How do you get the origin of the parts that are modeled inside an assembly to be in the normal position? When you model new parts inside an assembly the origin is way off from center of the part.
hello aryan how are you ? i have a question for you out of topic why they are using coding on solidworks are there any easier or something method hope you can answer thanks
please master,.give me how solustion,..when i try to assembly 2 part and insert that file,but the one of file look not same wehen i sketching before,and i can't to do mate 2 a part because different scale / dimention TQ.
How to create a sweep boss. In assembly. Because I had three different sub assemblies. Which combines make one assembly.. Now I have to create a sweep boss (with spline and circle at bottom of spline starting) in assembly, it should pass-through my three different parts. And I don't know how to do that.. So can guide me please?
@@with-Aryan it's like I can't create spline (in 2d)which passes through my three areas of assembly and they are at on different planes..here I have to use 3d sketch for that I think?
@@shubhampatidar5982 not necessarily. You could create a 2D spline that does NOT go through all your component FIRST, then after your part is ready, MOVE IT, place it in a way that it DOES go through all your components, then FIX it there using MATES
I’d love your teaching method. However with all due respect I understand that speaking a different language comes with its downfalls if I may, let me say that your ability to speak English is hindered by your accent, that’s rendering your speech incomprehensibleIn certain areas. Please slow your speech down to 75% of what you normally do and pronounce your words more precisely. Thank you so much
I think you are the one that has trouble with comprehension... He talks slowly as it is already. I watch his videos at 1,5 - 2x speed and I can understand everything just fine
Watch my 1-Hour free webinar if you are a beginner here >> pages.solidworkstutorials.net/comments
Nicely done! Keep them coming!
Ryan, thank you for this! 🙂 👍
Awesome and amazing video Sir. I love it
So nice of you
Excellent as always! Thanks
Thanks again!
You are GOOOOD!!!!
Thank you!!
Modifying the component within the assembly model is an "invitation" to crash especially for large complex files.
Just do it in a separate window.
Not at all
It's Bottom up assembly aproach
It is helpful to design press tool, plastic mold etc.
Even I use this method to design fixture
Thank you, I really learned a lot from you. healthy and success always for my idol Aryan.
thank you!
Nice Video!
that was so useful thx for you effort 🥰
You’re welcome 😊
thank you
You're welcome
Thanks y
Welcome
How do you get the origin of the parts that are modeled inside an assembly to be in the normal position? When you model new parts inside an assembly the origin is way off from center of the part.
first, you go to the VIEW tab and activate ORIGINS. From there on, you'll see the origin.
TNX VEER
you're welcome!
hello aryan how are you ?
i have a question for you out of topic
why they are using coding on solidworks
are there any easier or something method
hope you can answer
thanks
if you mean equations, then they are very handy in a variety of situations.
@@with-Aryan
no not equations
İ mean coding example
Vba macro thing is this better then normal drawing ?
please master,.give me how solustion,..when i try to assembly 2 part and insert that file,but the one of file look not same wehen i sketching before,and i can't to do mate 2 a part because different scale / dimention
TQ.
hard to know what's going on. you wanna send me your part to info@solidworkstutorials.net?
Brother , please do teach tools drawing area.
next video tonight is about that
How to create a sweep boss. In assembly. Because I had three different sub assemblies. Which combines make one assembly.. Now I have to create a sweep boss (with spline and circle at bottom of spline starting) in assembly, it should pass-through my three different parts. And I don't know how to do that.. So can guide me please?
That'd be tip No.2. Create a new component in the assemble (if you wish) and just take it from there. Treat it as a normal part.
@@with-Aryan it's like I can't create spline (in 2d)which passes through my three areas of assembly and they are at on different planes..here I have to use 3d sketch for that I think?
@@shubhampatidar5982 not necessarily. You could create a 2D spline that does NOT go through all your component FIRST, then after your part is ready, MOVE IT, place it in a way that it DOES go through all your components, then FIX it there using MATES
@@with-Aryan how is this possible any tips pls
Maybe the turbine blade wasnt a flat surface thats why it was not mating.Due to slight curvature it may cause an error.
good catch, yes
I’d love your teaching method. However with all due respect I understand that speaking a different language comes with its downfalls if I may, let me say that your ability to speak English is hindered by your accent, that’s rendering your speech incomprehensibleIn certain areas. Please slow your speech down to 75% of what you normally do and pronounce your words more precisely. Thank you so much
thanks for your honest feedback, duly noted
I think you are the one that has trouble with comprehension...
He talks slowly as it is already. I watch his videos at 1,5 - 2x speed and I can understand everything just fine