Man that is one mean Saab. My son and I bought a 1991 Saab 900s and we are going to convert it to rear wheel drive. Would be nice to get a list of drive train specs.
Thank you! What a fun project to share with your son! :) Its a long story but I suggest cutting up the floorboard big enough to make room for a drivestaft tunnel and exhaust. Remove the gastank and rear "axle". Make room in the back for a proper rearaxle depending on what you will use. First step (after having your engine setup in the right place) should be to choose gearbox. I used bmw gearbox, driveshaft and rear axle. When you have chose gearbox you need a converter adapter or "simply" swap out the flange that connects it to the engine. This requires precision cutting, measuring and welding. When this is done I would go backward connecting the driveshaft and measuring the length of it. You want it to fit in between gearbox and rear axle perfectly in the right angle. So from here you need to bolt the rear end/axle to your chassie. I built a frame on top of the rearend that I could weld into the chassie when I had it setup where I wanted it. I knew where I wanted it to be by bolting wheels to the rearend and then simply lifting the rearend up into the wheelarcs. The wheels centres the rearend by doing this. I hope it helps a little. Reach out any time if you want tips
This is the perfect saab. All the heart and with added rwd!
Those bumbers have made for bumbing! Nice conversion!
Man that is one mean Saab. My son and I bought a 1991 Saab 900s and we are going to convert it to rear wheel drive. Would be nice to get a list of drive train specs.
Thank you!
What a fun project to share with your son! :)
Its a long story but I suggest cutting up the floorboard big enough to make room for a drivestaft tunnel and exhaust. Remove the gastank and rear "axle". Make room in the back for a proper rearaxle depending on what you will use.
First step (after having your engine setup in the right place) should be to choose gearbox. I used bmw gearbox, driveshaft and rear axle.
When you have chose gearbox you need a converter adapter or "simply" swap out the flange that connects it to the engine. This requires precision cutting, measuring and welding.
When this is done I would go backward connecting the driveshaft and measuring the length of it. You want it to fit in between gearbox and rear axle perfectly in the right angle.
So from here you need to bolt the rear end/axle to your chassie. I built a frame on top of the rearend that I could weld into the chassie when I had it setup where I wanted it. I knew where I wanted it to be by bolting wheels to the rearend and then simply lifting the rearend up into the wheelarcs. The wheels centres the rearend by doing this.
I hope it helps a little. Reach out any time if you want tips
Fyfan aldråg sätt en 90 med 600 häst och bakhjulsdriven. Jag har en gammal 90
Galning hehe
Behöver man göra nått speciellt med saab motererna när dom monteras för bakhjulsdrift? Tänker på typ oljetråg osv
Det funkar för mig med oförändrad oljepickup men alla andra har gjort olika förändringar
Nice ride.
Du Kalle hur gick besiktningen?
Resan gick kanon. Besiktningen sker under närmsta 2 veckorna.
Spännande med besiktning! 😉 Ser fram emot resultatet! 🐻👍🏾
@@akvariekillen mycket spännande!
What had to be done to make that much power with the 202 engine?
Its a b204.
Nothing internally except machining down the pistons so that you can use the b205 head gasket
@@KalleUhr is that the 9000 engine?
@@fridtjofriibe5961 yeah. And its found in the 900ng 1994-1999 aswell
@@KalleUhr what transmission are you using? I assume it’s not a 9000 one
@@fridtjofriibe5961 its a bmw zf 5spd
Vilken dag ska du göra en video som är intressant
När jag vet att du inte tittar
Är denna ens väglaglig?
Det kan du ge dig på
@@KalleUhr så antingen så har bilen 226 hk eller så ljuger du för dina tittare. Enligt trafikverket då.
@@eriknilsson8102 ja du får välja. Den är precis lika laglig som en steg 3 trimmad 9-5.
@@KalleUhr Altså inte då.
Tack för att du tittar och kommenterar!
Critical vibes 😂
They seem a little bit more dangerous than me
Coolt bygge
Tackar!
Tuommonen kauppakassi se olla pitää!!!