Очень классный верстак для пилы, не хватает только какого-нибудь упора для резки многочисленных деталей одного размера, чтоб каждый раз по рулетке размер не отмечать
Bought this for my friend for his birthday, and he loves it. Father-in-law was a little jealous, even. :) Built solid, but light enough to move around for projects. Easy to use th-cam.com/users/postUgkxPeGkHOMe05FySypTOvYumxMn-xi39oRe and makes great precision cuts. Doesn't come with a laser mount, but the fence is straight as an arrow and if you measure carefully, it's not a problem. Can handle dimensional lumber with ease, but of course, there's a limit to how thick. Handled a 4x4" post without a problem, but 4x6" we had to flip and cut twice. Only thing we've noticed is make sure to tighten the nut that holds the saw blade when you take it out of the box and maybe check up on it occasionally. For some, this is probably a no-brainer, but we neglected to do this and a few months in, found the motor running but the blade spinning at about half speed or less. Tightened the nut, and problem was solved. Very happy with this purchase. Dewalt makes sturdy stuff.
Me encantó el banco para cortar caños no me animo hacerlo y me hace muy mucha falta como puedo hacer para comprar uno obtenerlo de algún modo esta buenísimo me encanta
I like it. One thing I’d have done differently (and it would have limited my flexibility) I wouldn’t have made the rollers height adjustable. I would have made them perfectly level with the cutting bed of the saw and welded them at that height. I can almost see a reason to adjust height, but I can’t figure out why I’d need that yet. I’m sure it will come to me at some point…
Thanks man I appreciate it, the reason I made the height adjustable is because it don't fully trust the flatness of my shop floor and the fact that I like to be able to move things around as part of optimizing my workshop infrastructure.
Very nice job. Great use of recycling. Hopefully you get great use out of it my friend. Keep up the great craftsmanship and hard work my friend. Weld on. Fab on. Keep making. God bless.
Интересное решение с подающими роликами, с их регулировкой, возьму на заметку, автору спасибо за идею и за видео!!!
Очень классный верстак для пилы, не хватает только какого-нибудь упора для резки многочисленных деталей одного размера, чтоб каждый раз по рулетке размер не отмечать
Bought this for my friend for his birthday, and he loves it. Father-in-law was a little jealous, even. :) Built solid, but light enough to move around for projects. Easy to use th-cam.com/users/postUgkxPeGkHOMe05FySypTOvYumxMn-xi39oRe and makes great precision cuts. Doesn't come with a laser mount, but the fence is straight as an arrow and if you measure carefully, it's not a problem. Can handle dimensional lumber with ease, but of course, there's a limit to how thick. Handled a 4x4" post without a problem, but 4x6" we had to flip and cut twice. Only thing we've noticed is make sure to tighten the nut that holds the saw blade when you take it out of the box and maybe check up on it occasionally. For some, this is probably a no-brainer, but we neglected to do this and a few months in, found the motor running but the blade spinning at about half speed or less. Tightened the nut, and problem was solved. Very happy with this purchase. Dewalt makes sturdy stuff.
Bot
Gostei da ideia , to precisando montar minha bancada aqui , nao aguento mais cortar ferro no chão kkk que DEUS ilumine seu trbalho parabéns
Meus parabéns,faz tempo que tento montar uma base giratória para minha policorte Bosch e não sobra tempo 😅
Лучшее по функционалу и лаконичности решение
Me encantó el banco para cortar caños
no me animo hacerlo y me hace muy mucha falta
como puedo hacer para comprar uno
obtenerlo de algún modo
esta buenísimo me encanta
great job.
I like it.
One thing I’d have done differently (and it would have limited my flexibility)
I wouldn’t have made the rollers height adjustable. I would have made them perfectly level with the cutting bed of the saw and welded them at that height.
I can almost see a reason to adjust height, but I can’t figure out why I’d need that yet.
I’m sure it will come to me at some point…
Thanks man I appreciate it, the reason I made the height adjustable is because it don't fully trust the flatness of my shop floor and the fact that I like to be able to move things around as part of optimizing my workshop infrastructure.
Netjies gedoen! Hoe bly jy so skoon. Ek is altyd tot op my ore swart
Great idea! I'm a beginner in welding. Question: What chop saw and blade do you use in the video? Thanks in advance
Makita 1230, la adoro!!!
Very nice job. Great use of recycling. Hopefully you get great use out of it my friend. Keep up the great craftsmanship and hard work my friend. Weld on. Fab on. Keep making. God bless.
Thanks Jared
Top😊😊
you are awesome bro
Excellent job!
Nice 👍
Oye amigo me podrías la marca y modelo de tu cortadora de metal se ve q funciona genial?
Makita LC1230
Excelente …👏👏👏👏👏👏👏
welding in shorts bare arms and light gloves??
Sure, felt like living on the edge that day...
All jokes aside, I am aware that is not best practice...
It's fine, he's South African, most of us do it like that.
Amigo qual o modelo desse disco por favor queria colocar na minha policorte
🔝👌
👍👍👍👍👍
Очень интересное решение поворота пилы
Что то мне подсказывает нужно переделать
Porfabor que lo traduscan en español
Cool
Você faz nessa velocidade e não fala nada é pra ninguém copiar? Faço corte na policorte e não precisa nada disso!
Не продашь?
What's that blade cost and where can we buy it bro?
www.amazon.com/Makita-90875-12-Inch-Ferrous-Cutting/dp/B0007SXHKU
What brand the cut off machine?
Hi it's a Makita LC1230
What kind of edge scribe is that?
Hi, it's one that I made a while back, here's the video link if you want to check it out.
th-cam.com/video/wlcgqHTY-EU/w-d-xo.html
Cómo puedo comprar un disco de corte de metal k no sea de pasta?
depende a cuántas revoluciones trabaje tu cortadora
@@jaimelopez560 los k se usa normal aquí en mexico
lekke
Kwaai