Right about that one, it would somehow lessen the damage on sliding or crashing but don't expect for it to look like nothing happened. Shit happens and when it does you'd be grateful you have them bars on. Love the review mate 👌
I just purchased a 2019. I absolutely love it! Just made my first payment! Forward controls just came out not too long ago but they retail about 500us. I wanted a stretch out option, highway pegs, but might just purchase the front bar and then have the best of both worlds. Mid controls and highway pegs... not sure.... thanks for your videos! Keep up the great work! Much love from Minnesota USA
That's some dedicated to put the bike on it's side for us. Thanks brother, looking to get some crash bars similar to this, just worried about sacrificing the little bit of lean angle I have already.
With your risers, where did you find the extension cable for the speedo? I have a street bob with the same but it’s low, was looking for the bw Murdock riser but curious about the wiring for the speedo. Thanks in advance.
I am thinking of getting some of these but really expensive over here in the U.K...What's the clearance like from bar to back of front fender/mudguard? I have a Pyramid plastics fender extender to keep the road crap off my oil cooler on my 2022 street Bob and want to keep it but was wondering if you would be kind enough to measure from front of bar to back tyre? would appreciate it...kudos for laying your bike down!
AranciacruZ I replaced mine but you don’t have to as long as you stay under the 12inch total handle bar rise. Fuel cap is a Sportster HD flush cap...check out my channel...all the videos for all my bike parts are on it 🤘😉🤘
StreetBobberVlogger I have the same bike and put a Bunking crash bar. I have the stock air filter, find that when I place my right foot on the bar, the stock filter digs into my leg. I have a Heavy Breather on the way, see you have the traditional round. I hope the HD Heavy Breather will give my leg more clearance. Thoughts?
John Thomas Yep I had the same thing happen to me. I have the high flow breather now and it’s better on my leg but still in the way. I think you will find it still rests on it but might just miss it if you are lucky with the heavy breather🤘
Hi! First really nice video, it helps to understand how this kind of bars can protect the bike! I have a question about your bike equipment if I can .. just wanna know the hand protectors that are you using Thanks!
Agreed, looks like the bar would lift the front wheel up off the road, at least when the footpeg lifts during cornering you have a warning to back off.
good video, liked it!....Q4u....y r they so exp. compared to conventional crash bars being less metal? and also, i only see harleys with these, where can i find them for metric bikes? thanks!
They're bloody heavy aren't they, my Fatboy Lo Special weighs a ton. How much was your fully comp insurance, mine was nearly 700 for the 1st yr then it went down to about 300, I had spent the last 25 yrs in Oz & they wouldn't recognise any of my no claims from there. I'm 61 & have ridden since 1974 👍👍😎
Hedonist - hahahahaha I wondered how long it would take before I got one of these comments...turns out, straight away! Sorry buddy I’m not normally one for it but couldn’t resist 🤘
@@StreetBobberVlogger id do the same thing at some point I'm sure lol. Pleeeeease don't make it a habit lol, it's always a bummer for the viewer. Video would have still kicked ass without it!
wow most people wouldnt go through the trouble you have on showing us this. Lots of respect. Thank you.
Right about that one, it would somehow lessen the damage on sliding or crashing but don't expect for it to look like nothing happened. Shit happens and when it does you'd be grateful you have them bars on. Love the review mate 👌
I just purchased a 2019. I absolutely love it! Just made my first payment! Forward controls just came out not too long ago but they retail about 500us. I wanted a stretch out option, highway pegs, but might just purchase the front bar and then have the best of both worlds. Mid controls and highway pegs... not sure.... thanks for your videos! Keep up the great work! Much love from Minnesota USA
That's some dedicated to put the bike on it's side for us. Thanks brother, looking to get some crash bars similar to this, just worried about sacrificing the little bit of lean angle I have already.
I just bought that seat. Hope I like it I do all day rides. Thanks for the awesome review of the bung king btw!
Thank you, thank you. This was super helpful. I just got a new low rider and I’m always worried about dropping it.
thanks man. it takes a lot of guts to even thinks about laying a bike down.
Dylan Smith no worries 👌 🤘
i layed a bike down once to prevent becoming superman. probably would've been better to be superman lol
@@StreetBobberVlogger how have you found cornering on UK roads, uphill hairpins that sort of thing, any scrapping so far?
With your risers, where did you find the extension cable for the speedo? I have a street bob with the same but it’s low, was looking for the bw Murdock riser but curious about the wiring for the speedo. Thanks in advance.
Brave mate!! Thanks for showing that !
Was it hard to install the front crash bar and the passenger pegs?
Hi, where did you bought the crash bar? In Europe?
Great video mate...cheers
What are the name of those bars and how much are they
Did you buy the bung king crash bar from a uk distributor? Or was it a case of ordering from US an coughing up import taxes
great review! you've convinced me!
The rear crash bars mounted up with an aftermarket exhaust no problem?
I am thinking of getting some of these but really expensive over here in the U.K...What's the clearance like from bar to back of front fender/mudguard?
I have a Pyramid plastics fender extender to keep the road crap off my oil cooler on my 2022 street Bob and want to keep it but was wondering if you would be kind enough to measure from front of bar to back tyre?
would appreciate it...kudos for laying your bike down!
Did you take anything off to install the crash bars ?
Which handlebar is that? I want it
Did you have to replace the cables with high risers? And what brand is gas tank cap? Thank you great video
AranciacruZ I replaced mine but you don’t have to as long as you stay under the 12inch total handle bar rise. Fuel cap is a Sportster HD flush cap...check out my channel...all the videos for all my bike parts are on it 🤘😉🤘
StreetBobberVlogger I have the same bike and put a Bunking crash bar. I have the stock air filter, find that when I place my right foot on the bar, the stock filter digs into my leg. I have a Heavy Breather on the way, see you have the traditional round. I hope the HD Heavy Breather will give my leg more clearance. Thoughts?
John Thomas Yep I had the same thing happen to me. I have the high flow breather now and it’s better on my leg but still in the way. I think you will find it still rests on it but might just miss it if you are lucky with the heavy breather🤘
Hi!
First really nice video, it helps to understand how this kind of bars can protect the bike!
I have a question about your bike equipment if I can .. just wanna know the hand protectors that are you using
Thanks!
Those are Memphis Shade Hand guards
Many thanks 👍👍😎
Thanks for doing this video
Did you install them? And If so, was it easy ?
I put a mustache up front and am putting passenger peg sliders on. If n when it tips I’d cry if I scratched it all up or broke something.
Do the crash bars affect cornering at all? Some people think they are not safe.
Tom Sawyers that’s what I was thinking 🤔
Agreed, looks like the bar would lift the front wheel up off the road, at least when the footpeg lifts during cornering you have a warning to back off.
good video, liked it!....Q4u....y r they so exp. compared to conventional crash bars being less metal? and also, i only see harleys with these, where can i find them for metric bikes? thanks!
J Marciano they are bungking so exp🤷♂️ but they saved my bike from expensive repairs so happy I have them
Thanks!
Could you give us your opinion on wether the passenger pegs would be comfortable or not?
Andy Nelson I’d say extremely comfortable as they are a wide diameter and are long 👌
Why did you go for bung king over motera ?
thanks for scratching your brake lever, and maybe derby? to do a test/comprehensive review for us. stay safe, ride safe!
Great new intro mate, definitely a keeper.
Any Video on how to install these pegs? i have them ordered for my 2019 fxbb
Rony Gilot sorry had the garage install the pass an ever pegs
@@StreetBobberVlogger I was able to do it. Was actually fairly easy
Did the bike itself turned the hazards on when tilted?
tom rebel yes, so the hazards come on and you have to start the engine and manually turn them off before they will switch off. 👍
how wide are the bars
Generation Asian 30” www.dragspecialties.com/products/?partNumber=06011024
Awesome video. Peace
tccoup355 thank you 🤘🤘🤘
Does a HD mustache engine guard have the same width?
DJ Chris no Bung King is wider but not by much
I’ve got the Harley mustache and am adding the rear peg sliders. Can’t do much better
Will they fit if you have Harley forward controls?
Intros awesome
They're bloody heavy aren't they, my Fatboy Lo Special weighs a ton. How much was your fully comp insurance, mine was nearly 700 for the 1st yr then it went down to about 300, I had spent the last 25 yrs in Oz & they wouldn't recognise any of my no claims from there. I'm 61 & have ridden since 1974 👍👍😎
Yeah my insurance is about the same as yours, 1st year around £700! Yep those insurance companies dont care about anything but making money!
Question what size are your risers ?
Douglas Montalvo 8” risers
Thanks having my setup installed tomorrow
Hi mate, where did you get the handguards from?
SRITHAR SIVALINGAM Memphis Shades memphisshades.com/products/hand-guards-harley-fxbb-softail-street-bob 🤘
I like these hand guards
jdcustomsandfabrications.bigcartel.com/product/stainless-steel-coffin-cut-hand-guards
You sound like Ace trainer Liem. Lol A Pokémon TH-camr. Hahaha
Colton Deese 😂 I’ll have to check them out 🤘
Damn, I was excited for this channel but just a few weeks into it and I'm already seeing click bait titles and thumbnails ? Great....
Hedonist - hahahahaha I wondered how long it would take before I got one of these comments...turns out, straight away! Sorry buddy I’m not normally one for it but couldn’t resist 🤘
@@StreetBobberVlogger id do the same thing at some point I'm sure lol. Pleeeeease don't make it a habit lol, it's always a bummer for the viewer. Video would have still kicked ass without it!
Hedonist - don’t worry I don’t intend on being one of those channels 👌 It’s nice to see people care about the channel 🤘
Your video makes me dizzy ~~