Remove and Install Swingarm - Stark Future

Steps:
** REMOVAL **
Remove chain
Remove chain link
Run the chain through the front sprocket
Remove rear wheel
Loosen rear axle lock bolt
Push lock bolt
Remove lock bolt and tension adjuster
Remove wheel axle
Release chain
Slide the wheel out
Remove rear brake assembly (foot brake)
Loosen brake pedal link bolt
Hold spring
Loosen master cylinder bolts
Remove brake assembly
Remove rear mud flap
Remove rear mud flap bolts
Slide rear mud flap forward
Remove pull rod
Remove chain slider bolt
Remove pull rod lock nuts
Pull bolts out
Loosen axle clamp bolt
Remove axle
Remove swingarm
** INSTALLATION **
Hold swingarm in place
Insert axle
Tighten axle to 45 Nm
Tighten clamp bolt to 35 Nm
Install pull rod
Insert the bolts
Tighten lock nuts to 60 Nm
Tighten chain slider bolt to 5 Nm
Install rear mud flap
Slide the rear mud flap backward
Tighten bolts to 3 Nm
Install rear brake assembly
Insert the brake line in the bracket
Install brake caliper
Hold the master cylinder in place
Tighten bolts to 10 Nm
Install the brake pedal link
Tighten link bolt to 10 Nm
Install rear wheel
Slide the wheel in
Ensure the brake disc slides between the brake pads
Insert wheel axle
Install tension adjuster
Tighten axle lock bolt
Install chain
Run the chain through the front sprocket
Install chain link
Insert a piece of cloth in between the chain and the wheel sprocket
Tighten axle lock bolt to 80 Nm
Remove the cloth
Check brake operation before operating the bike