : C0 : C0 : Click : 0 : 0 : 0
REPEAT : 100 : 0 : 0 : 0 : 0 : 0
DELAY : 5
Mouse : C1 : C0 : Move : 0 : 0 : 0
ENDREPEAT
Mouse : C0 : C0 : Click : 0 : 0 : 0
REPEAT : 100 : 0 : 0 : 0 : 0 : 0
DELAY : 5
Mouse : C0 : C1 : Move : 0 : 0 : 0
ENDREPEAT
Mouse : C0 : C0 : Click : 0 : 0 : 0
REPEAT : 100 : 0 : 0 : 0 : 0 : 0
DELAY : 5
Mouse : C0 : C1 : Move : 0 : 0 : 0
ENDREPEAT
Mouse : C0 : C0 : Click : 0 : 0 : 0
REPEAT : 100 : 0 : 0 : 0 : 0 : 0
DELAY : 5
Mouse : C-1 : C0 : Move : 0 : 0 : 0
ENDREPEAT
Mouse : C0 : C0 : Click : 0 : 0 : 0
REPEAT : 100 : 0 : 0 : 0 : 0 : 0
DELAY : 5
Mouse : C-1 : C0 : Move : 0 : 0 : 0
ENDREPEAT
Mouse : C0 : C0 : Click : 0 : 0 : 0
REPEAT : 100 : 0 : 0 : 0 : 0 : 0
DELAY : 5
Mouse : C0 : C-1 : Move : 0 : 0 : 0
ENDREPEAT
Mouse : C0 : C0 : Click : 0 : 0 : 0
REPEAT : 100 : 0 : 0 : 0 : 0 : 0
DELAY : 5
Mouse : C1 : C0 : Move : 0 : 0 : 0
ENDREPEAT
Mouse : C0 : C0 : Click : 0 : 0 : 0
REPEAT : 100 : 0 : 0 : 0 : 0 : 0
DELAY : 5
Mouse : C-1 : C-1 : Move : 0 : 0 : 0
ENDREPEAT
MESSAGE BOX : Completed !{#crlf#}{#crlf#}Method 2 :: "Instant" moves.{#crlf#}{#crlf#}- Press Enter key to continue...
Mouse : C0 : C0 : Click : 0 : 0 : 0
Mouse : C100 : C0 : Click : 0 : 0 : 0
Mouse : C100 : C0 : Click : 0 : 0 : 0
Mouse : C0 : C100 : Click : 0 : 0 : 0
Mouse : C0 : C100 : Click : 0 : 0 : 0
Mouse : C-100 : C0 : Click : 0 : 0 : 0
Mouse : C-100 : C0 : Click : 0 : 0 : 0
Mouse : C0 : C-100 : Click : 0 : 0 : 0
Mouse : C100 : C0 : Click : 0 : 0 : 0
Mouse : C-100 : C-100 : Move : 0 : 0 : 0
MESSAGE BOX : Completed !{#crlf#}{#crlf#}Method 3 :: Instant moves (maximum speed){#crlf#}{#crlf#}- Press Enter key to continue...
LABEL : REP
Mouse : C0 : C0 : LeftButtonDown : 0 : 0 : 0
Mouse : C0 : C0 : LeftButtonUp : 0 : 0 : 0
Mouse : C100 : C0 : Move : 0 : 0 : 0
Mouse : C0 : C0 : LeftButtonDown : 0 : 0 : 0
Mouse : C0 : C0 : LeftButtonUp : 0 : 0 : 0
Mouse : C100 : C0 : Move : 0 : 0 : 0
Mouse : C0 : C0 : LeftButtonDown : 0 : 0 : 0
Mouse : C0 : C0 : LeftButtonUp : 0 : 0 : 0
Mouse : C0 : C100 : Move : 0 : 0 : 0
Mouse : C0 : C0 : LeftButtonDown : 0 : 0 : 0
Mouse : C0 : C0 : LeftButtonUp : 0 : 0 : 0
Mouse : C0 : C100 : Move : 0 : 0 : 0
Mouse : C0 : C0 : LeftButtonDown : 0 : 0 : 0
Mouse : C0 : C0 : LeftButtonUp : 0 : 0 : 0
Mouse : C-100 : C0 : Move : 0 : 0 : 0
Mouse : C0 : C0 : LeftButtonDown : 0 : 0 : 0
Mouse : C0 : C0 : LeftButtonUp : 0 : 0 : 0
Mouse : C-100 : C0 : Move : 0 : 0 : 0
Mouse : C0 : C0 : LeftButtonDown : 0 : 0 : 0
Mouse : C0 : C0 : LeftButtonUp : 0 : 0 : 0
Mouse : C0 : C-100 : Move : 0 : 0 : 0
Mouse : C0 : C0 : LeftButtonDown : 0 : 0 : 0
Mouse : C0 : C0 : LeftButtonUp : 0 : 0 : 0
Mouse : C100 : C0 : Move : 0 : 0 : 0
Mouse : C0 : C0 : LeftButtonDown : 0 : 0 : 0
Mouse : C0 : C0 : LeftButtonUp : 0 : 0 : 0
Mouse : C-100 : C-100 : Move : 0 : 0 : 0
IF MESSAGE : Completed !{#crlf#}{#crlf#}Restart ?{#crlf#}{#crlf#}> Press Enter key to Restart...{#crlf#}{#crlf#}> Keep Enter key pressed to Spam... lol{#crlf#}{#crlf#}> Press N key to Stop the macro...
GOTO : REP
ELSE
MESSAGE BOX : Good Bye !{#crlf#}{#crlf#};D
Good replacement for iMacros?
Wonderful my old friend
how do I bind the macro to a specific key?
how to bind a few words for spaming in league of legends ? If anyone knows pls tell me
Thank you SO MUCH !! This worked perfectly for me and you explained everything so well 🥰
This is awesome dude
why does my mouse spasm all over the place its literally being moved at one inch per hour
You gotta go binto your settings. Look at the speed setting and make sure it isnt set high. Also, look at your recording movement setting. Maybe your mouse is just recording mouseclicks and not movement and that is why it is behaving weirdly. Youll find something in your settings that fixes the issue
Every time I open it. It gives me an error message
any other cool macro recorders out there?
LOVE LIGHT in my opinion this is the best macro recorder
@@epicpengu6210 It is, don't get me wrong. Just to have any as a back-up
it costs 53 dollars for me RIP
imma look for another one
Yes, "Super Macro" ! There are variables and calculation functions between variables that Jitbit does not have.
The only defect is the minimum delay of 1 second, but the chain of commands is rather fast without delay... But 0 accuracy with the time...
PS : Super Macro is no longer compatible with Windows 10.
hello man, nice video here, i still have a problem, when i assign a macro, it goes too fast, when i change playback settings to 1 button lower, it goes way too slow, i cant find the origin of the speed please i need help with this
good introductory video - nice clear explanations - thanks jack.
trojan agent?
I would like to know, what makes this programme does not work. I tried Jitbit on an online game, it did noy work. Thank you in advance.
esta dando erro , o sistema nao funciona !!
Serpent AU Be in here
wont record mouse movement in games. Really getting on my nerves and cant find a fix
Theres a setting you can click to enable that. "Record Mouse Clicks Only" "Record Mouse MOvement"
Jack Pitman ye record mouse movement was on by default but I can’t turn Ingame. The macro is not moving the mouse ingame only in the background or on Desktop
@@JPValheim Put the game in windowed.
Your game is FPS/TPS? It does not work in this case...
How do I expect him to expect an image or pixel color on the screen when he appears to do the action? why every time I try to put the If commands it just ignores and resets the script.
"IF Image" [do-this] "ELSE" [do-this] "END IF"
In:
GOTO/LABEL or InfiniteLoop
I lıke how there is a "dark side of the moon" by Pink Floyd playing from the background :)
Hello. Can I ask about this program?
Yo! Sure, whats would you like to learn?
@@JPValheim sorry for bad english. I need this:
1. continuous monitoring of pixel color. (maybe up to half an hour untill pixel change color)
2. if the pixel becomes the desired color then a simple keypress
Very informative, cheers :)
Please Help my day How can I make this or any other macro find and click on a moving image, in a game like vega conflict how to find and click on the moving ships, thanks
i have error if pointer doesnt move ?
Put the game in windowed.
Loved It!!
can u make it go back to a certain task? like I fu have 4 task to be done and when a pixel color come up u want it to go back to task 2. for exempel?
Guys I have a question, in my macro list there are keyboard commands that which are key down ''shift left'' and when I add this command to any of my macros they never stop.I mean I normally use Ctrl + Q to abort playback but my macros which include key down ''shift left'' never stop.if u know how can I solve this problem please help me.
apology for my bad English * u *
Hmmm, I might be able to help but maybe somebody else can help better. I'm guessing here so I could definitely be wrong!
A keypress is multiple lines. Let's use the SHIFT key as an example.
If I press the shift key once and I let go of it, it looks like this
SHIFT KEY DOWN
SHIFT KEY UP
So, if I do something like this, it will cause shift to always be pressed because I never "let go" of shift
SHIFT KEY DOWN
--other actions
--other actions
--other actions
That is why it is important to have the shift key be released. You would want something like this:
SHIFT KEY DOWN
--other actions
SHIFT KEY UP
--other actions
--other actions
@@JPValheim hmm thank you for ur reply Im gonna try this
@@JPValheim Thank you so much it solved my problem :))
Is there a way to use the macro for tot times and then switch to another macro?
"REPEAT X TIMES"
"EXIT LOOP" (optional)
"END REPEAT"
wow, I have a great idea for this application, thanks for sharing.
Yooo Jack Thanks! Now I can go destroy some kids on roblox bedwars now!
where is the free one
great video
is this have a virus? how to download this? please reply As soon as possible
SerpantAu has entered the chat !
is it possible to make it hold keys for certain amounts of time
Yup, there is a [keypresseddown] command followed by a [keypressedup] command for every keystroke. So, to "hold": a key for 3 seconds looks like this
[keypressdown]
DELAY:3000 MS
[keypressdup]
Awesome it's working thanks a lot you saved my life.
Can it record mouse clicks and movement?
Yup! You can enable or disable mouse movement. I usually make macros that disable mouse movement and just do clicks and keyboard
ye
Jackpitman plz answer me : what if i wanted to make a script that allow me to answer a question 1 time by typing the answer 2 or 1 plz help because this will make me rich really hhhhh