That’s great except most sheets are 8’x4’ or 2400x1200 so you need to actually join the base for this to allow for that length plus saw start and finish. Meaning you need to cut 2 pieces to make the base long enough.
Do you like my "Parallel Guided Power Saw?" seen on you tube. Do you wish to join me to manufacture it. On the video you may see some pyramids I cut with my saw, which cannot be easily cut with another saw. The manufacturing company does not want my saw, so we have to start our company to make it.
Do you like my "Parallel Guided Power Saw?" seen on you tube. Do you wish to join me to manufacture it. On the video you may see some pyramids I cut with my saw, which cannot be easily cut with another saw. The manufacturing company does not want my saw, so we have to start our company to make it.
This is great for homeowners and weekend warriors , but if you do this for a living, you buy a good track saw, there's no substitute for accuracy and speed of operation
This is a guess, but probably so he could fit the second side piece on tight against it and screw it down, and when we tool off the bits of tape, the rewound be just enough space for the saw to slide smoothly but not so much that it had room to wiggle side to side.
this tool is not making cutting process simple. its again making complicated steps. the support for the cut piece is must in order to avoid the cut piece falling down.
why go to all that trouble. If he knows the motor side to blade is 100 mm cut and the non motor side is 40mm as my saw is you just clamp the bit od flat bar he had at the beginning to the board?????????? he did it to get the bit of wood in the first place.....OMG
I cut a kitchen cutting board, the white slick one and mounted it to the bottom of the saw. Makes it slide easy and no marks.
Pekerjaan yg sangat bagus dan rapih hasilnya jdi lurus pemotongan kayunya👍
❤❤
the one who can cut with an angle grindeer with this excellence dosnt need a guide for circular saw
How right you are!
I was just thinking that 😂😂😂
Эта шина сильно ускоряет работу.
This project is not for him but for those who cannot cut straight without a guide.. Thanks for the upload..
You gave me a great idea for woodworking. Thanks. I will try this.
All I do is clamp a straight edge 1.5 inches from where I want to cut and hold the saw to it. Simple
Here you can see the exact cut line.
You have your way, others have theirs. End of the day we have a cut piece.
Nice sharing my friend
Great ideas too, I think.
I like the idea of this cutting guide. I will make one. Thanks for your video.
Did you measure the cut piece to see if its true all the way down? Nice job thanks
That’s great except most sheets are 8’x4’ or 2400x1200 so you need to actually join the base for this to allow for that length plus saw start and finish. Meaning you need to cut 2 pieces to make the base long enough.
❤❤
1!!!
Беларусь 👍💪💯
Why dint you sand the surface to make it smooth enabling the saw base to slide easily for the cuts??
Beautiful track for the saw. Thank you for making and posting this video.
Do you like my "Parallel Guided Power Saw?" seen on you tube. Do you wish to join me to manufacture it. On the video you may see some pyramids I cut with my saw, which cannot be easily cut with another saw. The manufacturing company does not want my saw, so we have to start our company to make it.
Респект 👍👍👍👍
Do you like my "Parallel Guided Power Saw?" seen on you tube. Do you wish to join me to manufacture it. On the video you may see some pyramids I cut with my saw, which cannot be easily cut with another saw. The manufacturing company does not want my saw, so we have to start our company to make it.
Think makita needs send you a track rail guide more work involved in your track
Very nice idea my new friend thanks for sharing this with more excellent moves
❤❤❤
Muy buen trabajo y muy útil la guía
Di
Great idea, I'll try...thank you
This is great for homeowners and weekend warriors , but if you do this for a living, you buy a good track saw, there's no substitute for accuracy and speed of operation
stick sand paper to bottom of guide no need for clamps ?
Another person who made this much more difficult than it needs to be.
Difiero de tu dicho es práctica y más seguro que una sierra de mesa
what the measuring tool tat you use at 6.59mins
That's a combination square.
Молодца 👍👍👍
Very nice work ! 👍👍👏👏 Friendship to France
Trabalho fantástico, apenas faltou você nos explicar com fazer a medição do corte na madeira.
Lovely ❤
Wow your idea is great
A very good work 👍👍👍👍
Супер!!! 👍 👍 👍
That's a cool video!!
What material is this?
Ide yang bagus
Muy bien saludos mis respetos
Top de mais parabéns
Oooo
👏👏👏👏👏👍 abraço de Brasil
NICE JOB
Very very Nice job wontherfoul 💫🦅💫🙋
Achei excelente o trab
Tendo ferramenta é fácil de fazer qualquer coisa
Quero ver sem ter nada como é que o cara vai fazer kkk
Wow رائع
Quá chuẩn.
How much is thw cost of circular saw the small one
use tile edging.... much quicker
Perfect tracksaw at 0:04 already. The rest of the video is a waste of time lol
Assim é fácil o cidadão tem todas as ferramentas qualquer um pode fazer isso
Good
فكرة رائعة شكرا جزيلا ارجو لك التوفيق
❤❤❤
why did you apply tape at 3:48?
This is a guess, but probably so he could fit the second side piece on tight against it and screw it down, and when we tool off the bits of tape, the rewound be just enough space for the saw to slide smoothly but not so much that it had room to wiggle side to side.
Nice
رائع
👏👏👏👏🌹
Excellent work
this tool is not making cutting process simple. its again making complicated steps. the support for the cut piece is must in order to avoid the cut piece falling down.
sangat bagus
надо было и на длинном уголке полку напильником стачивать.
Молодец
Miserável 😂 é um gênio.
Tapi bagaimana jika ingin memotong sudut 45 derajat, bukankah akan bermasalah
👍
why go to all that trouble. If he knows the motor side to blade is 100 mm cut and the non motor side is 40mm as my saw is you just clamp the bit od flat bar he had at the beginning to the board?????????? he did it to get the bit of wood in the first place.....OMG
Why doesn't he save the time, and continue using the ruler and clamps from the begining of the video?
👍 OK
makita this machine model number pls
Or naye video uploaded karo sar thanks
👍👌🇰🇿
For the time and money that you spent you would have been farther ahead to just buy one.
👏👏👏✍✍✍👍👍👍🇧🇷🇧🇷🇧🇷
Luiz Carlos
Херата полная. Стоимость материалов равна цене китайской шине, которая все равно будет лучше в разы
to tell the truth - a slot in the middle of the guide is shit
Time waste +saw blades depth lose.
Чё за идиотские звуки курятника???
Only time'waste
Very nice
I did something like this a month ago with plans from Woodglut.