Using a "doubler plate" and "table saw analogy " to hollow grind a blade. Part 1

[@blackarm3265]

That water port is sick! Thanks for sharing ur knowledge bro

[@denniscasey986]

Love your videos but have been unable to locate those large magnets, that you are using, only really small wimpy ones. Any info would greatly be appreciated.Thank you.

[@lucrebrazzi4069]

I typed in "table saw grinder"as a search to see if anyone had tried something like this and low and behold.

[@lawrenceogden8682]

watch videos like this every night finally seen someone who is wet grinding , fantastic to see, but in reality you can get away with a lot less and it will still work, great video

[@n00baTr00pa]

I was thinking of making a setup like this because it sounded like a good idea in my head, thanks for sharing!

[@n00baTr00pa]

You could make straight razors super easy with this

[@uvmetalworkingfabrication1873]

Awesome... Thanks for sharing your tooling ideas and techniques!

[@zahnklyberg9448]

I’m currently working on this same table setup, only off the drive wheel I’m replacing with 8” contact wheel only probably from underneath wheel

[@mrsensable]

Great videos Travis. Whats your thoughts on the air/water being blasted while grinding?
Might be worthwhile just for keeping grinding dust out of air?
What size wheel are you using? 8"?

[@deletant9781]

Hello.
Very interesting design of the machine and its equipment

[@karlnash7105]

Excellent tutorial. Thank you

[@kknives_switzerland]

Wet grinding is the only way🤜🏻🤜🏻🤜🏻

[@CORZER0]

Thanks for sharing! Do you have any info about your water jet setup/equipment?

[@mrhp434]

I work down the road at deere never knew your shop was there

[@harryvanniekerk7269]

It is brilliant! Thank you.

[@Allen.Hickers_]

Sweet cooling system you have there.... but where does the water go? And doesnt it mess up the beltgrinder ?

[@markwestlake710]

Where can you get this jig?

[@priority2]

Just incredible!

[@pbevinstowerst]

Do you hollow grind before or after you heat treat and quench ?

[@AndrewLakey]

Great method, thank you for making this video. Is that an 8" wheel?

[@shaunm2208]

Do you 45 your edges before you grind thisa way i think i need to try this

[@marcellogenovese199]

Do you sell these? Also does this only work with the TW 90's?

[@nookphone6618]

Good

[@darrenrobichaud6442]

Any issues with magnets making the blades stick to the plates while trying to grind? Great set up and thanks for sharing.

[@aldogressa6708]

What used sandpaper to work with fruid cooling.

[@muratbasarir6046]

U r doing random everything