Thank you I have problems with connection in the beginning start the device is connection with PC by com1 but after one hour the mouse is moving and no work . When I leave the cable the mouse is working
Thank you for the Video, I do not have a COM port in my machine, but I successfully managed to have a Virtual COM on my Machine, my objective is to connect a GPS device to a GIS software, and the software only makes a connection through a COM Port? Any Ideas will be really helpful:)
Thank u so much , i have a problem when i try to connect my Cash register with my Laptop , i bought these Cable rs233 and this USB which u show on this Video but it does not work (Communcation error 31 ) can u help me please
hi, thank you in advance .. is it possible if i want rs232 serial to mini USB? because there are many in the market that USB to Serial RS232, what if you want to change it to the opposite? so data communication between serial rs232 to USB.
If there is no COM-port and no LPT-Port in your motherboard (like in most laptops today) or there is one but it is not activated in the BIOS or you don´t have one connected, of course that section doesn´t appear in the device manager
Im trying to use my arduino nano.I had to download the driver. That works but it chose com 7. I* have only 2 usb ports on the front of my pc, I assume they are 3 and 4. 2 unused in the back. four total in the back. The nano still wont upload a program to it. I should just be able to connect the nano to the front usb ports, right?
I don´t quite understand your problem. USB-port numbering has absolutely nothing to do with the numbering of the (virtual) COM-port numbering. Change the COM-port number of your adapter to the lowest available number. Restart PC! And don´t forget to choose the right COM-port number in the arduino programming software!
@@KainkaLabs Thanks for your clear explanation. I have since been able to upload blink sketch. When I try to upload DHT11 sketch, I get the error EXIT STATUS 1. What does that mean?
![[페이스캠4K] 베이비몬스터 치키타 'FOREVER' (BABYMONSTER CHIQUITA FaceCam) @SBS Inkigayo 240707](http://i.ytimg.com/vi/x9VRNTV4VDI/mqdefault.jpg)
![[페이스캠4K] 베이비몬스터 치키타 'FOREVER' (BABYMONSTER CHIQUITA FaceCam) @SBS Inkigayo 240707](/img/tr.png)
![CAMPปลิ้น | EP.77[2/2] "รับทราบ" แก๊งเพื่อนรัก 10 ปี ที่ไปไหนก็มีตำนาน!](http://i.ytimg.com/vi/ifc0ofD51B0/mqdefault.jpg)
Thank you for sharing this setup. Good job!
Outstanding step by step explanation
Roger, thank you for the instruction you offered on your video as I followed it with great success!
Very good. Clearly explained. I'm learning alot. More videos please.
Very useful and well explained. Many thanks.
Thank you Sir, helped me a lot.
Thank you very much I learned a lot from your video
Thanks Kainka Labs i had a issue with communication with the panel after watching your video may be i can solve this communication issue. thankyou
Thanks this helped me alot
Awesome explanation thanks.!!
How to fix port (COM & LPT)?
Pliz help me
شكرا👍
very good i want explain how to install COM &LPT, PORT device manager and how to install USB console cable
Hey, i see com lpt/section and my device is shown as unknown but it never appears in the com/lpt section. Any ideas?
Thank you I have problems with connection in the beginning start the device is connection with PC by com1 but after one hour the mouse is moving and no work . When I leave the cable the mouse is working
Thank you for the Video, I do not have a COM port in my machine, but I successfully managed to have a Virtual COM on my Machine, my objective is to connect a GPS device to a GIS software, and the software only makes a connection through a COM Port? Any Ideas will be really helpful:)
Thank u so much , i have a problem when i try to connect my Cash register with my Laptop , i bought these Cable rs233 and this USB which u show on this Video but it does not work (Communcation error 31 ) can u help me please
Are u from Germany?
hi, thank you in advance .. is it possible if i want rs232 serial to mini USB?
because there are many in the market that USB to Serial RS232, what if you want to change it to the opposite? so data communication between serial rs232 to USB.
Data comunication is alway duplex (both directions) in a USB-Serial converter. No matter what type of chip or what kind of connector is uses.
in the divice manager i do not have that file (com-lpt) how do i find it to be able to id the ports and port numbers...
sorry win 10
If there is no COM-port and no LPT-Port in your motherboard (like in most laptops today) or there is one but it is not activated in the BIOS or you don´t have one connected, of course that section doesn´t appear in the device manager
Im trying to use my arduino nano.I had to download the driver. That works but it chose com 7. I* have only 2 usb ports on the front of my pc, I assume they are 3 and 4.
2 unused in the back. four total in the back. The nano still wont upload a program to it. I should just be able to connect the nano to the front usb ports, right?
I don´t quite understand your problem. USB-port numbering has absolutely nothing to do with the numbering of the (virtual) COM-port numbering. Change the COM-port number of your adapter to the lowest available number. Restart PC!
And don´t forget to choose the right COM-port number in the arduino programming software!
@@KainkaLabs Thanks for your clear explanation. I have since been able to upload blink sketch. When I try to upload DHT11 sketch, I get the error EXIT STATUS 1. What does that mean?
How to install ittt
usb-com shows yellow indication
drive software how i get
via Windows Update or the manufacturer site of the USB-COM Port adapter
POrts(Com and LPT) is not showing