Hi, great video, I have just got this pistol and I noticed you said you super glued the spring on the magazine. I haven’t found a spring did you mean the screw at the front ? Cheers, Roger.
@@rogerquaife6740 No. In the back of the magazine is a small hole that has the end of the spring in it. This tensions the magazine when rotating to load. Mine sprung out so I dismantled the magazine, glued the end of the spring in the hole with a tiny drop of superglue, left to dry then reassembled the magazine. No more problems.
Nice video mate ! Now i have a question for you. Do you think it would possible to put on a barrel extention instead of the silencer. As i said nice video, keep them coming.
Is your still working? Mine fired less shots and had less power than my Umerex Beretta 92fs after a few months then the seals went so I couldn't load a gas cylinder without it losing all the gas no matter how hard I tightened it.
hi exellent vids just purchased one from solware my nearest RFD also in the second hand cabinet they had a mint in the box HW.70 i purchased that and i love it . the quality is superb. i love my pistols, just a shame the replicas they dont up the power for longer target shooting to around 5ftlbs. anyway never mis your vids nice one. manythanks..
It's an holographic sight, generally from eBay, but I buy mine from Amazon, as there faulty returns as much better, though I've never had a reliability problem, and I have a few. If you get one, just remember to loosen the locking grub screw, before and after adjustment.
Sadly mine is leaking and was taken back to the point of sale who have sent it to the importer Highland Outdoors...apparently its being replaced but they have no stock.....confused? I am🙁🔫👎 so unless you can dismantle and fix it yourself id steer clear and buy an hw45/75
There has been reports of a bad batch of Nemesis pistols. Mine is an early one with no issues. I have the HW45 Silver Star in .22 Cal, a hand cannon that takes practice to shoot consistently. If you struggle with springer pistols, then the HW75 is for you, though both are 2.5 times the price of the Nemesis.
Update.....the Nemesis was replaced and lasted upto july 24, so just over a year.....and started leaking again...have you changed the seal on yours yet or is it still going well? I've also bought the matching co2 rifle for MyLovelyWife as she cant cope with a heavy springer but is a great shot with a rifle. I trained with full bore pistols and after the ban, switched to air pistols as it would be more accurate if I threw the rifle at the cans. So we can go to the range (Ivybridge Gunroom) together.....after 30 years of marriage that counts as romantic🔫👍🤔
Dear Reeve, regarding to mentioning the ambient temperature, there is no such thing as "centigrate" ............ It is "Celsius" and nothing else, if you want to express temperature in the only proper way.
I like it , and it's accurate ... Ain't a bad price either .. makes me wanna go out and buy one , unfortunately at the moment , I can't ... Nonetheless , I think it MAY be one for the future .. damn good shooting btw , and as for that hernia ( like I've got ) get an elasticated sports belt ... They work a treat , use one at work , and have too lift heavy stuff , saves my insides dropping out my bellybutton ..
Hi, great video, I have just got this pistol and I noticed you said you super glued the spring on the magazine. I haven’t found a spring did you mean the screw at the front ? Cheers, Roger.
@@rogerquaife6740 No. In the back of the magazine is a small hole that has the end of the spring in it. This tensions the magazine when rotating to load. Mine sprung out so I dismantled the magazine, glued the end of the spring in the hole with a tiny drop of superglue, left to dry then reassembled the magazine. No more problems.
@ Thanks for that !
Excellent review mate. Keep them coming.
🙂👌
Good video, I was looking at them this morning. Fancy a pistol for plinking about.
What's the silencer on that Neil?
Love your shorts:)
cool video mate, I've just bought one of these, what Wehrauch silencer is that? might help with the neighbours!
Standard 1/2 UNF Weihrauch mate. Fits straight on. It's good for .177, .20 & .22 Cal.
@@reevessairgunningreviews5572 thanks mate very helpful, have a super Christmas!
@@BalearicBeatnik Thanks mate. And Merry Christmas to you.👍🥃🥃
Nice video mate ! Now i have a question for you. Do you think it would possible to put on a barrel extention instead of the silencer. As i said nice video, keep them coming.
You could probably manufacture your own barrel. Personally I think the barrel length is just right.
Is your still working? Mine fired less shots and had less power than my Umerex Beretta 92fs after a few months then the seals went so I couldn't load a gas cylinder without it losing all the gas no matter how hard I tightened it.
Yes. No problems so far. If yours is under warranty get it replaced. I always vent myCo2 very slowly to minimise the chance of seal damage.
hi exellent vids just purchased one from solware my nearest RFD also in the second hand cabinet they had a mint in the box HW.70 i purchased that and i love it . the quality is superb. i love my pistols, just a shame the replicas they dont up the power for longer target shooting to around 5ftlbs. anyway never mis your vids nice one. manythanks..
Hello, where can I buy one of those silencer extensions?
It's the Weihrauch silencer and can be bought at most RFD's including Weihrauch dealerships.
What red dot make is it
It's an holographic sight, generally from eBay, but I buy mine from Amazon, as there faulty returns as much better, though I've never had a reliability problem, and I have a few. If you get one, just remember to loosen the locking grub screw, before and after adjustment.
@@reevessairgunningreviews5572 thank you 👍
@@reevessairgunningreviews5572 what mm
@@UrXeclan22 if that is the calibre it’s .22 or 5.5mm
Sadly mine is leaking and was taken back to the point of sale who have sent it to the importer Highland Outdoors...apparently its being replaced but they have no stock.....confused? I am🙁🔫👎 so unless you can dismantle and fix it yourself id steer clear and buy an hw45/75
There has been reports of a bad batch of Nemesis pistols. Mine is an early one with no issues. I have the HW45 Silver Star in .22 Cal, a hand cannon that takes practice to shoot consistently. If you struggle with springer pistols, then the HW75 is for you, though both are 2.5 times the price of the Nemesis.
Update.....the Nemesis was replaced and lasted upto july 24, so just over a year.....and started leaking again...have you changed the seal on yours yet or is it still going well? I've also bought the matching co2 rifle for MyLovelyWife as she cant cope with a heavy springer but is a great shot with a rifle. I trained with full bore pistols and after the ban, switched to air pistols as it would be more accurate if I threw the rifle at the cans. So we can go to the range (Ivybridge Gunroom) together.....after 30 years of marriage that counts as romantic🔫👍🤔
What silencer is that
Aidan Benoit Weihrauch
What model is silencer
@@friend8501 Weihrauch mate.
REEVES'S AIRGUNNING REVIEWS
Anyone
@@friend8501 Weihrauch only make one airgun silencer to my knowledge, and it will shoot .177 , .20 & .22 Cal through it.
which red dot is it?
Holographic Red/Green Dot. 4 different reticles. This is a CV Life one, but there are many similar ones on eBay, around the £15 mark.
@@reevessairgunningreviews5572 ta v much
Mine has started to leak co2...have you managed to work out how to dismantle your Nemesis or is it trouble free?🔫💨😟
Dear Reeve, regarding to mentioning the ambient temperature, there is no such thing as "centigrate" ............
It is "Celsius" and nothing else, if you want to express temperature in the only proper way.
I like it , and it's accurate ... Ain't a bad price either .. makes me wanna go out and buy one , unfortunately at the moment , I can't ... Nonetheless , I think it MAY be one for the future .. damn good shooting btw , and as for that hernia ( like I've got ) get an elasticated sports belt ... They work a treat , use one at work , and have too lift heavy stuff , saves my insides dropping out my bellybutton ..
Put a weaker hammer spring in, you only need around 3fpe for close range and you'll get more shots.
Should be Good at bench rest