You helped so much! Thank you, my carpet cleaner is working much, much better. The one thing I did notice, the red filter turn nob on the stationary part of the cleaner, underneath the tank, that was turned to unlock. So, I went through everything you said and cleaned out the liter read filter in the tank, turned the big red button to lock, and voila! Working like it should. You a fabulous trainer! Thank you again!
I want to thank you Wayne for explaining the filter (small red box) fixture inside the tank! The door is now OPEN and we have suction😅. The pro heat 2x pet machine my boyfriend purchased from my landlord was almost brand new. It is in pristine condition, but my landlord no longer uses the machine. My boyfriend had a great news as his rental house needed a good cleaning. We were perplexed when the ma nine first started working and then quit suctioning! Talk about frustration! We started researching TH-cam and your helpful video tremendously helped! THANK YOU! MANY BLESSINGS to you!
Thank you so much for creating this troubleshooting video! It helped me fix the suction problem on my Bissell 2x. The filters needed cleaning! Take care!
Thankyou sir! I had not even seen that filter on that flap! Mine looked like it had a pad over the mesh…it was totally packed. I cleaned that and it now is as good as new. Thank you very much for the video!!
I had looked through the manual, went to the Bissell support page, went through the forums… I couldn’t quite figure out what they were referring to. Your video was so helpful! You had some really great tips in addition to fixing my problem as well. I drew a line on my tank lol Thanks for this video, it saved my sanity!
OMG!!!! Thank you! Thank you! Thank you!!!! I almost went out and bought a new Bissell. I am generally not to bad with fixing my own stuff if I run into a problem. I had the first unit that you were demonstrating and I knew about the filter in the water container getting clogged but I did not realize it was also the the pro2x because it is somewhat hidden compared to the other unit. Well that did the trick. Now going back to suck up 4 ci=ontainers of water that did not get sucked up! Thank you again so much!!!! I am definitely a subscriber now!!!
Thank you thank you thank you! My husband was ready to throw this out because it was not suctioning. Your video showed him he didn't have the front clipped properly and the seal was not tight. Quick and easy fix. Again, thank you thank you thank you!!!
I'm tellin ya Wayne you make good videos...Thanks ... love the way you express yourself... I can tell you are a very likeable person ...Hell I don't even know you and I like you.
Thanks for the suggestions to both test the suction right at the source and remove the check valve. I've now eliminated those as the potential problem. Onward in my diagnosis!
Thank you Thank you! I have the powerlifter powerbrush, i thought i was gonna have to put it in the shop, followed your tips and yes all it was, was the filter. thank you again.
Thank you for the video. My pro Heat 2x tank was cracked. I never considered that as a possibility until I saw this video. Also I did not know that hot water could damage the tank over time.
You were more helpful that the customer service rep for Bissell!! I’m still having the suction issue with my Pro heat Select 2x; however you have put me on the best path to identifying the problem. Thank you!
Good video.I cleaned all the fuzz,lint,etc.thoroughly to no avail.I DID NOT however,check to make sure the tanks were REALLY seated, & seal leaks.Thanx.
Is there anyway to disassemble the head to actually clean where the water goes up the face? there are 2 screws and a clip on the bottom but I’m afraid to pry on it lol
Excellent video thank you very much! I used the troubleshooting suggestions and partly resolved my problem. After cleaning the little filter (close to the float) in the collection tank I thought it would resolve the second part of my problem... which is no suction at the floor piece. When I move the selector dial to the hand attachment - suction is strong suction. When I switch back to floor I am getting no suction from the floor piece. I tested the selector dial to make sure it was working (making sure it was diverting correctly) and it does work as expected. Gaskets between collector and floor seems good - I did the tissue test you suggested and didn't get any results for a leak. Simply = when its on the floor setting I have no suction - any suggestions on what else to check?
Update since I posted - hairline crack right along vertical side of the floor nozzle. Because I was testing at the bottom where you would expect suction I didn't notice the crack immediately. Going to replace the part and check again!
Hi Wayne… I’m having another issue with my Bissell Pro Heat 2x. No suction on floor mode. I did check the black square and theres plenty of suction. I also remove the red lint saver. Still nothing. I did open the piece where the water jets are bc I was not getting any water. Not sure if its possible that I disconnected a hose bc the top suction is great So I thought I would ask for help again before the shampooer meets the curb Thank You Donna. .
Can you tell me how to clean dirt out where the knob is to turn from floor to tool on a bissell pro heat 2x max . It’s a little older model . I can’t get to that area to clean it
Thanks for the help Which pro heat 2x pet pro is the best one to buy. I am getting ready to buy.The one with the spray for stain s or with out spray. Thank you. God Bless. Please let me know ASAP.
This is a very helpful video.In my orange pet revolution there is a gasket in nozzle and similar oval gasket below .The gasket which was below came out .Can you tell me how to fix that without opening the whole part?
Hi. I bought a second hand Bissell ready clean. I used it today for the first time. The dirty water tank did not fill up and the carpet was soaking wet after cleaning it
I took my bissel pro heat apart after lending it to some one, it was really nasty, I took it all apart when I took the side plastic pieces off the brushes came out which was nice cause I cleaned all around and under them but putting it back together I’m not sure where to put the belt drive? It has two brushes. On one side the belt just goes around the two brushes but not sure how to reassemble the other side?
I am having trouble with my Bissell Pro Heat Pet with sucking up water. It starts working then the sound changes and it stops sucking it up unless I turn machine off for few min then starts working. I have do this a lot.
Great tips, But I had another question about the same unit the pro heat/ pet. It leaks out of the bottom when using and while setting? Running or not it leaks. It is an older unit just wondering if it would be a easy fix or get a new one.
Its most likely the autoloader receiver...the black circle that sit below the tank.. part number 2036758...sounds like the bottom seal broke and causing the water to leak out
Hi I have a brissel pro heat 2x pet pro I have no suction from the front end... Tested hose...hose works...have suction from the motor...filter is clear amd as lint free as i can get it...ive narrowed it down to between the floor and brissels to the tirn knob "floor / tool" selector...nothing Any ideas? Im stumped
You may have to remove the nozzle and check to see if you have suction at the bin window. If so then replace the nozzle. If not then the bin assembly is the problem.
I'm still having issues with my bissel proheat 2x I've cleaned and checked everything in your video but it still has no suction, the tool option works still wonderfully but the floor cleaner option still doesn't work
If the motor has suction the the next step is the tank. Try taking the nozzle off. Remove the screw that hold the main nozzle to the base and remove the nozzle. Then put the tank back on the unit. Turn the machine on to check if the suction is reaching the section where the nozzle should connect. Use a paper or plastic to test suction. If good suction then the problem is the nozzle if not then look to the tank. Keep me posted
Hey thanks for these videos much appreciated! My brand new bissel “turbo clean powerbrushPet” shampooer, which I have only used for about a half an hour, starting to give a high pitch squeal and then I could smell smoke/burning smell coming from the unit. Very strange that a brand new unit would possibly burn the brushes(motor brushes not vacuum brushes) so quickly and cause it to squeal and burn up. The unit works but I can feel if I push it much more I’m going to fry it completely... any thoughts sir? Many thanks, -Bobby
Hi Robert, sound like a motor/electrical issue. I recommend calling bissell. They will first troubleshoot over the phone, then recommend a local authorized shop. If none is in your area then they will work something out with you. Possibly send out a replacement,.that is if its still under warranty. Hope thats helps
Hmmm.. I have a playlist Bissell tips. That focus on suction through the hose please visit that playlist to see if one of those videos can help. If not let me know
Please help we have a ProHeat 2X revolution deep cleanser that worked perfectly the first time And now the dirty water is not suck back into the the dirty water Is it possible that the hose may be clogged? If so how do I remove it to clean it out or do I remove it? Please help 🆘
Hello Auntie Donna, I made a video that may help. watch this first and if it doesn't solve the problem, let me know and we'll explore further. th-cam.com/video/Cr0NqDf_Y1o/w-d-xo.html
Get a screw driver and remove the clear plastic nozzles from the front and side of the unit. Specifically the front and left side( the left if you are standing behind the Shampooer) your belt may be broken
I have a brand new Revolution Pet Pro . It sprays, but does very little pick up, if any at all! And when done the machine leaked all over my floor...so, any hints how I might trouble shoot this? Thank you!:) But going to go back and check it all through with gaskets etc.
@@monroevac Hey that was sure fast!! And thank you! I just can't go and buy a new unit, so, thank you for putting up such great videos! Helps those of us who like to fix our own stuff! Anyway, I will check this out. I do have an idea I want to try on the leaking top canister...can one lubricate it with some silicone grease so the rubber part might seal better? Sometimes plastic/rubber gets too dry...so I am thinking of trying to lubricate it to help it to seal. Spending 100 + for a canister that might not work, again, is not a great option! Thanks for your fast reply!!:) Cheers Bro!
Mine isn't suctioning up, but blows air underneath. It has suction and followed all steps mentioned and still isn't suctioning up water. Should air be blowing out of the bottom of the machine???
Shampooer and vacuums all has exhaust. So expect some air to be blown out of the unit. Use my contact page on my website and send me a video. Without seeing it in action it’s hard to properly diagnose the problem
I know I am a little late on this video but I just want to say, Awesome Video! I did everything you said here and I cleaned everything out and even used an air duster on the bottom of the Bissell Pro Heat 2x (Model 9200) and when I turn it on without the tank the suction is VERY STRONG and the hose works fine but when I turn the dial to "Floor Cleaning" it has some suction on the bottom so I am thinking it's probably the trigger on the handle. Do you think I should open up the top part of the vacuum to check the trigger part? Please any info you can give me I will appreciate and I am in no rush.
If the problem is suction you won’t need to focus on the trigger. The tank, the lid and the window nozzle is where your focus should be. Check those for either leakage or clog
Thanks so much for your videos. I have a Bissell 66e12 carpet cleaner. The base suction is fine but there is no suction from the tools hose. Bissell sent me instructions that simple said to take it to an authorized dealer. I am a very handy DYI guy. Cab you give us a tutorial on this issue?
Hello Mr. Monroe; I have a Bissell 253A Series and recently I have a problem. When I was cleaning my bedroom carpet I have noticed the dirty water isn't sucking into the blader-container. Can you please help or answer my question how to fix the problem? Thanks Armine
Sorry for delayed response-Model 25A3 - diagnostic can start at the motor. Take off the tank turn on the unit and check the suction at the opening . Then check your tank for crack or the lid to make sure it closes properly. Next put the tank on but remove the front nozzle window and check the opening that joins / connects to the window. If all those check out and has suction that the next step is a put the window back and check to see if it will suck up water, if not replace the window. How that helps
In the bissell proheat pet how is the spinner supposed to work??? Also is the brush roll supposed to wiggle all over or be stationary??? Great video I'm having suction problems so I'm off to start troubleshooting... I'm putting water down picking some up but not as much as I'm putting down and my spinner isnt moving... I also cant tell if my brush is moving but I'm going to try to check and see... it's been a while a long while since I've used the machine... great video I really appreciate it...
Ah man, how sneaky of these companies to keep using the same name to a vacuum that looks totally different. Looking for the Bissell Deep Clean Pro Heat 2X professional pet similar issue loss of suction. It was just working and then nothing, I checked the basics and don't see any debris or flap issues but am having issues identifying the suction flow from under the tank, I feel a pull of air only under the small red screen but not really anywhere else, there is some air/heat blowing out up closer to the roller bars (heat dry feature maybe) Do you happen to have this unit by you to help walk me thru this or maybe already have a video with it? Thanks in advance : )
Are you referring to the section where you change from floor to tool? If so it is not made to open. Doing so will risk breaking it. Not saying it isn't possible but if you try be careful.
I had finished washing my floor, the bucket was filled with dirty water, then I tripped the bucket with the mop spilling all the water so I started sucking it with my bissell 7209 but I kind of "drowned it" then the power went off. after I emptied the water from container, tried to started again & it's dead. Is my machine reparable or it's a gonner? 😟 Thank you for any advice.
THIS ,.... Sir , is the MOST Professional, common sense video I've watched yet.
Thank you 👍👍👍👍.
You’re welcome 👍
Thanks a million i was able to get suction by cleaning the red thing 🎉
It's so refreshing to watch a video that's actually helpful and informative, thank you for making this!!
Thanks Mikestorck, my pleasure
You helped so much! Thank you, my carpet cleaner is working much, much better. The one thing I did notice, the red filter turn nob on the stationary part of the cleaner, underneath the tank, that was turned to unlock. So, I went through everything you said and cleaned out the liter read filter in the tank, turned the big red button to lock, and voila! Working like it should. You a fabulous trainer! Thank you again!
I want to thank you Wayne for explaining the filter (small red box) fixture inside the tank! The door is now OPEN and we have suction😅. The pro heat 2x pet machine my boyfriend purchased from my landlord was almost brand new. It is in pristine condition, but my landlord no longer uses the machine. My boyfriend had a great news as his rental house needed a good cleaning. We were perplexed when the ma nine first started working and then quit suctioning! Talk about frustration! We started researching TH-cam and your helpful video tremendously helped! THANK YOU! MANY BLESSINGS to you!
Sorry for the typos! My boyfriend had a GREAT NEED for this machine.
I watched several videos.
You are the only one who actually explained how it works. Thank You.
Im glad I was able tto help Roxann. Thanks for tuning in.
Thank you! Very clear instructed video that helped me fix my bissell proheat 2x thats been sitting for 2 years that I finally got out to use.
Good to hear..enjoy the holiday
Thank you for sharing your knowledge and explaining everything so well. You're a great teacher. 😊
You're welcome and Thank you!
Brilliant. I was about to go to the repair store but watched your video first. I simply had to clean the little red filter. Thank you so much 💓
Glad it worked out. Thanks for watching
Thank you so much for creating this troubleshooting video! It helped me fix the suction problem on my Bissell 2x. The filters needed cleaning! Take care!
Glad it helped!
Thankyou sir! I had not even seen that filter on that flap! Mine looked like it had a pad over the mesh…it was totally packed. I cleaned that and it now is as good as new. Thank you very much for the video!!
Thanks for watching my video Mark, I’m glad it helped you. 😀 Don’t forget to subscribe for more tips
I was able to fix my Bissell Proheat 2x after watching this video. Thank you so much ! You saved me money !
Always good to save that money. Glad it helped
Thank you for showing how to fix these issues. It was a big help and my machine is running great again!
You're welcome. Please..stay tuned for more tips
THANK YOU SO MUCH!!! Cleaned my filter.... looked like a dryer lint trap. Machine runs perfectly now, thanks again!
Great.. Glad it helped
I had looked through the manual, went to the Bissell support page, went through the forums… I couldn’t quite figure out what they were referring to.
Your video was so helpful! You had some really great tips in addition to fixing my problem as well. I drew a line on my tank lol
Thanks for this video, it saved my sanity!
Awesome 😎!!! Glad to help
OMG!!!! Thank you! Thank you! Thank you!!!! I almost went out and bought a new Bissell. I am generally not to bad with fixing my own stuff if I run into a problem. I had the first unit that you were demonstrating and I knew about the filter in the water container getting clogged but I did not realize it was also the the pro2x because it is somewhat hidden compared to the other unit. Well that did the trick. Now going back to suck up 4 ci=ontainers of water that did not get sucked up! Thank you again so much!!!! I am definitely a subscriber now!!!
Awesome I’m glad it helped. Thanks for subscribing 👍🏽🔥
Thank you, thank you.....it was that red filter--I was ready to take the machine apart, so simple, you're wonderful!
You’re welcome Gwen. I love wonderful, I’ll take that all day 😀
Thank you…this video helped me tremendously as that red float door came off and I had no idea how to put it back on!
Glad it helped!
Thank you thank you thank you! My husband was ready to throw this out because it was not suctioning. Your video showed him he didn't have the front clipped properly and the seal was not tight. Quick and easy fix. Again, thank you thank you thank you!!!
You are welcome 🙏
I'm tellin ya Wayne you make good videos...Thanks ...
love the way you express yourself...
I can tell you are a very likeable person ...Hell I don't even know you and I like you.
Thanks Albert. That means a lot!!!
Thank you, thank you, thank you! You saved the day, alright. I didn't have the foot sealed properly. I am so grateful for your help.
My pleasure Thanks for supporting the channel
Brilliant followed your advice and sorted the problem out saved hours in trying to work through myself thank you…
You are welcome
I had the problem of no suction, after watching your video it sucks like a champ lol. Your video solved my problem. Thanks for the video.
You are welcome Roy
Really enjoyed watching your presentation! now hopefully it will help my suction problem...
🙂hopefully. Keep me posted
Fixed in less than 5 minutes! You're awesome! I was dreading purchasing a new one!!!
Glad I could help!
Thanks for the suggestions to both test the suction right at the source and remove the check valve. I've now eliminated those as the potential problem. Onward in my diagnosis!
Great job let me know how it works out
Thank you for the help! Didn't realize that small little filter played a huge part ! Thanks again!
No problem! Thanks for tuning in.
@@monroevac I cleaned my filter and it still steuggled to suck anything up :*
Dude you are the Maestro of our industry. Keep up the great work. Johnny Vac of NY.
Nuff Respect John! Thanks
Awesome job on this video very easy to follow thank you .❤
Oh yeah! Glad to help
Thank you Thank you! I have the powerlifter powerbrush, i thought i was gonna have to put it in the shop, followed your tips and yes all it was, was the filter. thank you again.
Glad I was able to help
Please subscribe, I can use the channel support. Thanks
Thanks Bro simple and make since work for no suction issues , still a lot of lint balls I just can’t get these sucked up✌🏾
The only thing that worked for me was to vacuum. Vacuum longer than usual to remove a much loose fibers and dirt as possible, and then shampoo.
Thank you! This helped me fix my Bissell! Nice clear troubleshooting guide!
I’m glad it helped and thank you
Thank you for the video. My pro Heat 2x tank was cracked. I never considered that as a possibility until I saw this video. Also I did not know that hot water could damage the tank over time.
You’re welcome
Awesome tips!! Cleaned all the filters. Definitely needed cleaning.
Excellent
You were more helpful that the customer service rep for Bissell!!
I’m still having the suction issue with my Pro heat Select 2x; however you have put me on the best path to identifying the problem.
Thank you!
Glad to help
thank you for explaining all that. I was at a loss now I know.
Thank you for posting this. I have had this issue for sometime and its down to that little flap just closing for no reason.
Glad it worked out
Thanks for all of your help you are amazing
Thanks for tuning in
Thank you! I found the issue with my Bissel and fixed it!
You're Welcome-glad to help...dont forget to subscribe..ill try to keep more tips coming
Good video.I cleaned all the fuzz,lint,etc.thoroughly to no avail.I DID NOT however,check to make sure the tanks were REALLY seated, & seal leaks.Thanx.
Great job… glad it worked out
Great video - very much good troubleshooting info - thx!
You’re welcome
Very helpful! Thank you so much!
Thank you so much for this video! It was a life saver!
Glad is was able to help.
You’re the best. I fixed the suction In minutes
Thanks
Very helpful. Thanks!
Amazing video....loved it
I FIXED MY VACUUM WITH THIS VIDEO!
Awesome!!!!
Thank yu kind sir, very helpful indeed!
You’re welcome
Thanks, didn't know about the filter...it works
Welcome
Thank you so much it was full on suction
You are welcome 😊
Great video, thanks.
Your welcome
thank you so much for the insight
You’re welcome
you are so good thank you MR fixing ,i fix mine now hahaha im so happy thank you
So well explained.. Thank you..
You are welcome 😊
Thanks for the video helped with a headache I had lol
Yes I’ve had many 😊so I’m happy to help
Thanks, dude! You're the real MVP!!!
Thanks 🙏
Thank you!!! 😊
Good video!! 👏🏻👏🏻✊🏻
You’re welcome, I’m happy to have helped!
Thanks Wayne for sharing your expertise. Can't wait to see if it fixes my Bissell Carpet Shampooer (Uhhh that sounds funny LOL)
😊 you’re welcome
I have a pro beat 5..ive checked the su tion and all..what else can i do
GENIUS AND THANK YOU MY FRIEND
You're welcome!
You're the man!!
This helped a lot thank you?
Glad it helped. 🙂
Thank you. My ProHeat 2X flap keeps closing. I will take it off. I've cleaned e everything there is to clean and it still closes.
Good video👍
Thanks 👍
I’m assuming if you have weak suction right at the source that your motor is on its way out? Just trying to get mine sorted. Many thanks
Is there anyway to disassemble the head to actually clean where the water goes up the face? there are 2 screws and a clip on the bottom but I’m afraid to pry on it lol
Wow I tore the entire vacuum apart only to realize the filter in the water tank was clogged with carpet fibers 🙄😂
Been there😊
You the man!
Thank you!!!
Thank you much
Excellent video thank you very much! I used the troubleshooting suggestions and partly resolved my problem. After cleaning the little filter (close to the float) in the collection tank I thought it would resolve the second part of my problem... which is no suction at the floor piece. When I move the selector dial to the hand attachment - suction is strong suction. When I switch back to floor I am getting no suction from the floor piece. I tested the selector dial to make sure it was working (making sure it was diverting correctly) and it does work as expected. Gaskets between collector and floor seems good - I did the tissue test you suggested and didn't get any results for a leak. Simply = when its on the floor setting I have no suction - any suggestions on what else to check?
Update since I posted - hairline crack right along vertical side of the floor nozzle. Because I was testing at the bottom where you would expect suction I didn't notice the crack immediately. Going to replace the part and check again!
Awesome glad you made progress...
Hi Wayne…
I’m having another issue with my Bissell Pro Heat 2x.
No suction on floor mode.
I did check the black square and theres plenty of suction. I also remove the red lint saver. Still nothing.
I did open the piece where the water jets are bc I was not getting any water. Not sure if its possible that I disconnected a hose bc the top suction is great
So I thought I would ask for help again before the shampooer meets the curb
Thank You
Donna. .
Awesome 😎
Can you tell me how to clean dirt out where the knob is to turn from floor to tool on a bissell pro heat 2x max . It’s a little older model . I can’t get to that area to clean it
That’s a tough one. I’ve tried long plastic zip ties. It’s an odd spot. I’ll have to look into it more
Thanks for the help Which pro heat 2x pet pro is the best one to buy. I am getting ready to buy.The one with the spray for stain s or with out spray. Thank you. God Bless. Please let me know ASAP.
Sorry for delay just saw the message...either one. The spot option is good. You can go with that if the deal is good
This is a very helpful video.In my orange pet revolution there is a gasket in nozzle and similar oval gasket below .The gasket which was below came out .Can you tell me how to fix that without opening the whole part?
I’ll be at my shop later today. I’ll take a look and let you know
Hi. I bought a second hand Bissell ready clean. I used it today for the first time. The dirty water tank did not fill up and the carpet was soaking wet after cleaning it
Check your seals and nozzle window. Also take the dirty water tank off and check the suction at the base
I took my bissel pro heat apart after lending it to some one, it was really nasty, I took it all apart when I took the side plastic pieces off the brushes came out which was nice cause I cleaned all around and under them but putting it back together I’m not sure where to put the belt drive? It has two brushes. On one side the belt just goes around the two brushes but not sure how to reassemble the other side?
The brosh motor side - the small belt goes from motor gear to first brush -the one closest to the motor
I am having trouble with my Bissell Pro Heat Pet with sucking up water. It starts working then the sound changes and it stops sucking it up unless I turn machine off for few min then starts working. I have do this a lot.
Hi Kimberly, Just to verify is this model a pro heat pet 2x or a Revolution or just a regular aPro heat? The possible fix is different for each
How can I order a new red flap cover for that filter that keeps water out of the motor in this video?
a slight delay on shipping but you can order at square.link/u/vHCaRCLU
Great tips, But I had another question about the same unit the pro heat/ pet. It leaks out of the bottom when using and while setting? Running or not it leaks. It is an older unit just wondering if it would be a easy fix or get a new one.
Its most likely the autoloader receiver...the black circle that sit below the tank.. part number 2036758...sounds like the bottom seal broke and causing the water to leak out
@@monroevac Thanks for the fast response I'll check it out.
Hi
I have a brissel pro heat 2x pet pro
I have no suction from the front end...
Tested hose...hose works...have suction from the motor...filter is clear amd as lint free as i can get it...ive narrowed it down to between the floor and brissels to the tirn knob "floor / tool" selector...nothing
Any ideas? Im stumped
You may have to remove the nozzle and check to see if you have suction at the bin window. If so then replace the nozzle. If not then the bin assembly is the problem.
I'm still having issues with my bissel proheat 2x
I've cleaned and checked everything in your video but it still has no suction, the tool option works still wonderfully but the floor cleaner option still doesn't work
If the motor has suction the the next step is the tank. Try taking the nozzle off. Remove the screw that hold the main nozzle to the base and remove the nozzle. Then put the tank back on the unit. Turn the machine on to check if the suction is reaching the section where the nozzle should connect. Use a paper or plastic to test suction. If good suction then the problem is the nozzle if not then look to the tank. Keep me posted
When I plug my Bissell pro heat plus in to the outlet and turned it on A lot of smoke comes out of it what causes that problem
If I had to guess without seeing it for myself…it’s a Motor problem. Either replace motor or replace the unit.
Hey thanks for these videos much appreciated! My brand new bissel “turbo clean powerbrushPet” shampooer, which I have only used for about a half an hour, starting to give a high pitch squeal and then I could smell smoke/burning smell coming from the unit. Very strange that a brand new unit would possibly burn the brushes(motor brushes not vacuum brushes) so quickly and cause it to squeal and burn up. The unit works but I can feel if I push it much more I’m going to fry it completely... any thoughts sir?
Many thanks,
-Bobby
Hi Robert, sound like a motor/electrical issue. I recommend calling bissell. They will first troubleshoot over the phone, then recommend a local authorized shop. If none is in your area then they will work something out with you. Possibly send out a replacement,.that is if its still under warranty. Hope thats helps
@@monroevac thank you for the reply sir, yes they are sending a new one. 🙏🏼
Awesome..Bissell probably has one of the best factory warranty in this industry..glad it worked out
I don’t have suction through the hose. How would you go about fixing that?
Hmmm.. I have a playlist Bissell tips. That focus on suction through the hose please visit that playlist to see if one of those videos can help. If not let me know
Please help we have a ProHeat 2X revolution deep cleanser that worked perfectly the first time
And now the dirty water is not suck back into the the dirty water
Is it possible that the hose may be clogged?
If so how do I remove it to clean it out or do I remove it?
Please help 🆘
Hello Auntie Donna, I made a video that may help. watch this first and if it doesn't solve the problem, let me know and we'll explore further. th-cam.com/video/Cr0NqDf_Y1o/w-d-xo.html
Good day I recently came across your videos, brushes not spinning Bissell proheat 2x select.. and I’m in the middle of shampooing 😩please hellllllp!
Get a screw driver and remove the clear plastic nozzles from the front and side of the unit. Specifically the front and left side( the left if you are standing behind the Shampooer) your belt may be broken
I have a brand new Revolution Pet Pro . It sprays, but does very little pick up, if any at all! And when done the machine leaked all over my floor...so, any hints how I might trouble shoot this? Thank you!:) But going to go back and check it all through with gaskets etc.
Hi I have a playlist with a video that should help. Covers suction problems with Bissell Revolution . See Bissell tips playlist
@@monroevac Hey that was sure fast!! And thank you! I just can't go and buy a new unit, so, thank you for putting up such great videos! Helps those of us who like to fix our own stuff! Anyway, I will check this out. I do have an idea I want to try on the leaking top canister...can one lubricate it with some silicone grease so the rubber part might seal better? Sometimes plastic/rubber gets too dry...so I am thinking of trying to lubricate it to help it to seal. Spending 100 + for a canister that might not work, again, is not a great option! Thanks for your fast reply!!:) Cheers Bro!
Mine isn't suctioning up, but blows air underneath. It has suction and followed all steps mentioned and still isn't suctioning up water. Should air be blowing out of the bottom of the machine???
Shampooer and vacuums all has exhaust. So expect some air to be blown out of the unit. Use my contact page on my website and send me a video. Without seeing it in action it’s hard to properly diagnose the problem
I know I am a little late on this video but I just want to say, Awesome Video! I did everything you said here and I cleaned everything out and even used an air duster on the bottom of the Bissell Pro Heat 2x (Model 9200) and when I turn it on without the tank the suction is VERY STRONG and the hose works fine but when I turn the dial to "Floor Cleaning" it has some suction on the bottom so I am thinking it's probably the trigger on the handle. Do you think I should open up the top part of the vacuum to check the trigger part? Please any info you can give me I will appreciate and I am in no rush.
If the problem is suction you won’t need to focus on the trigger. The tank, the lid and the window nozzle is where your focus should be. Check those for either leakage or clog
@@monroevac Thank you so much! I will look into it as soon as possible
Thanks so much for your videos. I have a Bissell 66e12 carpet cleaner. The base suction is fine but there is no suction from the tools hose. Bissell sent me instructions that simple said to take it to an authorized dealer. I am a very handy DYI guy. Cab you give us a tutorial on this issue?
I'll start on that. Thanks for sharing
will be uploading a video today on that topic. Look for it.
Hello Mr. Monroe; I have a Bissell 253A Series and recently I have a problem. When I was cleaning my bedroom carpet I have noticed the dirty water isn't sucking into the blader-container. Can you please help or answer my question how to fix the problem? Thanks Armine
Sorry for delayed response-Model 25A3 - diagnostic can start at the motor. Take off the tank turn on the unit and check the suction at the opening . Then check your tank for crack or the lid to make sure it closes properly. Next put the tank on but remove the front nozzle window and check the opening that joins / connects to the window. If all those check out and has suction that the next step is a put the window back and check to see if it will suck up water, if not replace the window. How that helps
The one that you have on the table I have and is not putting out cleaner or water. How do I fix it?
I have a video on the channel addressing that issue. If it doesn't help you with your issue. Contact me again and I'll try to make one more specific
Great day! I have a proheat pet turbo. Just got it out the box & theres no power. WHAT CAN I DO 😩😩
I wouldn’t touch it. Call Bissell and utilize the warranty. They’ll either forward you to the nearest warranty center or send you a replacement
I'm in South Carolina
You're cool man
I try....😊 thanks
In the bissell proheat pet how is the spinner supposed to work??? Also is the brush roll supposed to wiggle all over or be stationary??? Great video I'm having suction problems so I'm off to start troubleshooting... I'm putting water down picking some up but not as much as I'm putting down and my spinner isnt moving... I also cant tell if my brush is moving but I'm going to try to check and see... it's been a while a long while since I've used the machine... great video I really appreciate it...
Keep me posted you’re off to a good start
Ah man, how sneaky of these companies to keep using the same name to a vacuum that looks totally different. Looking for the Bissell Deep Clean Pro Heat 2X professional pet similar issue loss of suction. It was just working and then nothing, I checked the basics and don't see any debris or flap issues but am having issues identifying the suction flow from under the tank, I feel a pull of air only under the small red screen but not really anywhere else, there is some air/heat blowing out up closer to the roller bars (heat dry feature maybe) Do you happen to have this unit by you to help walk me thru this or maybe already have a video with it? Thanks in advance : )
Don’t have one near me at this moment, but if you look through my Bissell tips playlist you may find the answer
How do you open the transparant plastic on the top?, thank yoi
On powerstreamer one?
Are you referring to the section where you change from floor to tool? If so it is not made to open. Doing so will risk breaking it. Not saying it isn't possible but if you try be careful.
I had finished washing my floor, the bucket was filled with dirty water, then I tripped the bucket with the mop spilling all the water so I started sucking it with my bissell 7209 but I kind of "drowned it" then the power went off. after I emptied the water from container, tried to started again & it's dead. Is my machine reparable or it's a gonner? 😟 Thank you for any advice.
You may need a new motor, but yes it’s repairable
@@monroevac Thank you very much for your advice.
Myrtle Beach here
Hey Myrtle Beach 🏖