Samsung A20/A40/A50/A70 Not Charging, common charging issue explained & fixed
ฝัง
- เผยแพร่เมื่อ 27 ต.ค. 2020
- Hi! This time i will be fixing most common issue on Samsung A series phones that are very popular this year. Almost every week i am getting device with this issue. So lets fix it.
/ hassleforit
Mail in repairs contact me here:
/ wefixgalway - วิทยาศาสตร์และเทคโนโลยี
Thank you for the clear instruction. I had tried re-soldering the tabs on the connector with no improvement. Slightly bending the tabs on the socket did the trick. Many thanks!
Can I have your Whatsapp or messenger...so we will chatt??
Thank you, your video just saved me from an expensive repair. I was about to replace the cable and USB charging port but this trick solved the issue for free. Thank you
I just fixed my phone with your help. I can't thank you enough. You are amazing. 🤩
3 devices here in my shop with same problem.....all fixed with your method, working very well now. Thanks a lot dude, awesome and very clear video.
Many thanks. i was facing this issue for long time until phone could not charge. i replaced charging port but did not work so Later I found this video with simple fix. All working great.
Thanks for info, worked great. I had to check both the top side and the bottom side of the connection cable and bend those back as well like you show and it started charging fine.
Thank you very much, I had the same problem with my phone, was only 8 months old and i took it to 3 mobile phones to get fixed, 1 month later, all 3 said the phone was died and they could do anything and it was best to sell for spare or repair. after looking at your video i spend 30 mins fixing the issue as you showed( only with the magnifying glass. and it working again, saving me about £400 to get a new one. Thank you again, a really good video and saved my phone and all the pictures i didn't back up. Really Really happy. 5*.
glad it helped :)
Thank you very much, your video helped me to fix my broken A70! :)
Supertip - just opened the phone and lifted the ends - working again. 10 minutes work. Thanks.
I have replaced battery, flexcable and usb dock. But the problem of slow or no charge stayed.
Your guidance (only a little bending of the sheet) has done the trick. Thank you very much!
Worked for me on my A70! Great video
My phone was phukt anyway but you just saved me a lot of heartache in that I didnt loose my pics and data. Thank you so much!!
thank you because thanks to you I repaired a70 even though I had bought 2 charging modules for nothing 🤗🤗🤗
Unbelievable, j was thinking to change whole charging conector and main flex, then j just litle bend that peace and its worknig now.. Well done! Thanks!
Thanks a lot. You help me solve the charging issue.
Danke dass du deine Erfahrung teilst, hat super funktioniert! 1000Dank!
Thanks for the trick dude ! Works like a charm on some devices
It worked! Thank you.
thank you , i never realised my flex connector has conpleatly lost all its metal bit like yours but no metal at all , thanks for pointing it out great help my friend hopefully i can do it like you , without having to replace the hole connector ! you have a new subscriber thank you
Glad it helped you!
Asome i fixed my wifes phone with your help :) its charging again
Thank you very much for sharing this amazing content!!
glad you like it!
Thank you. Your weight in gold...
Great explanation, thanks for the video
thankyou man , you just saved me 60 euro , thankyou alot
i had that small part bended to side as soon as i made it straight it started to charge thanks a lot save me money
I've tried all means but my phone just won't charge, now I know why. Thank you for sharing this!
Thanks worked for me ❤️❤️
Hey man great fix. I see a lot of other videos where they run the wire all the way down to the charging port board also. I tried that fix and i got a boot loop. When i saw your video i removed the solder joint on the bottom and did it like you show and bingo it worked perfectly.
jumper is stupid, you can just make extension from existing flex to board if you want to have hardwire charging :D
@@hassleforit5683 that was my first time doing micro solder. I just used a regular solder iron but i would like to get some supplies for soldering… for example one of those metal sheets that you use to make the little squares on the chips before you solder them down and i want an actual micro solder station… do you have any good links to places i can find those things? Also i want a microscope like yours too are they expensive?
Спасибо! I believe you're Russian by the accent, hence thanking in Russian! I was able to fix charging issue with this method, thanks God Ihad tiny tools and needle to just expand this. Keep the good work!
Thanks you for the info it was really helpful
Thank you!!! This video helped a lot when fixing A70. Although is it really important to add the wire? I did it without putting wire and it started working. Thanks anyway!
I am too facing same problem.. thank you
thank you a lot!!!
The Best, i have the same problem !
Thanks you solve my problem
thanks, my connector broke too, soldetring a cable did the job.
thanks a LOT. helped me solve
Thank you for the clear instruction
where you plugged the flex cable you see there are small pins
some of those pins broke. will it be a easy fix?
i would appreciate if you could tell me a bit about it or if you have any videos on it
Hi, your videos are really helpful. Does this method apply to Samsung a52 for example?
thank you dear sir it works
¡Muchísimas gracias!
Thank you 🇮🇳
Many thanks 👍
Very nice
Thanks for that
Sir why you're not uploading videos... Please upload more videos... I watched all your videos.... Need more....
Thanks a lot. I didn't have to disassemble my phone, I just gently pressed in the approximate area where connectors were, and it started charging!
But it will stop charging again if you just pressed...
It did that for me too! I’m so glad I saw this comment because no chance I could take my phone apart
Thanks. I could fix my a41. Thank you so much.
Can you please share the small charger monitor tool you're using?
Perfect sir
Hi! I have these charging issues with my A40 since weeks. Sometimes, it does not want to charge. The "funny" thing is: when I go to a repair store, they plug it in (with their charger or my charger) and it works. After I returned home, it still works properly for few weeks. untill the prob occurs again. But today, after I returned from store, i uploaded for some time and then stopped. Somehow, I feel bullied by my mobile. :-))) So now I will open it and try your tipp.
good luck :)
@HassleForIt Thx! There was nothing kaputt as in your example. I bended the ends a bit up and reassembled it. Unfortunately, it still does not work. hmmm... :-/
@@staycurious0815 your case might be different, order a charging port from ebay, try new cable, new plug. or buy a broken phone and replace screen from yours, as screen is most expensive part. :)
@@hassleforit5683 i tried with a new cable, but still did not work. I will have to visit a repair store today.
Very nice wok🌹
Thanks
what were you melting on the phone itself? what was that stuff,wax or flux?
I love ur teaching, how can I get ur direct contact for some assistance Incase i have some cases like this
Hi... Thank you, that was really helpful... fixed it by just bending the contact
I have one question regarding assembling back... do I need to use some specific glue to hold back pannel or just heating and put it back it's usually how everybody does this?
Samsung A40
@@ruslandr if you have good factory sticker left then you can just heat and assemble, if factory sticker is damaged i recommend to remove it and use something like B7000 or similar.
Hi there from Spain, i just started to follow you but i ve already watched your videos before. what s the solution if you make the jumper but voltage indicator is going up and down 4.xx to 3.x to 1.x than back to 4 and so on? thanks in advance for your help.
Good work,thanks,can you tell me which microscope you use?
sticker actually worn out on microscope so i dont know what exactly it is but from amscope simufocal
@@hassleforit5683 Thanks
Enjoyed the vid, where did get the amp meter?
aliexpress
Hey, I would have a question. I am solving the charging problem with this phone. Nothing of this helps. The phone starts working and charging ONLY after I disconnect and reconnect the battery back. Any ideas? As far as I know, it is definitely not a cable or connector. Looks like some kind of other problem.
عالی بود
fantastic work, but if i have to do the same with my cell phone pfffff... it will be a little more difficult without a microscope. Wil my Samsung A70 has been playing crazy for two days because of charging, once it doesn't charge again or only for a short time and since today the cell phone doesn't want to charge the battery at all anymore. I've already cleaned the charging plug, tried another cable, another charger, nothing helps😓😓😓😓😓
Where are you from?
My a71 have issue like that and it has many missing pieces than that
i ordered charging board. when charging board came. problem didn't solve. i try to tweak the cable pin a bit. turns out that small tweak solve the charging problem. well...i guess the money spent on new charging board i assume a fee to the lesson.
Dear sir, samsung A70 had charging problem. the acupressure therapy worked for some time. Now it refuses to carge. took it to local repairer-He said it could be problem with socket and its holder,we have to replace it. i agreed. After a day the repairer said the motherboard has a crack and the repair estimate doubled. I asked to leave phone as it is.The battery is totally exhausted and is lying with me without life. Can you pl guide me to make it live,any trick ,??????? please guide I am in BARODA ,GUJARAT, INDIA.Thank you - BRP
help me my samsung A20 decreasing my percent battery while charging
its not charging then, probably 5v is not going to board and your charging sing appears from data connection only(2v and 1v), thats why percentage is decreasing.
tşk
It’s not all time that same problem put most
Cheers mate!
What if all is broken?
if you have to many pins gone you will have to re-solder new FPC connector or make jumpers from Flex to board.
@@hassleforit5683 what jumper im gonna use?
@@kimgaibrielMoba i usually use from earpiece or haptic engine. 0.01m wire should do as voltage there is low, if you want you can fold it in half to make it thicker.
@@hassleforit5683 thanks, ur a big help for me
I'm honestly just not buying Samsung anymore...every Samsung I have had always had charging issues
yes, very common issue these days
It’s not working when using fast charging 😂