For anyone having bs4 and above versions.... Buy the flasher module of RS200 from Bajaj itself, and replace it with your stock one, the location of the flasher is under the right side panel, the exact location where he placed his resistors, it's the right most relay, ie right side of the maroon color relay present over there... It's a plug and play fit, no mods required
See I have a cbr 250r and I have same problem, I understood the wiring diagram I just need to know if I use the hazard light ( not hazard flasher ) , normal hazard , will these still get hot ? And what happens if they get too hot and should I do it then ? I used hazard mode a lot.
bhai load resistor lagane ke alawa kuch light control module change ya flasher relay ki video banai h apne to btao ya easy way ki video bana do please jo ns160 me bhi use ho jaye
Can any local mechanic fix those and iam planning to install highway indicator flasher for Hazard light and different patterns , so I think I have to do the same you did ?
Sahil Gyanchandani it is not that hard job...I guess you can do it yourself. A mechanic can also help. But I guess you should do it on your own just follow our DIY !!
Bro will just installing autofy v2 highway flasher blue for led indicators will solve this hyper blinking issue? I have pulsar 180 ug4 and have hazard light mod on my bike with led indicators and they blink too damn fast
Bro I'm getting too much vibrations from my head and how can I get the pilot lamps and meter light on whenever I turn on the ignition only not stating the engine
Yuvraj singh check the front viser for vibrations. Open it and install a pad or double tape on the same. Well for the pilot lights and meter lights could you please tell me is your bike bs3??
bhai rs200 ka light control module ns160 me lag jayega ya nah please help me bro bcoz maine dothediy ka flasher mangwaya hai or woh pattern change nahi kar rha h seller ka kehna h relay change karo but ns me light control module bulb ka toh please help me RS200 ka lagega ya nahi
Mohit Kumar mostly mushkil hai bro, coz NS main single relay hota hai n RS ka different relay hai. i checked for my bike (NS200) so went with this only and flasher ka relay pe dependency nai hota hai if it is not working it might be faulty coz i have changed 2 flashers till date and they work great and costed me only ₹150 each
If i do such changes would the warranty be voided or not and how does ns200 perform on Highway and hills if you have taken ii there.. I am planning to sell my bullet and want to buy this bike, can i take it on Highway and hills ?
Kunal Khurana it is a great performer buddy Both on highway n hill In no time it cathes 120kmph Warranty won't be voided if you don't cut the wire! Happy Riding!
hi, i am trying to put ktm led indicator in my street triple 675, they now hyper flash, could you please tell me what watt/ohm I need for them to stop hyper flash?
@@MohitKumar-iz8qh Bhai UNO Minda ke naam se flasher relay hai Amazon pe miljata hai, video description main shayad added hai agar nai hai to direct search krlo, uske saath manual ati hai how to install
We are still looking into it...as it seems like both the relays have the same part ID hence both of them are same...but if something comes up we will definitely post it!
no the RS flasher relay is different I ordered it and found that ns headlight and indicators are controlled by the same relay.for installation of RS flaser relay we have to use old ns wiring that is non ago one.
I will suggest easy and cheaper way just connect the 2 10 watt bulbs separate with the indicator connection and hide the bulbs inside seat speed of led indicator will be normal
When you install LED indicators replacing your bulb indicators the Indicators start to blink fast which is also known as Hyper Blinking. Hope this answers your question!
Are you still facing the same issue??
Let us know we will be happy to help you!
For anyone having bs4 and above versions.... Buy the flasher module of RS200 from Bajaj itself, and replace it with your stock one, the location of the flasher is under the right side panel, the exact location where he placed his resistors, it's the right most relay, ie right side of the maroon color relay present over there... It's a plug and play fit, no mods required
Bro if am OK with the hyperblinking and keep as it is..will it harm anything or is there risk or short circuiting?
Nice 👍 do you have anything that works for a cycle
See I have a cbr 250r and I have same problem, I understood the wiring diagram I just need to know if I use the hazard light ( not hazard flasher ) , normal hazard , will these still get hot ? And what happens if they get too hot and should I do it then ? I used hazard mode a lot.
Yeah they will get hot!!! It’s better to buy a resistors with heat sink… they work i a charm… they have been working for 2yrs now
@@RevExplorers okayy thanks man
bhai load resistor lagane ke alawa kuch light control module change ya flasher relay ki video banai h apne to btao ya easy way ki video bana do please jo ns160 me bhi use ho jaye
Mohit Kumar no bro!! Actually we wanted to keep it more generic to address everyone’s problem
Very very thankful to you man , few days ago installed KTM indicators on my new ns200 , thanks for solution.
Sahil Gyanchandani welcome buddy!!
Can any local mechanic fix those and iam planning to install highway indicator flasher for Hazard light and different patterns , so I think I have to do the same you did ?
Pls reply buddy
Sahil Gyanchandani it is not that hard job...I guess you can do it yourself. A mechanic can also help. But I guess you should do it on your own just follow our DIY !!
Rev Explorers ok bro , where to get the best resistor
Bro please suggest any other procedure, as I have to install only hazard switch and not a highway flasher.
so easy trics for u. showroom rs 200 light control module in ur ns 200 that hyper blinking probem is sholved
bhai rs200 ka light control module ns160 me lag jayega ya nahi
sir pls yeh bataiye agar ktm indicator install karwa diya hai maine ab highway flasher lagwa de toh yeh 10 ohm 10 watt resister nahi laga Hoga na
Harsh Rai sir agar hyper blink kr Raha hai to lagwana hoga else nahi zaroorat hai!
Brother do I have to do any wire cutting?
Sahil Gyanchandani not technically cutting but you can just peel the insulation and attach the wire
Bro will just installing autofy v2 highway flasher blue for led indicators will solve this hyper blinking issue? I have pulsar 180 ug4 and have hazard light mod on my bike with led indicators and they blink too damn fast
Bro what mileage are you getting in your bike and can we get approx 40kmpl in this bike by very sane riding
Ambuj Sharma yes buddy you can!
I can't promise on 40 but 38 is easy
If you are getting low mileage get your timing checked
Bro I'm getting too much vibrations from my head and how can I get the pilot lamps and meter light on whenever I turn on the ignition only not stating the engine
Yuvraj singh check the front viser for vibrations. Open it and install a pad or double tape on the same.
Well for the pilot lights and meter lights could you please tell me is your bike bs3??
Rev Explorers yes my bike is bs3 the 2015 Metallic white ns200
Bhaiya thanku for video 😍😍😍😍
+Ama Zing you are most welcome bro!
bhai rs200 ka light control module ns160 me lag jayega ya nah please help me bro bcoz maine dothediy ka flasher mangwaya hai or woh pattern change nahi kar rha h seller ka kehna h relay change karo but ns me light control module bulb ka toh please help me RS200 ka lagega ya nahi
Mohit Kumar mostly mushkil hai bro, coz NS main single relay hota hai n RS ka different relay hai. i checked for my bike (NS200) so went with this only and flasher ka relay pe dependency nai hota hai if it is not working it might be faulty coz i have changed 2 flashers till date and they work great and costed me only ₹150 each
I am using highway flasher so now how to stop hyperblinking??
Can we change the relay of the bike
Manoj Kumar it might. Haven't tried it yet
If i do such changes would the warranty be voided or not and how does ns200 perform on Highway and hills if you have taken ii there..
I am planning to sell my bullet and want to buy this bike, can i take it on Highway and hills ?
Kunal Khurana it is a great performer buddy
Both on highway n hill
In no time it cathes 120kmph
Warranty won't be voided if you don't cut the wire!
Happy Riding!
Rev Explorers thanks buddy
hi, i am trying to put ktm led indicator in my street triple 675, they now hyper flash, could you please tell me what watt/ohm I need for them to stop hyper flash?
Anytube the resistor is 10ohm 50W
Bhai fast blink katnesa kus problem hogi kiya?
Rahul Pradhan No bro!
But acha nai lagega
Varroc flasher relay that's it plug and play
Bhai ji koi easy way btao bina soldering or without wire cutting ke
Mohit Kumar bhai uska relay ata hai, but for that as well you will need to cut the wire
@@RevExplorers bhai ji konsa relay aata h naam ya kuch model no. Btadoge please
@@MohitKumar-iz8qh Bhai UNO Minda ke naam se flasher relay hai Amazon pe miljata hai, video description main shayad added hai agar nai hai to direct search krlo, uske saath manual ati hai how to install
@@RevExplorers bhai ji lagaya tha nhi huyi hyper flashing normal module me jo 6pin h uski 2 pin jo white sochet me lgaya hua nahi
Mohit Kumar we have never used it, this felt more easy... so did this way (with load resistor)
Is this same process for Pulsar180 ? Help me out
Pranay T Belagala yes sir it will be the same!
It is a generic solution for all Hyper blinking indicators
Mine is blinking to slowly tell me solution
Tell me a solution for hyperblinking on Yamaha fz??
it is the same!
Bro if we install relay of rs200 will hyper blinking problem solve?
We are still looking into it...as it seems like both the relays have the same part ID hence both of them are same...but if something comes up we will definitely post it!
Rev Explorers bro if they were same then you would have not faced hyperlink problem, please check & make a video on it.
no the RS flasher relay is different I ordered it and found that ns headlight and indicators are controlled by the same relay.for installation of RS flaser relay we have to use old ns wiring that is non ago one.
Anirban Dey so can we install RS relay in 2017 ns 200???
no we can't because RS has seperate aho
Bro this kmt indicater apache 180 key li aa kaha sey mil sak tey hai
Nirmal Kaur bajaj/ ktm store
I will suggest easy and cheaper way just connect the 2 10 watt bulbs separate with the indicator connection and hide the bulbs inside seat speed of led indicator will be normal
Is hyper flashing illegal? If not.... I prefer hyper flashing
What is hyper-blinking..??
When you install LED indicators replacing your bulb indicators the Indicators start to blink fast which is also known as Hyper Blinking.
Hope this answers your question!
Osm
+Èż ŔıĐéŔ Thank you! 😃