To see machine compatibility, head over to the Magic Mat product pages, and under "Description & Details" you will find a list of which machines each Magic Mat is compatible with. You can also see sandwich configurations for various machines on the main product images.
I've been doing this for years with a self healing mat!!!, not very magic when you know how and what to use! I bet this costs more than a self healing mat too, it's amazing what you can charge when you change the name of a simple product that already exists! X
Actually, I purchased a self healing mat that my husband cut into 2 pieces for me to use in my Gemini Jr. It worked fine for a while but then not only did it warp (bend) but it warped in the middle of the plates with big bubbles. I was no longer able to use them! I am really doubting that this going to be any better. I heard of another type of mat that I saw somewhere (unfortunately, I don't remember where) that was guarantee not to warp. Made out of some different type of material. It was pricey, but if it works, I would rather spend my money on that one (if I can find it)! I will wait to see how long this one lasts with my friends.
@@gobarb26 Is the i-Crafter mat the other mat you heard about? I have been using an i-Crafter mat (light use) for a few months, and I am very happy with it. It hasn't warped at all. I'm curious about the Magic Mat, too, and I'd like to try it out.
Just received all three magic mats. Will be trying them out today! I would like a larger size for the sizzix pro machine. I would like to see embossing as well demonstrated.
I am happy to see I am not the only one having trouble. My mat did the same thing. I’ve only had it since this Christmas season and already isn’t cutting. I followed the article that was posted here and it doesn’t help at all. It basically just gives advice to make sure you have a good sandwich (which most of us do) and it also says to check your shims on your machine. Guess what? my machine works perfect with the two plastic plates. So yeah.. not good.
As it seems there’s little to no response to our queries to this Y.T.’r, I put this question to any and all who may have tried this product: I’d like to know if this mat is COMPARABLE to SELF-HEALING mats we find in craft stores or fabric stores? Is it stiff? Is it rubbery? I W O U L D very much like to find a fairly flexy kind of mat. - 2 actually - to use as a sandwich with my BigShot, on its base plate. After watching another TH-camr who promoted the idea of using a combination of “standard” cutting plates PLUS cut-to-size VINYL SHEETING. The number of vinyl sheet layers depends on the thickness required needed to make the dies cut the paper. I’ve been VERY impressed with the results I’ve had with this lady’s findings. Apparently, all this time, what we all needed to achieve clean cuts from our dies, was a cushier surface for the die’s sharp edges to embed into. Rotating and flipping is still required, but I think this will help to maintain the r e l a t i v e flatness of our plates. My question still stands, though, about the Magic Mat, because part of my BigShot sandwich includes a couple of flexy cutting pads.
Wow, it's been a year and NO ONE has responded to your query?! I would say that the mat is similar to self-healing mats you might find elsewhere. However, it is much thicker than my Olfa self-healing mat that I use when I sew. The mat is somewhat stiff, but you could still bend it. I would say not rubbery. The dies DO cut into the mat slightly. I use two magic mats in my Spellbinders Platinum because the mats are not the same size (length & width) as my base, and if I only use 1 magic mat, then my top layer (the Spellbinders clear plate) wants to warp. It works better if I lay the two magic mats side by side to cover my entire base plate. I hope this makes sense.
@@CatGetsCrafty Many thanks for responding! Since my initial query I’ve been using 2 sheets of Joann’s heaviest vinyl, cut to match the size of the cutting plates of my Sizzix BigShot Plus (wide platform), and changing them out as needed (due to the cuts they have to endure). In the year plus I’ve been using this set up, my clear plates are no worse for wear from cuts, and show NO signs of WARPING! Yes, I DO go through a set of vinyl sheets about (I’d say) every 6th time I cut a couple of dozen or more diecuts. That may seem a major waste of resources, however, with paper crafting seemingly “falling out of favor” (and therefore Sizzix plates made specifically for our BigShots becoming scarce), it seems a more practical solution to use a “substitute” item that is readily available AS IT’S NOT SPECIFIC TO PAPER CRAFTING!! Not only more readily available, but less expensive, too! Be well, and happy holidays!!
@@kkrolf2782 I'm glad you found a solution. I think the Magic Mat might work for you, and could potentially cost less (it retails for $14.99). With the use of the Magic Mat, I only use one clear plate in my sandwich, and it doesn't really warp. And, since the dies cut into the mat, I don't see any damage to my clear plate either. I already had the smaller Magic Mats, but am thinking of buying the 9"x15" to use with my Spellbinders Platinum, and cutting it down a bit as it's a bit longer and wider than the Platinum opening.
I was hoping I could see a sample of coordinating dies that go with the stamps shown using the Magic Mat. I don't cut intricate dies. I am an extreme beginner to the craft and I only cut stamped images with it's coordinating dies, mostly. All the samples you showed was with intricate dies. I wish you could have tried the other dies.
That's because regular dies cut easily and intricate dies sometimes is a hit or miss. Because they are intricate sometimes they fail to cut unless you add more paper or play with the sandwich. Regular dies won't fail unless you don't have the right original sandwhich. There's no need to show it as there is no reason why it wouldn't work.
@@prettypaperthings Oooooooh, gotcha! Thanks. I'm looking into the standard size Magic Mat, but it's sold out. So I'm wating for it come back in stock.
Hi there! You can find machine compatibility on the individual product pages here: www.scrapbook.com/store/collection-brand/magic+mat-scrapbook+com.html 😊
Hi Mary! You can learn which machines the Magic Mats are compatible with by viewing the product pages: Standard Magic Mat: www.scrapbook.com/store/sbc-mmat-1.html Extended Magic Mat: www.scrapbook.com/store/sbc-mmat-3.html
Hi Neha! You can find the list of compatible machines on the product pages: www.scrapbook.com/store/sbc-mmat-1.html www.scrapbook.com/store/sbc-mmat-3.html
Hi there! You can view machine compatibility on the individual product pages here: www.scrapbook.com/store/collection-brand/magic+mat-scrapbook+com.html
The Extended Magic Mat works with the Cuttlebug: www.scrapbook.com/store/sbc-mmat-3.html We are also releasing a Magic Mat for the Cuttlebug, sign up to be notified when it's available: www.scrapbook.com/store/sbc-mmat-5.html
At 17:47 time stamp you show a Sizzix sidekick.... but the description says it is NOT compatible with this machine. Can you please clarify if the mini will work with a Sidekick?
That is a We R Memory Keepers Mini Evolution die cutting machine at 17:47 time stamp (not a Sizzix Sidekick). I too want to know why mini mat will not work with the Sidekick.
@@cindydecker57 there is a evolution machine in the time stamp I mentioned, but I was referring to the sizzix machine “at three o’clock” in reference to that. ( behind it slightly and to its right)
@@tanyaperrin1218 Ohhh I see what you are saying ... there is a Sidekick in the group shot with the Magic Mini mat sitting on its platform ... wonder why they didn’t show this one in the demo as I would expect that many people asked about it.
@@cindydecker57 I know right? I’m hoping that they address these questions so that when they do come back in stock we will know which ones will work. I think a comprehensive list of compatible machines in the description will clarify everyone’s questions lol
@@tanyaperrin1218 I ordered the Mini (and the other two sizes) before I read the descriptions 🤪 (I figured they would sell out fast) ... I’ll try it out with my Sidekick and see how it goes.
I have a Cuttlebug and my B plates have wrapped, but I still use them with a self healing mat I cut to size. My sandwich: A plate B plate Die/cardstock Self healing mat B plate
No, it's different. The embossing mat is used to help make an embossed impression on the cardstock, a self healing mat is a bit more durable and you can take an exact knife and cut cardstock on top of the self healing mat and the self healing mat absorbs the cut. For better explanation, you can look up the differences. I only use the embossing mat to make impressions on paper and the self healing mat as a shim bc my plates are well used and I need the extra pressure when using my die cut machine. Hope this helps, again just look online and it will give you a better explanation:)
Does the magic mat work on both platinum and platinum 6 spellbinders machines? Can you use two mats for steel rule dies and wafer thin dies on the spellbinders? Tia
Neither your Y.T. video description, nor the info panel below the video screen, mentions whether the Magic Mat is considered a "self-healing"-type cutting mat -- Is it?? And...will the Magic Mat warp over time as do the plastic plates we've been using in our manual die cutting / embossing machines?? Thank you for your input.
This mat is very exciting and revolutionary. It can be a big money saver as I go through plates quite often. I wonder if this will void the warranty or implied warranty with the manufacturer for not using their plates. Thank you for sharing this being used.
I bought them to use with my Cuttlebug and Big Kick. Thanks for showing the Cuttlebug, I'm glad it can be functional again and that I didn't get rid of it.
@@thatladynikki Yes, it's a shame they stopped supporting it when many, many people own one! For so long, Cuttlebug was the only practical choice for people on a budget.
Seems there is some contradictory info put out by scrapbook.com. I watched a video where the standard magic mat was used with the Gemini jr but I got an email that specifically said you can’t use the standard mat, you need the extended mat for the junior. Which is it?
I just received my Magic Mats (I got two) yesterday an absolutely love them!! I had been using self healing mats, but the Magic Mats work much better! I have a Big Shot Plus and use only the A adapter, not the A and B, and I get fabulous results. I have used many of my intricate dies and they all cut out perfectly. In the last 24 hours since my Magic Mats arrived, I have done SO much die cutting as I find it so much easier - all the tiny bits just fall out of the die cut. I found the old acrylic plates quite heavy for me to handle. The Magic Mats are so light and much easier and more efficient to use. THANK YOU Scrapbook.com, I LOVE my Magic Mats!! And thank you for getting them to me SO quickly! I live in New Zealand and was not expecting my mats to arrive until December!! Awesome service and awesome product!! Stay well:-)
@@debbiegordy7764 Sure! I just love these Magic mats because they cut all my dies out so easily. Even the very intricate ones. I have 2 self healing mats, but they don't give me a clean cut like the Magic mats do. I wouldn't use any other mats, having used the Magic mats. And no, I am not paid to say any of this! I just love them! Stay well and keep crafting:-)
@@debbiegordy7764 Thank you! I've had a bit of a rough ride lately I have M.E. and have been so very tired/fatigued. Crafting helps me relax and forget about my health for awhile:-) xx
I’m so sorry to hear that. I have chronic pain and am mostly confined to my bed too, so crafting is my therapy and happy place. I hope you find relief soon! Happy crafting to us, making good memories! 😘
It would’ve been nice if you would have explained to the viewer what a magic mat actually is and what it does. Not all of the viewers are well versed in the paper craft world. To assume so, was your first mistake. Second, your title is a bit deceiving since you didn’t answer any specific questions. So, what I got from watching is it works in the majority of die cutters, especially the most popular ones. Second, it does not go to the width of some of the wider ones like the Big Shot Plus. I’m guessing it’s around six inches wide, which is of no help with the bigger dies. Lastly, it is supposed to work with all of our dies in that it will be easy to poke through all of the paper bits that had been cut out. Question, what about the other cutting plate you’ve been running through? Won’t it get all curvy as it has in the past? Would you recommend crafters to get two, therefore, not having to worry that one of them will warp and have to be replaced often. Or, are we only fixing one of the plates, not both? I know I’m sounding snippy, I’m just upset the a lot of people just assumes everyone will know what the heck they are talking about. All of the paper crafters have started somewhere, even if it’s just for inspiration to get their creativity flowing. We have all started form somewhere and none have been proficient in their first time around. Please, the next time a video is being made, stop for a moment and envision yourself as a beginner and what questions you would have if so. It’s all I ask. Thank you for your time. Be well
Hi there! We have many resources available to learn all about the Magic Mat! You can read about it on our blog: www.scrapbook.com/mat You can watch the first video we made about the Magic Mat: th-cam.com/video/W-HuOaMmiRU/w-d-xo.html
I am late to the magic mat. I recently bought same. I was very excited and went into a die cutting frenzy. My early cuts were great. However as I got to more intricate dies, I started having issues. I am not getting nice clean cuts as shown here. parts of the die cut fine and others not so fine. The best results seem to have come by running the cut through 4 times! What am I doing wrong?
To see machine compatibility, head over to the Magic Mat product pages, and under "Description & Details" you will find a list of which machines each Magic Mat is compatible with. You can also see sandwich configurations for various machines on the main product images.
aww, I was hoping for actual questions answered, or even some hacks for the Magic Mat, instead of just showing the sandwiches for every die cutting machine currently sold and if the magic mat works at one size, wouldn't all of them work as long as they fit? Showing how to use the standard and the mini pad on the extended platform is a bit superfluous. Maybe its just me, but I was hoping for some good info on other ways to use the magic mat. How to partially die cut, or using a folded card to make the die cut go through both sides for a double see thru or shaker card. Things like that. But then again, there are many newbies in the papercrafting world the same as I was when I bought one of the first grand wizard die cutting machines from Spellbinders. Anyone else remember that machine? It was responsible for the die cutting monkey, now gorilla, on my back.
Please show the use on the Sizzix Foldaway. It seems to be an odd duck of the group. You can't even use the precision cutting plate because of higher than normal pressure.
I have the Big Shot Express, too. I saw the part when she showed the Gemini. I assume it would work on other electronic die cutting machines too. However, you're right. I would rather like to see it done on the Big Shot Express, too.
I have the sidekick and a mini mat and cannot get mine to work, I was hoping they would do a demonstration so I could see if I was doing it wrong. Hopefully someone will see your question and offer some advice
Hi there! You can find machine compatibility on the individual product pages here: www.scrapbook.com/store/collection-brand/magic+mat-scrapbook+com.html 💕
Wondering if these mats work with the AG empress machine? I have a couple of hand crank type machines that work with these mats thank you so much scrapbook.com for making our crafting life much easier and more affordable...
Doesn’t work for me. Sizzix big shot plus and sizzix big shot foldaway..ok.. on the big shot plus I made the mistake of using only the AAdapter. I’ll use both of them
I just bought the magic mat and magnetic mat, I have a cuttlebug. Are you using these sandwiches only for thin dies? I have lots of mosaic moments dies will it work using thicker dies. What sandwich do I use for those? Thanks
@@prettypaperthings The magic mat was made for different die cutting machines, but I do not see a mat for larger machines like the fiskars fuse and sizzix bigshot pro. The magic mat would come in handy for the bigger machine I have.
I have an Anna Griffin Empress machine. Does one of the plates work for this machine? If this has already been answered, please forgive me. I read a LOT of comments, and didn't find it.
Even after my regular cutting plates break in half I continue using them for hundreds of more successful cuts (using a tissue to protect the paper from becoming "embossed" by the damage.) I would like to see how a SUPER USED magic mat fares... Do they continue to cut cleanly even after lots of scarring?
Yes, they do. I flattened a warped plate by soaking it in hot water to remove the little bits of paper that were stuck in it and have used it for many more cuts since then.
What about the cut and boss, thank you, also this is slightly smaller than the big shot plus and the gemini, I know the extended plate would fit but do you plan to do one to fit the cut and boss. Thank you x
Thank you so much for sending and posting this excellent tutorial. I have a Cuttlebug, Big Shot, and a Gemini Jr. Great information. My Magic Mat is on the way and I can hardly wait to get it. I've waited a long time for it to be in stock again.
I bought this as soon as it was available. I used it right away and it absolute great. It cuts fantastic on intricate dies every time. I'll work on getting the rest of them when they are in stock.
A friend gave me the standard size Magic Mat. It has changed my die cut crafting experience. I love it so much that I’m going to get the extended and mini too.
Hi Cindy! You may find this article helpful: www.scrapbook.com/articles/mat If you need any extra assistance you can always reach out to our Happiness Specialists via email at support@scrapbook.com ☺
I don't understand what makes the magic mat so different. You could cut everything out the old way, with a bottom plate, that you can with the mat. I only just heard abt the magic mat, and this bideo is 2 yrs old. I'm way out of touch I guess.
Hi there! The Magic Mat is specifically designed to be a replacement for your cutting plate that gets cut into by the die, so you don't have to continuously replace your cutting plates! You can learn more here: www.scrapbook.com/articles/what-is-the-magic-mat?find=magic+mat 🥰
I was wondering since this video was done before Stampin Up came out with their Cut and Emboss Machine, if anyone has actually tried the Magic Mat in it and that it didn't work and that is why it is not listed as compatible. I would like to get the Magic Mat while on sale for my SU Cut and Emboss, but won't since it is not listed. If anyone has tried these mats in the new SU Cut and Emboss Machine I would like to hear from you - thanks.
Hi MaryKay! The Magic Mat is a Scrapbook.com exclusive! You can sign up to be notified when it is back in stock here: www.scrapbook.com/store/sbc-mmat-1.html
You show a Sizzix Sidekick at the beginning of the video, but I can't get the Magic Mat to work with any sandwich configuration on it. Is there another trick?
Thank you so much for this, I had a older model of the Cuddlebug and my B plates are shot I don't have the magnetic plate I see you using; would the standard size magic mat work as replacements for them.
Hi there Nadine! The Extended Magic Mat would need to be used for the Cuttlebug. In the video, the magnetic cutting mat was a replacement for the rubber cutting mat, so as long as you have that, you can build your sandwich like this: Platform, rubber cutting mat, Magic Mat, paper, thin metal die, B plate. 😊💗
It's actually quite a noticeable difference. A couple of benefits are my excess paper isn't picking up any lines from my scarred cutting plates, which kind of ruins any uncut paper. The other difference is the deeper curve on the edges, giving a little more dimension, and polished look to the finished die cuts. It also feels easier and smoother to crank.
For the Gemini I have found using the magic mat sandwiched between 2 Sizzix plates is the perfect sandwich. You place them into Gemini sideways. The Sizzix plates are a bit thinner and allows use of magic mat.
@@lcbiermannhg4h with the two Sizzix plates does your Magic Mat warp with just a few cuts? I can straighten mine out with the heat gun, but I don't want to do that every 3 cuts. I am using the two clear Gemini plates and the magic mat.
@@rachelrussell8538 the Gemini plates are a bit thicker so your sandwich is too tight. Try to replace one Gemini plate with a Sizzix plate. When the sandwich is too tight the mat warps.
@@rachelrussell8538 my mom has a Junior and she used 2 Sizzix plates and her magnetic shim with the magic mat. So you have to see what works for your machine. Less is more! Occasionally I have to use heat gun but not much
@@lcbiermannhg4h I bet you are exactly right. I wasn't sure about the thickness of the Sizzix plates and didn't want to order them since I don't have a Big Shot. In my original size Gemini, I can't use their recommended sandwich just for cutting. I am going to order a pair and try them out! My magic mat after 5-10 cuts looks like an S. I am so grateful for your comment. Thanks for you reply and suggestion!
I have the Sizzix Bk and I have the standard and extended magic mat I tried sever times and it won’t cut out my dies. I did the sandwich just as suggested several times it doesn’t cut. Do you have a suggestion?
I could have made my own. But this sure did save me the time of cutting them out. I'm very happy that they finally realized we wanted and needed this. Now get hopping! I need the regular size mat. You were sold out in one day!😠 which goes to show you, it was needed and wanted.
To see machine compatibility, head over to the Magic Mat product pages, and under "Description & Details" you will find a list of which machines each Magic Mat is compatible with. You can also see sandwich configurations for various machines on the main product images.
Thanks for getting back to me
I love that we can use the Magic Mat with the Steel Rule Dies too! I've had mine for a week now and it's everything you say it is! Love it!
I've been doing this for years with a self healing mat!!!, not very magic when you know how and what to use! I bet this costs more than a self healing mat too, it's amazing what you can charge when you change the name of a simple product that already exists! X
Actually, I purchased a self healing mat that my husband cut into 2 pieces for me to use in my Gemini Jr. It worked fine for a while but then not only did it warp (bend) but it warped in the middle of the plates with big bubbles. I was no longer able to use them! I am really doubting that this going to be any better. I heard of another type of mat that I saw somewhere (unfortunately, I don't remember where) that was guarantee not to warp. Made out of some different type of material. It was pricey, but if it works, I would rather spend my money on that one (if I can find it)! I will wait to see how long this one lasts with my friends.
Barbara Burgess i know what you mean. I had the same issue. My mat became pregnant.
@@gobarb26 Is the i-Crafter mat the other mat you heard about? I have been using an i-Crafter mat (light use) for a few months, and I am very happy with it. It hasn't warped at all. I'm curious about the Magic Mat, too, and I'd like to try it out.
Just received all three magic mats. Will be trying them out today! I would like a larger size for the sizzix pro machine. I would like to see embossing as well demonstrated.
I was so happy to get my mat. The first dozen or so cuts worked great but after that it won't cut the whole image. Any suggestions?
Hi Barbara, our article may be helpful www.scrapbook.com/articles/mat
I am happy to see I am not the only one having trouble. My mat did the same thing. I’ve only had it since this Christmas season and already isn’t cutting. I followed the article that was posted here and it doesn’t help at all.
It basically just gives advice to make sure you have a good sandwich (which most of us do) and it also says to check your shims on your machine.
Guess what? my machine works perfect with the two plastic plates. So yeah.. not good.
Thank you for including the Cuttlebug!
Thank you for sharing, this answers a lot of questions!
As it seems there’s little to no response to our queries to this Y.T.’r, I put this question to any and all who may have tried this product: I’d like to know if this mat is COMPARABLE to SELF-HEALING mats we find in craft stores or fabric stores? Is it stiff? Is it rubbery? I W O U L D very much like to find a fairly flexy kind of mat. - 2 actually - to use as a sandwich with my BigShot, on its base plate. After watching another TH-camr who promoted the idea of using a combination of “standard” cutting plates PLUS cut-to-size VINYL SHEETING. The number of vinyl sheet layers depends on the thickness required needed to make the dies cut the paper. I’ve been VERY impressed with the results I’ve had with this lady’s findings. Apparently, all this time, what we all needed to achieve clean cuts from our dies, was a cushier surface for the die’s sharp edges to embed into. Rotating and flipping is still required, but I think this will help to maintain the r e l a t i v e flatness of our plates. My question still stands, though, about the Magic Mat, because part of my BigShot sandwich includes a couple of flexy cutting pads.
Wow, it's been a year and NO ONE has responded to your query?! I would say that the mat is similar to self-healing mats you might find elsewhere. However, it is much thicker than my Olfa self-healing mat that I use when I sew. The mat is somewhat stiff, but you could still bend it. I would say not rubbery. The dies DO cut into the mat slightly. I use two magic mats in my Spellbinders Platinum because the mats are not the same size (length & width) as my base, and if I only use 1 magic mat, then my top layer (the Spellbinders clear plate) wants to warp. It works better if I lay the two magic mats side by side to cover my entire base plate. I hope this makes sense.
@@CatGetsCrafty Many thanks for responding! Since my initial query I’ve been using 2 sheets of Joann’s heaviest vinyl, cut to match the size of the cutting plates of my Sizzix BigShot Plus (wide platform), and changing them out as needed (due to the cuts they have to endure). In the year plus I’ve been using this set up, my clear plates are no worse for wear from cuts, and show NO signs of WARPING! Yes, I DO go through a set of vinyl sheets about (I’d say) every 6th time I cut a couple of dozen or more diecuts. That may seem a major waste of resources, however, with paper crafting seemingly “falling out of favor” (and therefore Sizzix plates made specifically for our BigShots becoming scarce), it seems a more practical solution to use a “substitute” item that is readily available AS IT’S NOT SPECIFIC TO PAPER CRAFTING!! Not only more readily available, but less expensive, too! Be well, and happy holidays!!
@@kkrolf2782 I'm glad you found a solution. I think the Magic Mat might work for you, and could potentially cost less (it retails for $14.99). With the use of the Magic Mat, I only use one clear plate in my sandwich, and it doesn't really warp. And, since the dies cut into the mat, I don't see any damage to my clear plate either. I already had the smaller Magic Mats, but am thinking of buying the 9"x15" to use with my Spellbinders Platinum, and cutting it down a bit as it's a bit longer and wider than the Platinum opening.
@@CatGetsCrafty Thx for your response, CGC. I m a y just take you up on the suggestion.
I use a Fiskars Fuse, will this work with my machine?
What about spellbinder?
I was hoping I could see a sample of coordinating dies that go with the stamps shown using the Magic Mat. I don't cut intricate dies. I am an extreme beginner to the craft and I only cut stamped images with it's coordinating dies, mostly. All the samples you showed was with intricate dies. I wish you could have tried the other dies.
As the intricate dies cut easily then coordinating dies will work just as well with the mat.
That's because regular dies cut easily and intricate dies sometimes is a hit or miss. Because they are intricate sometimes they fail to cut unless you add more paper or play with the sandwich. Regular dies won't fail unless you don't have the right original sandwhich. There's no need to show it as there is no reason why it wouldn't work.
@@prettypaperthings Oooooooh, gotcha! Thanks. I'm looking into the standard size Magic Mat, but it's sold out. So I'm wating for it come back in stock.
can you use this with the spellbinders platinum machine, It was not shown in this video, Thanks so much,
Hi there! You can find machine compatibility on the individual product pages here: www.scrapbook.com/store/collection-brand/magic+mat-scrapbook+com.html 😊
Why does the Mini Evolution sandwich have to go upside down? Wouldn't it also work the other way? *Ü*
Does any of the magic mats work with new big shot switch plus?
Yes! You can find machine compatibility on the individual product pages of the Magic Mats. 🙂
Can you use the Magic Mat with a Big Shot Plus? Or do you need to get a larger one?
05:10
Does it work with the Empress?
Hi Mary! You can learn which machines the Magic Mats are compatible with by viewing the product pages:
Standard Magic Mat: www.scrapbook.com/store/sbc-mmat-1.html
Extended Magic Mat: www.scrapbook.com/store/sbc-mmat-3.html
Which size of magic mat will work with regular Gemini machine ??
Hi Neha! You can find the list of compatible machines on the product pages:
www.scrapbook.com/store/sbc-mmat-1.html
www.scrapbook.com/store/sbc-mmat-3.html
What's the difference between these and a cricut?
Anyone know which one I can use with the Anna griffin Empress ??? 💛
Hi there! You can view machine compatibility on the individual product pages here: www.scrapbook.com/store/collection-brand/magic+mat-scrapbook+com.html
Can those plates work in the Cuttlebug?
The Extended Magic Mat works with the Cuttlebug: www.scrapbook.com/store/sbc-mmat-3.html
We are also releasing a Magic Mat for the Cuttlebug, sign up to be notified when it's available: www.scrapbook.com/store/sbc-mmat-5.html
At 17:47 time stamp you show a Sizzix sidekick.... but the description says it is NOT compatible with this machine. Can you please clarify if the mini will work with a Sidekick?
That is a We R Memory Keepers Mini Evolution die cutting machine at 17:47 time stamp (not a Sizzix Sidekick). I too want to know why mini mat will not work with the Sidekick.
@@cindydecker57 there is a evolution machine in the time stamp I mentioned, but I was referring to the sizzix machine “at three o’clock” in reference to that. ( behind it slightly and to its right)
@@tanyaperrin1218 Ohhh I see what you are saying ... there is a Sidekick in the group shot with the Magic Mini mat sitting on its platform ... wonder why they didn’t show this one in the demo as I would expect that many people asked about it.
@@cindydecker57 I know right? I’m hoping that they address these questions so that when they do come back in stock we will know which ones will work. I think a comprehensive list of compatible machines in the description will clarify everyone’s questions lol
@@tanyaperrin1218 I ordered the Mini (and the other two sizes) before I read the descriptions 🤪 (I figured they would sell out fast) ... I’ll try it out with my Sidekick and see how it goes.
Will this work with the Anna Griffin Empress?
Hi Michelle! Machine compatibility can be found on the product pages:
www.scrapbook.com/store/sbc-mmat-1.html
www.scrapbook.com/store/sbc-mmat-3.html
Re Cuttlebug...I don't have a magnetic plate for it...my plates are still in good shape, but this magic mat is intriguing!
I have a Cuttlebug and my B plates have wrapped, but I still use them with a self healing mat I cut to size.
My sandwich:
A plate
B plate
Die/cardstock
Self healing mat
B plate
@@SuS-mu9qm is the self healing mat the same as embossing mat?
No, it's different. The embossing mat is used to help make an embossed impression on the cardstock, a self healing mat is a bit more durable and you can take an exact knife and cut cardstock on top of the self healing mat and the self healing mat absorbs the cut. For better explanation, you can look up the differences. I only use the embossing mat to make impressions on paper and the self healing mat as a shim bc my plates are well used and I need the extra pressure when using my die cut machine. Hope this helps, again just look online and it will give you a better explanation:)
@@SuS-mu9qm ok thank you☺
Glad to know that my Cuttlebug is not obsolete! I LOVE that little thing!!
I'm disappointed that you didn't discuss the Spellbinders Platinum machines. Surely there are more of those in use than the Mini Evolution.
Check out other You Tube videos.
I agree! We wasted 18 minutes waiting for the Spellbinders demonstration!
@@debbiegordy7764 more people have the Sizzix and Cuttlebug . Go to their website
Does the magic mat work on both platinum and platinum 6 spellbinders machines? Can you use two mats for steel rule dies and wafer thin dies on the spellbinders? Tia
Would like to see this being magnetic.
Can embossing folder used magic mat to embossing machine?
Yes!
Neither your Y.T. video description, nor the info panel below the video screen, mentions whether the Magic Mat is considered a "self-healing"-type cutting mat -- Is it?? And...will the Magic Mat warp over time as do the plastic plates we've been using in our manual die cutting / embossing machines?? Thank you for your input.
th-cam.com/video/s7g1xPwmha4/w-d-xo.html at 57 seconds in
There's a video here on how to clean and unwarp really easy
I received the mat and I am in love with it. I am going to order the remianing sizes. Thanks for making our crafty time easier and enjoyable 😍😘
This mat is very exciting and revolutionary. It can be a big money saver as I go through plates quite often. I wonder if this will void the warranty or implied warranty with the manufacturer for not using their plates. Thank you for sharing this being used.
@Ingrid Green I see so many people getting so excited about this mat and my thoughts are in line with your thoughts.
@Ingrid Green my husband also trimmed me one that works in my Sizzix Sidekick. They both work great
I bought them to use with my Cuttlebug and Big Kick. Thanks for showing the Cuttlebug, I'm glad it can be functional again and that I didn't get rid of it.
I like cuttlebug as well. Wish it wasn't discontinued
@@thatladynikki Yes, it's a shame they stopped supporting it when many, many people own one! For so long, Cuttlebug was the only practical choice for people on a budget.
Seems there is some contradictory info put out by scrapbook.com. I watched a video where the standard magic mat was used with the Gemini jr but I got an email that specifically said you can’t use the standard mat, you need the extended mat for the junior. Which is it?
I just received my Magic Mats (I got two) yesterday an absolutely love them!! I had been using self healing mats, but the Magic Mats work much better! I have a Big Shot Plus and use only the A adapter, not the A and B, and I get fabulous results. I have used many of my intricate dies and they all cut out perfectly. In the last 24 hours since my Magic Mats arrived, I have done SO much die cutting as I find it so much easier - all the tiny bits just fall out of the die cut. I found the old acrylic plates quite heavy for me to handle. The Magic Mats are so light and much easier and more efficient to use. THANK YOU Scrapbook.com, I LOVE my Magic Mats!! And thank you for getting them to me SO quickly! I live in New Zealand and was not expecting my mats to arrive until December!! Awesome service and awesome product!! Stay well:-)
Would you mind sharing how they are better or different than the self healing mats? Thank you!
@@debbiegordy7764 Sure! I just love these Magic mats because they cut all my dies out so easily. Even the very intricate ones. I have 2 self healing mats, but they don't give me a clean cut like the Magic mats do. I wouldn't use any other mats, having used the Magic mats. And no, I am not paid to say any of this! I just love them! Stay well and keep crafting:-)
Thank you very much Kiwi! You stay safe and happy crafting to you too! xo
@@debbiegordy7764 Thank you! I've had a bit of a rough ride lately I have M.E. and have been so very tired/fatigued. Crafting helps me relax and forget about my health for awhile:-) xx
I’m so sorry to hear that. I have chronic pain and am mostly confined to my bed too, so crafting is my therapy and happy place. I hope you find relief soon! Happy crafting to us, making good memories! 😘
WILL THIS WORK WITH THE ANNA GRIFFIN EMPRESS?
GO TO THEIR WEBSITE
I love the modifications for the Cutter bug. I still have mine. I hope you sell the mat for the cutter bug size. Great Job!
It would’ve been nice if you would have explained to the viewer what a magic mat actually is and what it does. Not all of the viewers are well versed in the paper craft world. To assume so, was your first mistake. Second, your title is a bit deceiving since you didn’t answer any specific questions.
So, what I got from watching is it works in the majority of die cutters, especially the most popular ones. Second, it does not go to the width of some of the wider ones like the Big Shot Plus. I’m guessing it’s around six inches wide, which is of no help with the bigger dies. Lastly, it is supposed to work with all of our dies in that it will be easy to poke through all of the paper bits that had been cut out.
Question, what about the other cutting plate you’ve been running through? Won’t it get all curvy as it has in the past? Would you recommend crafters to get two, therefore, not having to worry that one of them will warp and have to be replaced often. Or, are we only fixing one of the plates, not both?
I know I’m sounding snippy, I’m just upset the a lot of people just assumes everyone will know what the heck they are talking about. All of the paper crafters have started somewhere, even if it’s just for inspiration to get their creativity flowing. We have all started form somewhere and none have been proficient in their first time around.
Please, the next time a video is being made, stop for a moment and envision yourself as a beginner and what questions you would have if so. It’s all I ask.
Thank you for your time.
Be well
Hi there! We have many resources available to learn all about the Magic Mat!
You can read about it on our blog: www.scrapbook.com/mat
You can watch the first video we made about the Magic Mat: th-cam.com/video/W-HuOaMmiRU/w-d-xo.html
I am late to the magic mat. I recently bought same. I was very excited and went into a die cutting frenzy. My early cuts were great. However as I got to more intricate dies, I started having issues. I am not getting nice clean cuts as shown here. parts of the die cut fine and others not so fine. The best results seem to have come by running the cut through 4 times! What am I doing wrong?
Hi there! You can find care tips here for your Magic Mat here:www.scrapbook.com/articles/magic-mat-care-cleaning 💚
Will the magic mat work with any of the Diamond Press machines that just have folders?
To see machine compatibility, head over to the Magic Mat product pages, and under "Description & Details" you will find a list of which machines each Magic Mat is compatible with. You can also see sandwich configurations for various machines on the main product images.
aww, I was hoping for actual questions answered, or even some hacks for the Magic Mat, instead of just showing the sandwiches for every die cutting machine currently sold and if the magic mat works at one size, wouldn't all of them work as long as they fit? Showing how to use the standard and the mini pad on the extended platform is a bit superfluous.
Maybe its just me, but I was hoping for some good info on other ways to use the magic mat. How to partially die cut, or using a folded card to make the die cut go through both sides for a double see thru or shaker card. Things like that. But then again, there are many newbies in the papercrafting world the same as I was when I bought one of the first grand wizard die cutting machines from Spellbinders. Anyone else remember that machine? It was responsible for the die cutting monkey, now gorilla, on my back.
I just used my new Magic Mat. I thought "there's no resistance ,it isn't cutting" WOW , WAS I WRONG. I am ecstatic.
Can you use two mats together? One for the top and one for the bottom ?
Yes, she demoed that with the Cuttlebug
Please show the use on the Sizzix Foldaway. It seems to be an odd duck of the group. You can't even use the precision cutting plate because of higher than normal pressure.
Thank You. For showing the cuttlebug. How to use these magic mats as replacement for the plates.
I have never seen a demo with an electronic machine. I have a Big Shot Express. Would love to see a demo with that machine.
Go on You Tube for a demo of Gemini Jr. I love mine!
I have the Big Shot Express, too. I saw the part when she showed the Gemini. I assume it would work on other electronic die cutting machines too. However, you're right. I would rather like to see it done on the Big Shot Express, too.
@@gerilynne1955 Thank you for the reply but I cannot find it. Any idea who made the video?
@@lorisheardown2697 sorry no.
Did I miss it ... or did not you not show a sandwich for the Spellbinders products that are in your table display?
She is showing the magic mat on different machines. That's it. Sorry but you can always check out other You Tube videos.
Hi Erin! The sandwich for a Spellbinders machine would be, building from the bottom up: Platform, Magic Mat, Paper, Die, Standard cutting Plate 😊
@@gerilynne1955 she didn’t show it for all of the machines displayed though. Btw, no one else has videos for this item yet because it is new.
@@scrapbook thank you!
Where do you get the Cuttlebug magnetic plate????
I would try eBay. I don't do Facebook, but maybe there is a seller's group of some kind on there?
Gemini: 15:30... yw
Will the mini mat work with the sidekick
I have the sidekick and a mini mat and cannot get mine to work, I was hoping they would do a demonstration so I could see if I was doing it wrong. Hopefully someone will see your question and offer some advice
What about the Spellbinders Platinum?
Hi there! You can find machine compatibility on the individual product pages here: www.scrapbook.com/store/collection-brand/magic+mat-scrapbook+com.html 💕
Thank you for this video showing how to use the Magic Mat on Gemini Jr and my Mini Machine.
Wondering if these mats work with the AG empress machine? I have a couple of hand crank type machines that work with these mats thank you so much scrapbook.com for making our crafting life much easier and more affordable...
Thanks so much for sharing this, I appreciate your time! Stay well, blessings to you!!!
Hi! Does the magic mat work for We R Memory Keepers Revolution cutting and embossing machine?
Doesn’t work for me. Sizzix big shot plus and sizzix big shot foldaway..ok.. on the big shot plus I made the mistake of using only the AAdapter. I’ll use both of them
The magic mat is a game-changer with my Gemini Jr. Machine! Does the mini magic mat work with Sizzix Sidekick? TYFS ❤️🦋💜
What sandwich do you use for the Gemini Jr?
I have an idea. Why not make a Magnetic Mat? This would eliminate the need to tape down the metal dies as they would stick.
Hi there! Thank you for the feedback! 🥰
@@scrapbook You're welcome. I have a great mind for marketing ideas based on life events. : )
I just bought the magic mat and magnetic mat, I have a cuttlebug. Are you using these sandwiches only for thin dies? I have lots of mosaic moments dies will it work using thicker dies. What sandwich do I use for those? Thanks
Are you coming out with a larger version? Like for the Fiskars Fuse Machine?
Why would they make a product for another brand?
@@prettypaperthings The magic mat was made for different die cutting machines, but I do not see a mat for larger machines like the fiskars fuse and sizzix bigshot pro. The magic mat would come in handy for the bigger machine I have.
I have an Anna Griffin Empress machine. Does one of the plates work for this machine? If this has already been answered, please forgive me. I read a LOT of comments, and didn't find it.
What is you don’t have the magnetic plate for the cuttlebug? Will magic May still work?
Thank you you for showing me how to us it.
Does the Magic Mat work in the Spellbinders Prizm?
What about Altenew mini blossoms die cutting machine?
What if you don't have the magnetic plate for your call
Cuttlebug
Can you emboss with the magic mat Thanks
Can the magic mat be used with embossing folders?
Now I have to order another extended Magic mat.❤️♥️❤️
Can the EXTENDED Magic Mat be cut into two? I have NO need for one so long, but I'm all about saving money, so it'd be great to get 2 for 1.
Even after my regular cutting plates break in half I continue using them for hundreds of more successful cuts (using a tissue to protect the paper from becoming "embossed" by the damage.) I would like to see how a SUPER USED magic mat fares... Do they continue to cut cleanly even after lots of scarring?
Yes, they do. I flattened a warped plate by soaking it in hot water to remove the little bits of paper that were stuck in it and have used it for many more cuts since then.
What about the cut and boss, thank you, also this is slightly smaller than the big shot plus and the gemini, I know the extended plate would fit but do you plan to do one to fit the cut and boss.
Thank you x
Thank you for this demo. It would be very helpful to know what thickness/weight of paper/card you are using for this demonstration.
What size magic mat do I purchase for the Gemini big machine.
Thank you so much for sending and posting this excellent tutorial. I have a Cuttlebug, Big Shot, and a Gemini Jr. Great information. My Magic Mat is on the way and I can hardly wait to get it. I've waited a long time for it to be in stock again.
I bought this as soon as it was available. I used it right away and it absolute great. It cuts fantastic on intricate dies every time. I'll work on getting the rest of them when they are in stock.
Any tips?
Can’t make mine work with a cuddle bug sandwich or with my big shot plus sandwich. Very frustrating.
@@wendylardner2843 I'm not sure about as I don't have either one of those but I'm sure you Google it to find out
Thank you so much for the awesome demo!!
A friend gave me the standard size Magic Mat. It has changed my die cut crafting experience. I love it so much that I’m going to get the extended and mini too.
I bought this hoping it would make a difference with Tim Holtzs thinlits and still can NOT cut these things. Very disappointed.
Hi Cindy! You may find this article helpful: www.scrapbook.com/articles/mat
If you need any extra assistance you can always reach out to our Happiness Specialists via email at support@scrapbook.com ☺
I don't understand what makes the magic mat so different. You could cut everything out the old way, with a bottom plate, that you can with the mat. I only just heard abt the magic mat, and this bideo is 2 yrs old. I'm way out of touch I guess.
Hi there! The Magic Mat is specifically designed to be a replacement for your cutting plate that gets cut into by the die, so you don't have to continuously replace your cutting plates! You can learn more here: www.scrapbook.com/articles/what-is-the-magic-mat?find=magic+mat 🥰
I was wondering since this video was done before Stampin Up came out with their Cut and Emboss Machine, if anyone has actually tried the Magic Mat in it and that it didn't work and that is why it is not listed as compatible. I would like to get the Magic Mat while on sale for my SU Cut and Emboss, but won't since it is not listed. If anyone has tried these mats in the new SU Cut and Emboss Machine I would like to hear from you - thanks.
Hi there! The machines listed on the product pages have been tested by us. 😊
Where and how do I purchase this? I’m in Ontario, Canada.
Scrapbook. Com. Is where I bought mine. I'm not sure if Amazon has it yet.
Hi MaryKay! The Magic Mat is a Scrapbook.com exclusive! You can sign up to be notified when it is back in stock here: www.scrapbook.com/store/sbc-mmat-1.html
You show a Sizzix Sidekick at the beginning of the video, but I can't get the Magic Mat to work with any sandwich configuration on it. Is there another trick?
Hi Angie! To find the best sandwiches hacks and more tips we recommend this article www.scrapbook.com/articles/mat?find=magic+mat 🥰
Doesnt work for my cuttlebug😥
Have you tried the magic mat with the new Gemini 2? If so, what is the sandwich? Same as the Jr?
Yes, it works. The sandwich is Magic Mat - Paper - Thin Metal Die - Clear Plastic Shim - Magnetic Shim - White Cutting Plate
Can you use the regular Magic Matt with the big shot pro that’s what I just ordered because you didn’t have the big one yet that’s coming out in June
Hi Debra! You can view machine compatibility on the product pages:
www.scrapbook.com/store/sbc-mmat-1.html
www.scrapbook.com/store/sbc-mmat-3.html
Thank you for the review.
Ugh I want this mat! Unfortunately the standard size is STILL out of stock 😥
Thank you so much for this, I had a older model of the Cuddlebug and my B plates are shot I don't have the magnetic plate I see you using; would the standard size magic mat work as replacements for them.
Hi there Nadine! The Extended Magic Mat would need to be used for the Cuttlebug. In the video, the magnetic cutting mat was a replacement for the rubber cutting mat, so as long as you have that, you can build your sandwich like this: Platform, rubber cutting mat, Magic Mat, paper, thin metal die, B plate. 😊💗
@@scrapbook I don't have the rubber mat, do you have any recommendations.
Why would the standard magic mat not measure 6" wide so it can be used in the cuddlebug?
A lot of people are just cutting up their sewing cutting mats to use in their cutting machines. Maybe you could make one for yours?
What if you don’t have the magnetic mat?
How about the big shot switch machine?
The bottom plate works just like that so what is the difference?
It's actually quite a noticeable difference. A couple of benefits are my excess paper isn't picking up any lines from my scarred cutting plates, which kind of ruins any uncut paper. The other difference is the deeper curve on the edges, giving a little more dimension, and polished look to the finished die cuts. It also feels easier and smoother to crank.
For the Gemini I have found using the magic mat sandwiched between 2 Sizzix plates is the perfect sandwich. You place them into Gemini sideways. The Sizzix plates are a bit thinner and allows use of magic mat.
With an intricate die I sometimes use one Gemini JR plate a one standard Sizzix plate with the magic mat in the middle
@@lcbiermannhg4h with the two Sizzix plates does your Magic Mat warp with just a few cuts? I can straighten mine out with the heat gun, but I don't want to do that every 3 cuts. I am using the two clear Gemini plates and the magic mat.
@@rachelrussell8538 the Gemini plates are a bit thicker so your sandwich is too tight. Try to replace one Gemini plate with a Sizzix plate. When the sandwich is too tight the mat warps.
@@rachelrussell8538 my mom has a Junior and she used 2 Sizzix plates and her magnetic shim with the magic mat. So you have to see what works for your machine. Less is more! Occasionally I have to use heat gun but not much
@@lcbiermannhg4h I bet you are exactly right. I wasn't sure about the thickness of the Sizzix plates and didn't want to order them since I don't have a Big Shot. In my original size Gemini, I can't use their recommended sandwich just for cutting. I am going to order a pair and try them out! My magic mat after 5-10 cuts looks like an S. I am so grateful for your comment. Thanks for you reply and suggestion!
I thought it was also magnetic. I am disappointed that the magnetic plate and the self healing mat are not combined?
Thank you for your feedback, Laurie 😊
I have the Sizzix Bk and I have the standard and extended magic mat I tried sever times and it won’t cut out my dies. I did the sandwich just as suggested several times it doesn’t cut. Do you have a suggestion?
I ABSOLUTELY LOVE MY STANDARD ONE! WHEN WILL THE EXTENDED BE BACK IN STOCK? ❤
Yay! We are so happy to hear that, Traci! You can sign up to be notified via email (and text message!) when the Extended Magic Mat is back in stock! 💗
@@scrapbook Yes, I did sign up. Do you think they will be back before Christmas?
Which magic mat size goes in the Sizzix Switch Plus machines?
You can find machine compatibility for your machine here: www.scrapbook.com/articles/assets/files/4331/MagicMat-Approved%20Machines.jpg 💗
Is there a manufactorie in the Netherlands who sells these mats.
No, the Magic Mat is a exclusive to Scrapbook.com.
How often do you have to heat the mat when you use it with the Gemini Junior due to warping? Thank you.
My guess would be when needed.
It looks like you are only using thin paper how does card stock cut even heavy cardstock
I noticed this too.
I could have made my own. But this sure did save me the time of cutting them out. I'm very happy that they finally realized we wanted and needed this. Now get hopping! I need the regular size mat. You were sold out in one day!😠 which goes to show you, it was needed and wanted.