99% of CS2 Players Don't Know This Trick with Cheaper Gloves to make Them Look Factory New. Join my CS2 Discord Community: / discord If you enjoyed, consider subbing to the channel and have a great day!
I am honestly surprised people never checked wear patterns before, you can insantly see a big difference with certain gloves just by filtering on .15 float and going through all the listings
Ohh I never knew that the Pattern ID impacts where the scratches are present on gloves You're honestly amazing at making the best playskins for your buck
with this knowledge, i can see about a nice pair of gloves for my fade knife. i bought Black Ties for T side (although the wear on the knuckles are p noticeable, it's better than some of the other ones i saw) but still have the Polygons from my previous setup on CT side. they're not bad, but i feel other gloves could do better
It's actually crazy how much the price difference is. For my FT Polygons, I have a .159 float, I paid ~$225 USD, if you change it to a .149 Min wear, people are asking ~$320 USD. 40% price increase for 6% wear difference.
I had imperial plaids that were .29 but the wear pattern made them look better then most plaids from .28 to .18, wear patterns make such a huge difference it’s insane lol
I'm actually looking for a good pair of those right now, what patterns and float do you recommend looking for? Also what site do you recommend when it comes to buying/trading? Thank you brotha
@@p3rryChi I used buff and it was a quality experience, but i don’t know the specific patterns that have good knuckles and what not, mainly id just inspect any gloves .31 and below and compare them to other low float ft gloves to see if they looked similar in quality for reference. And it’s important to test them with your knife too see if you really do love em. Be picky also, the gloves ain’t going anywhere ya feel me
If you asking about Imperial Plaid, then i am your guy. #1 pattern 206, at 0.15, it is basically FN #2 pattern 456, at 0.19 it is so clean, cleaner even to most low-end MW, imagine min float ft. And even at high float ft such as 0.36 they got significant less wear comparing to others lower float Plaid. #3 pattern 681, i owned this pair at 0.16, and also bought it during the market crash state of cs2 (for only ¥2558.8), the only mini tiny weensy scratch on it is on the left knuckle and it is so small that on almost every lighting it is not visible
I have a pair of moto gloves BOOM FT .151 and because they have probably the best FT pattern possible they ACTUALLY look FN. They look even better than my friends .09 MW moto gloves boom... its insane
Great vid, I always watching your recent videos. I'm actually considering buying gloves but where should I look for? Ofc there's steam market but it's not giving me the information I need.
Both are pattern 1 in that example, but overprints are super pattern based where you can get 3 different variants with them, so I would definitely recommend checking out how they change from pattern to pattern👍
@@TheSlaid Thanks man! I really appreciate it. The hedges were very clean but like you say most patterns around .2 look the same, love how the overprints look for pattern 1. Looking forward to the next vid
@@blankrose9426 Tbf that's just a sport glove thing in general but they are some that they absolutely gutted like Amphibious. You legit cannot make them look good anymore when in CS:GO they had basically no scratches even in bs.
There’s a pattern on black tie gloves I think it’s 89 where they look so good it only showed the smallest scratch on one of the right knuckles that you could barley see, and the wear was like .34 you could really get a steal if you manage to get a decent field tested float
It's shame that you can get really clean looking diamondbacks on field tested while king snakes if you want to get really clean look you need to get really low float mw pair.
Wear patterns have to be checked in game, there isn't a guide for them, but you can easily tell if a wear pattern is good or not by looking at it in game👍
Wait you unironically had to make this video because they actually thought you were lying about float on skins in your vids. Honestly sad people argue when they haven't done a lick of research...
@@roxinim6479fr I don’t get why people think they’ll let this game die. I get it the cheating has been horrid but aside from all the copium comments it will change for the better. Just a matter of when
I am honestly surprised people never checked wear patterns before, you can insantly see a big difference with certain gloves just by filtering on .15 float and going through all the listings
not only on gloves, but on almost any skin too
Ok thx
Amazing video brother!!!! This was super helpful in understanding these things! keep it up🔥🔥🔥🔥
Amazing video brother! this was the first video ive seen with this information and has help so much!
Ohh I never knew that the Pattern ID impacts where the scratches are present on gloves
You're honestly amazing at making the best playskins for your buck
Damn learnt' alot in this video, thanks!
You have a great day too!
I didn’t know this at all, this was super helpful ^_^
Dude, thanks a lot! This is super helpful!
ay, that was really helpful and interesting. thanks for the info :D
man I really love your videos they are super helpful
Amazing video..! I didn't know why my skins are always looks worse than youtubers' skin at same float.. thank u for great information!!
Damn u would make mcskillet proud
Really helpful and informative, keep it up Slaid
Appreciate it ma drilla🙌
you guys have great content. easy sub
Bro is releasing the holy grail, easy sub
Love your content! Keep it up!
thank you v much, I definitely will🔥
Vice Gloves seem really random with the knuckle wear and overall float value.
with this knowledge, i can see about a nice pair of gloves for my fade knife. i bought Black Ties for T side (although the wear on the knuckles are p noticeable, it's better than some of the other ones i saw) but still have the Polygons from my previous setup on CT side. they're not bad, but i feel other gloves could do better
100% facts, I had well worn black tie gloves before and it looked better than some of field tested lol
Super informative!
there is my combo :D big game sportgloves and tigertooth butterfly
It's actually crazy how much the price difference is. For my FT Polygons, I have a .159 float, I paid ~$225 USD, if you change it to a .149 Min wear, people are asking ~$320 USD. 40% price increase for 6% wear difference.
Spot on, low float field tested gloves are genuinely insane in terms of value. W choice on the polygon gloves as well🔥
Another brilliant video 🎉
I never new the pattern id changes where the wear is, makes sense tbh
Super helpful video!!
I had imperial plaids that were .29 but the wear pattern made them look better then most plaids from .28 to .18, wear patterns make such a huge difference it’s insane lol
I'm actually looking for a good pair of those right now, what patterns and float do you recommend looking for? Also what site do you recommend when it comes to buying/trading? Thank you brotha
@@p3rryChi I used buff and it was a quality experience, but i don’t know the specific patterns that have good knuckles and what not, mainly id just inspect any gloves .31 and below and compare them to other low float ft gloves to see if they looked similar in quality for reference. And it’s important to test them with your knife too see if you really do love em. Be picky also, the gloves ain’t going anywhere ya feel me
Real, saw really good crimson weaves with .23. Pattern affects a lot
Another masterpiece explanation !!
Just bought a field tested sport glove 0.16 with a pattern much prettier without any scar than some minimal wear.
The only thing left is finding out which wear patterns are the best, which might take some time...
If you asking about Imperial Plaid, then i am your guy.
#1 pattern 206, at 0.15, it is basically FN
#2 pattern 456, at 0.19 it is so clean, cleaner even to most low-end MW, imagine min float ft. And even at high float ft such as 0.36 they got significant less wear comparing to others lower float Plaid.
#3 pattern 681, i owned this pair at 0.16, and also bought it during the market crash state of cs2 (for only ¥2558.8), the only mini tiny weensy scratch on it is on the left knuckle and it is so small that on almost every lighting it is not visible
I have a pair of moto gloves BOOM FT .151 and because they have probably the best FT pattern possible they ACTUALLY look FN. They look even better than my friends .09 MW moto gloves boom... its insane
thanks for the guide! also what viewmodel do you use in the video?
Appreciate it and I use 68 fov
Gread vid just would have liked some examples of bad wear pattern gloves like are slingshot gloves good or bad?
Valve when asked to do just a moderate amount of trolling be like
Yea, as a cheap ass I figured this out, look at black ties 0.37 pattern 300 and 333 then look at min wear any pattern.
Great Vid!
Great vid, I always watching your recent videos. I'm actually considering buying gloves but where should I look for? Ofc there's steam market but it's not giving me the information I need.
CSFloat is my recommendation, it’s currently under maintenance but has the largest selection and the cheapest prices by far👍
Interested in your dream Spearmint loadout - as I’m looking to buy spearmint’s soon.
There’s a reason why hedge mazes cost 3x any other sports gloves
they don't
Another banger from you Slaid. Any chance you have the pattern ID from the Hedge Maze and Overprints?
Both are pattern 1 in that example, but overprints are super pattern based where you can get 3 different variants with them, so I would definitely recommend checking out how they change from pattern to pattern👍
@@TheSlaid Thanks man! I really appreciate it. The hedges were very clean but like you say most patterns around .2 look the same, love how the overprints look for pattern 1. Looking forward to the next vid
Pandora's Box, Superconductors and Hedge Mazes have insanely good wear patterns.
Expected for top 3 most expensive gloves in the game
@@blankrose9426 Tbf that's just a sport glove thing in general but they are some that they absolutely gutted like Amphibious. You legit cannot make them look good anymore when in CS:GO they had basically no scratches even in bs.
Always ways you can save a buck. Got the scarlett shamagh at .17 flv to pair with my slaughter butterfly. saved some money and they look mw.
this is amazing 😍
i had all the black/white combos
Maybe from the next knife/gloves combo videos you should include patterns & wear for the sheeps so they dont bHAAA
What's the best wear pattern for cool mints? Trying to combo with p4 dopller m9( fake sapphire pattern)
There’s a pattern on black tie gloves I think it’s 89 where they look so good it only showed the smallest scratch on one of the right knuckles that you could barley see, and the wear was like .34 you could really get a steal if you manage to get a decent field tested float
Can u tell me pls, what the best wear pattern for scarlet shamagh is?
very nice video
It's shame that you can get really clean looking diamondbacks on field tested while king snakes if you want to get really clean look you need to get really low float mw pair.
I cant stand the thumb stains on specialist gloves they grind my gears
I won’t touch moguls for that reason. It’s tragic lol
Thanks for the video , I have a question what gloves I can buy for talon urban masked ft
I really like smoke outs with them if your pattern is mostly gray on the knife
@@TheSlaid thanks for the advice
Can we get more of this please!
How do I know which pattern id is the best for each glove?
How do you inspect gloves with a certain pattern or any item in general? What server? Make a guide please.
I use epidemic’s inspect servers and cs2inspects.com to Gen the skins. If you have more questions I can definitely explain it in the discord server👍
I got BS Fade gloves and they look cracked up yes but they still look good with my fake karambit ultra violet 0.182 😂
Anyone know whats a good pattern # for Slingshots?
hey spaid could you please recommend some good patterns for Spearmints? 😊
In my opinion spearmints that have primarily white with small mint spots covering the back of the gloves look the best, an example would be pattern 8👍
Does anyone know of any other good wear patterns for Black Ties?
I watched this right after buying MW amphibious gloves… RIP
i hope they'll fix amphibious
W video as always
I legit want my gloves ugly as possible becauae they look like my grandpa gloves for work
Peace up, A-town! YEaAAAAH!
hello where can we check the patern ID = where the wear on glove is. ty
Wear patterns have to be checked in game, there isn't a guide for them, but you can easily tell if a wear pattern is good or not by looking at it in game👍
@@TheSlaid I suck at it, would you help me choose when for a small fee?
@@miosina_629 Sure, you can dm me on Discord with any requests👍
@@TheSlaid just need a glove
mom - my cool mints 0.19 are famous now
I have 0.18 amphibious gloves tho xd
the goat
banger
❤
Muy bien, ahora en español
W
Wait you unironically had to make this video because they actually thought you were lying about float on skins in your vids. Honestly sad people argue when they haven't done a lick of research...
okay tell us the perfect wear pattern for vices
Pattern 271
PLEASE STOP BUYING SHIT UNTIL VALVE ACTUALLY DOES SOMETHING ABOUT THE GAME!
when they do something, all prices will go up
@@roxinim6479fr I don’t get why people think they’ll let this game die. I get it the cheating has been horrid but aside from all the copium comments it will change for the better. Just a matter of when
banger
W